HOMCOM 820-274 Technical manual

INcjd091_UK
USING INSTRUCTION
Operation Instruction for
Oil Filled Radiator
820-274_820-269_820-272
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY

WARMER INSTRUCTION
Thank you for choosing our warmer, please read this instruction carefully before operating
and keep it for future reference.
I. Product characteristics
◆Our electrothermal warmer operates as follows: tubular element is taken as heat source,
efficient and permanent heat conduction oil is taken as the medium, heat eliminates via
radiation fin, room temperature is increased via air circulation.
◆Our electrothermal warmer has the following advantages: convenient, safe, beautiful,
tranquil operation, without electromagnetic disturbance etc. It is suitable for such locations
as scientific research room, hospital, hotel, training practice house, and bedroom, etc. The
warmer keeps your room or office more comfortable in cold seasons!
II. Product structure diagram
III.Operation instruction
Mounting:
Take out the warmer and all the parts from packing carton.
1. Make the warmer be on its head
2. Place the footplate on the top of both radiation fins
3. Secure the footplate on the warmer with specified U type bolt and wing nut
4. Tighten the screw
5. Make the warmer stand erect
Placing:
The warmer should be away from the wall or other objects such as furniture, curtain at
least 90cm; do ensure that the power supply corresponds to that on the nameplate; the
temperature controller switch and power switch are at “OFF” position; plug in the attaching
plug.
2

1.The temperature controller can regulate room temperature.Turn the temperature control-
ler clockwise to increase the temperature; turn it anti-clockwise to reduce the temperature
until appropriate temperature is reached.
2.Power switch is pressed switch:
a>With power switchⅠpressed, indicates Level Ⅰpower.
b>With power switchⅡpressed, indicates Level Ⅱpower.
c>With both power switch Ⅰand Ⅱpressed, indicates Level Ⅲpower.
3.The case when you will no longer use the oil-heater, press the power button to initializ-
tion Position, Turn the temperature Knob into the minimum position and take off the Plug.
Note: the warmer operates via heat elimination of heat conduction oil, and the oil cools out
slowly after the warmer is turned off, so do not move the warmer unless the oil has cooled
out, and move the warmer with the handle.
Cleaning
1.Please disconnect power supply before cleaning.
2.Wipe the outside of the warmer with wet cloth at first, and then dry it with a piece of soft
cloth.
Do not use wax or brush polish, since these will react with the warmer, resulting in discol-
oration.
Safety protection
1. Do not cover the warmer during operating, otherwise it will result in fire.
2. The warmer should be away from the wall or other flammable objects such as furniture,
curtain, bed sheet or clothes at least 90cm.
3. Do not disassemble radiation fin.
4. Take care of your children when they are near or use the warmer.
5.Do not let power line contact damp or hot objects; do not wind or let child come near the
power line.
6.Do not use the warmer in open air.
7.Do not let the warmer contact hot gasoline or electric burner.
8.Do not use damaged wire or plug; do not use damaged warmer unless it is repaired.
3

9.Do not remove button parts of the warmer.
10.This warmer is only suitable for use in the room.
11.After dust removal, the oil left on the surface should be removed.
IV.Warning
1. If the supply cord is damaged, it must be replaced by the manufacturer or its service
agent or a similarly qualified person in order to avoid a hazard.
2. The heat must not be located immediately below a socket-outlet.
3. Don’t use this heater in the immediate surroundings of bath, a shower or a swimming
pool.
4. This heater is filled with a precise quantity of special oil. Repairs requiring opening of
the oil container are only to be made by the manufacturer or his service agent who should
be contacted if there id an oil leakage.
5. Regulations concerning the disposal of oil when scrapping the appliance have to be
followed. Please, don't throw away and be burnt on purpose.
6. WARNING: In order to avoid overheating do not cover the heater.
7. This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use of the appliance by a person
responsible for their safety.
8. Children should be supervised to ensure that they do not play with the appliance.
Correct Disposal of this product
This marking indicates that this product should not be disposed with other household
wastes throughout the EU. To prevent possible harm to the environment or human
health from uncontrolled waste disposal, recycle it responsibly to promote the
sustainable reuse of material resources. To return your used device, please use the
return and collection systems or contact the retailer where the product was purchased.
They can take this product for environmental safe recycling.
Type Number
of
radiating
fins
Rated
voltage
(V)
Frequency
(Hz)
Rated
power
input (W)
Power in
Level Ⅰ
(W)230V
Power in
Level Ⅱ
(W)230V
Total input
power in
Level Ⅲ
(W)230V
HD984-R5Q 5 220-240 50/60 910-1100 400 600 1000
HD984-R7Q 7 220-240 50/60 1370-1630 600 900 1500
HD984-R9Q 9 220-240 50/60 1830-2180 800 1200 2000
HD984L-R11Q 11 220-240 50/60 2000-2400 1000 1200 2200
HD984B-R11Q 11 220-240 50/60 2290-2720 1000 1500 2500
HD984B-R13Q
13
220-240
50/60
2290-2720
1000
1500
2500
HD984B-R15Q 15 220-240 50/60 2560-3050 1200 1600 2800
V.Technical parameters
4