Hodedah HI 917N User manual

1
Hodedah
www.hodedah.com
support @hodedah.com
HI 917N
L17'' X D15 48'' X H1918''

PART & HARDWARE LIST
2
CAP
Hodedah
www.hodedah.com
support @hodedah.com
APLASTIC DOWEL M8 X 25MM 16
B
CSK CAP M6 X 40MM 4
POWER NAIL 6/8
PVC LEG STUD (LEFT & RIGHT)
L
HANDLE 2838 (PVC)
32
J
4+4
8
4
L1
L2
I1 I2
C
CB SCREW M3.5 X 12MM 28
D
E
CB SCREW M4 X 25MM 4
F
CB SCREW M4 X 35MM 20
G
MINIFIX 5654
P/H SCREW M4 X 36MM
DRAWER SLIDE 14"
1
ALLEN KEY
H
K1
I4
2
K2
2+2

3
- This product contains small components, please ensure that they are
kept away from small children.
- THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY
INFORMATION. PLEASE READ AND KEEP FOR FUTURE
REFERENCE.
STOP
DO NOT RETURN PRODUCT TO THE STORE.
If a part is missing or damaged, email our customer
service. We will gladly ship your replacement parts
FREE of charge.
email us at
[email protected]
For prompt, reliable service; please have your
assembly manual ready.
Need Parts or Assistance?
Hodedah
www.hodedah.com
support @hodedah.com

4
Thank you for purchasing from Hodedah
To learn more about hodedah and our products visit
www.hodedah.com
READ BEFORE BEGINNING ASSEMBLY
- Read each step carefully. It is very important that each step of instruction is performed in the
correct order. If these steps are not followed in sequence, assembly difficulties will occur.
- Make sure all parts are included. Most parts are labeled or stamped on the raw edge.
- Work in spacious area, preferably on a carpet, near the place the unit will be used.
- Do not use power tools to assemble your furniture. Power tools may strip or damage the parts.
HELPFUL HINTS
- Call us if you need assistance.
- Move your new furniture carefully, with two people lift and carry the unit to it's new location.
- Never push, drag or pull your furniture (especially on carpet).
Warranty Information
Hodedah warrants this product to be free from defects in material and workmanship agrees to
remedy any such defect. This warranty covers one year from the date of original purchase. This is
solely limited to be repair or replacement of defective parts and no assembly labor is included.
This warranty does not apply to any product which has been improperly assembled, subjected to
misuse or abuse or which has been altered or repaired in any way.
To obtain warranty, purchaser must present original bill of sale. Components repaired or
replaced warranted through the remainder of the original warranty period only. The defective
components will be repaired or replaced without charge, subject to the terms and conditions
described above.
For help with assembly, identifying parts, product information or to
order parts, please contact us :
Call us at :
718-456-0505
Monday - Friday
9:00am - 5:00pm
Visit our website :
www.hodedah.com
Hodedah
www.hodedah.com
support @hodedah.com

STEP 1
APLASTIC DOWEL M8 X 25MM 16
5
Hodedah
www.hodedah.com
support @hodedah.com
- Insert 16 x Plastic dowel (A) into Panels (1), (2) (3), (4), (5) & (6) using a plastic hammer.
- Assemble 4 x Drawer slide (L1) to Panel (1) & (6) with 12 x CB Screw M3.5 x 12m (B) using Philips head
screwdriver.
- Insert 4 x CB Screw M4 x 25mm (C) to 2 x Panel (9) back using a Philips head screwdriver.
A
L1
C4
LEFT VIEW RIGHT VIEW
1
4
6
3
2
5
169
9
BCB SCREW M3.5 X 12MM 12 L1 DRAWER SLIDE 14"
L
CB SCREW M4 X 25MM
BC
4

STEP 2
6
Hodedah
www.hodedah.com
support @hodedah.com
2
20 HANDLE 2838 (PVC)
P/H SCREW M4 X 36MM 4
K1
K2
POWER NAIL 68"12
D
K2
K1
911
10
11
F
12
13
D
D
F
CB SCREW M4 X 35MM
- Attach 2 x Panel (11) into Panel (9). Then, attach 1 x Panel (10) into both Panel (11) & insert 8 x CB Screw
M4 x 35mm (D) using a Philips head screwdriver. Repeat for the next Drawer box.
- Attach 2 x Handle 2838 (K1) to Panel (9) front with 4 x P/H Screw M4 x 36mm (K2) using a
Philips head screwdriver.
- Slot 1 x Panel (12) into Panel (11) groove & use 6 x Power nail (F) for fix it. Knock by using a hammer.
Repeat for the next Drawer box.
- Attach 1 x Panel (13) into the base of Drawer box. Insert 2 x CB screw M4 x 35mm (D) using a Philips
head screwdriver. Repeat for the next Drawer box.
11
11

STEP 3
7
Hodedah
www.hodedah.com
support @hodedah.com
B
4
CB SCREW M3.5 X 12MM 12
L2
CSK CAP M6 X 40MME 2
1
2
CAP
DRAWER SLIDE 14"
ALLEN KEY
I2
L2
B
BOTTOM VIEW
7
425
3
1
JHE
G
J
I2 4MINIFIX 5654
- Assemble 2 x Drawer slide (L2) to both Panel (11) with 6 x CB Screw M3.5 x 12m (C) using Philips head
screwdriver. Repeat same step for the next Drawer box.
- Insert 4 x Minifix 5654 (I1) into Panel (7) base using a Philips head screwdriver.
- Attach Panel (2) & (4) into Panel (1).
- Attach Panel (3) & (5) into Panel (1) with 2 x CSK Cap M6 x 40mm (E) & tighten with Allen Key (G).
Insert 2 x Cap (J).
11
11
L2
I2

STEP 4
8
Hodedah
www.hodedah.com
support @hodedah.com
EGJ
6
H
B
I1 G
J
7
B CB SCREW M3.5 X 12MM 4
CSK CAP M6 X 40MME 2
1
4
ALLEN KEY
G
PVC LEG STUD (L&R)
H
6
CAP
J
I1 MINIFIX 5654
I1
2+2
- Attach Panel (6) into Panel (2), (3), (4) & (5) with 2 x CSK Cap M6 x 40mm (E) & tighten with Allen Key (G).
Insert 2 x Cap (J).
- Fix 2 x Pvc leg stud (H) into Panel (1) & (6) left side with 2 x CB Screw M3.5 x 12mm (B) & tighten with
Philip Head Screw driver.
- Fix 2 x Pvc leg stud (H) into Panel (1) & (6) right side with 2 x CB Screw M3.5 x 12mm (B) & tighten with
Philip Head Screw driver.
- Attach panel (7) to Panels (1) & (6), insert 4 x Minifix (I1), tighten with Allen key (G). Insert 4 x Cap (J).
6
1
6
1

STEP 5
9
Hodedah
www.hodedah.com
support @hodedah.com
BACK VIEW
F
8
9
9
- Fix 1 x Panel (8) into the back of Night Stand & use 20 x Power nail (F) for fix it. Knock by using a hammer.
- Slide the drawer box into the drawer slide at the Panel (1) & (6).
POWER NAIL 68"20
F
Job Complete !
In the interest of our environment please dispose of all packaging throughtfully.