Hodedah HIBT 70-HB User manual

1
Hodedah
www.hodedah.com
support @hodedah.com
HIBT 70 - HB
L42 28'' X D84 78'' X H35''
(M/S - 39" X 75")
HIBT70-FB & SR
HIBT70-HB

PART & HARDWARE LIST
2
CAP
Hodedah
www.hodedah.com
support @hodedah.com
APLASTIC DOWEL M8 X 25MM 22
B
CSK CAP M6 X 40MM 8
POWER NAIL 6/8 28
14
G1 G2
C
DCB SCREW M4 X 30MM 6
MINIFIX 5654 7+7
1
ALLEN KEY
E
1
23
4
6
7
8
5
PLASTIC PIN 6
F
G
H

3
- This product contains small components, please ensure that they are
kept away from small children.
- THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY
INFORMATION. PLEASE READ AND KEEP FOR FUTURE
REFERENCE.
STOP
DO NOT RETURN PRODUCT TO THE STORE.
If a part is missing or damaged, email our customer
service. We will gladly ship your replacement parts
FREE of charge.
email us at
[email protected]
For prompt, reliable service; please have your
assembly manual ready.
Need Parts or Assistance?
Hodedah
www.hodedah.com
support @hodedah.com

4
Thank you for purchasing from Hodedah
To learn more about hodedah and our products visit
www.hodedah.com
READ BEFORE BEGINNING ASSEMBLY
- Read each step carefully. It is very important that each step of instruction is performed in the
correct order. If these steps are not followed in sequence, assembly difficulties will occur.
- Make sure all parts are included. Most parts are labeled or stamped on the raw edge.
- Work in spacious area, preferably on a carpet, near the place the unit will be used.
- Do not use power tools to assemble your furniture. Power tools may strip or damage the parts.
HELPFUL HINTS
- Call us if you need assistance.
- Move your new furniture carefully, with two people lift and carry the unit to it's new location.
- Never push, drag or pull your furniture (especially on carpet).
Warranty Information
Hodedah warrants this product to be free from defects in material and workmanship agrees to
remedy any such defect. This warranty covers one year from the date of original purchase. This is
solely limited to be repair or replacement of defective parts and no assembly labor is included.
This warranty does not apply to any product which has been improperly assembled, subjected to
misuse or abuse or which has been altered or repaired in any way.
To obtain warranty, purchaser must present original bill of sale. Components repaired or
replaced warranted through the remainder of the original warranty period only. The defective
components will be repaired or replaced without charge, subject to the terms and conditions
described above.
For help with assembly, identifying parts, product information or to
order parts, please contact us :
Call us at :
718-456-0505
Monday - Friday
9:00am - 5:00pm
Visit our website :
www.hodedah.com
Hodedah
www.hodedah.com
support @hodedah.com

G2
1
3
4
2
6
5
2
C
6
1
7
3
STEP 1
Hodedah
www.hodedah.com
support @hodedah.com
6
A
5
- Insert 22 x Plastic dowel (A) into Panels (1), (2) (3), (4), (5) & (6) using a plastic hammer.
- Knock 6 x Plastic pin (C) into panels (1), (2) & (6) base by using a plastic hammer.
- Insert 1 x Minifix 5654 (G2) into Panel (3) base using a Philips head screwdriver.
- Insert 6 x Minifix 5654 (G2) into Panel (7) base using a Philips head screwdriver.
PLASTIC DOWEL M8 X 25MM 22 CPLASTIC PIN 6
CPLASTIC PIN
7
G2 MINIFIX 5654
G2
A
BOTTOM VIEW

- Attach Panel (4) & (5) into Panel (2).
- Attach Panel (1) & (3) into Panel (2). Insert 4 x Csk Cap M6 x 40 (D), tighten with Allen key (F). Insert
4 x Cap (E).
- Insert 1 x Minifix (G1) into Panel (3) base & tighten with Philip head screw driver.
- Attach Panel (6) into Panel (1), (3), (4) & (5). Insert 4 x Csk Cap M6 x 40 (D), tighten with Allen key (F). Insert
4 x Cap (E).
- Attach panel (7) to panels (1) & (6), insert 6 x Minifix (G1), tighten with Allen key (F). Insert 6 x Cap (E).
STEP 2
Hodedah
www.hodedah.com
support @hodedah.com
D
6
CSK CAP M6 X 40MM 8ALLEN KEY 1
F
7
G1 MINIFIX 5654
CAP 14
EG1
3
5
4
1
7
6
BACK VIEW
BACK VIEW
2
2
FG1 F
EFD
E
F
D
FG1 F

STEP 3
7
Hodedah
www.hodedah.com
support @hodedah.com
Job Complete !
In the interest of our environment please dispose of all packaging throughtfully.
- Attach Panel (8) into Panel (1), (2) & (6). Use 28 x Power nail (B) for fix it. Knock by using a Hammer.
- Connect completed bed with completed Headboard. Insert 6 x CB Screw M4 x 30mm (H) into panel (1)
& both Side rail Panel. tighten with Philip head screw driver.
BPOWER NAIL 68"28
8
HIBT70-FB & SR
HCB SCREW M4 X 30MM 6 HCB SCREW M4 X 30MM 6
HIBT70-FB & SR
HIBT70-HB
B
H
SIDE RAIL
SIDE RAIL
6
2
1