Home Decorators Collection MERWRY SW1422 User manual

USE AND CARE GUIDE
1-800-986 3460
HOMEDEPOT.COM/HOMEDECORATORS
THANK YOU
MERWRY LED 48 INCH CEILING FAN
Item #XXXXX
Model #SW1422/48in/WH
Questions, problems, missing parts? Before returning to the store,
call Home Decorators Collection Customer Service
8 a.m. - 7 p.m., EST, Monday-Friday,
9 a.m. - 6 p.m., EST, Saturday

Installing the light kit plate.....................................................12
Installing the LED assembly and glass shade........................ 13

WARNING：To reduce the risk of fire or electric shock, this
fan should only be used with fan speed control part No.:DL-
1167RYS-02, manufactured by S.Q.M Co Ltd.

48 in.(1,22 m)
Low
Medium
High
120
Fan size WattsRPM CFMSpeed VoltsAmpsN.W. G.W. C.F.
0.24
0.35
0.46
15.68
29.67
54.79
93
141
188
2069
3298
4572
1.52 ft.
7.09 kg
(15.6 lb)
7.96 kg
(17.51 lb)

preassembled with hanger ball and downrod
preassembled in downrod
preassembled in downrod
15 + 1 spare
15 + 1 spare

Disconnect power by removing the ‘FUSE’ or turning
OFF the breaker depending on the type of Electrical
panel in your home
ceiling joist

Place the slots (NN) from the mounting bracket (B)
over the two mounting screws provided with
the outlet box.
Slide the mounting bracket (B) until it locks in
place at the narrow section of the slots (NN).
Securely tighten the two mounting screws
provided with the outlet box.
OUTLET BOX
OUTLET BOXOUTLET BOX
OUTLET BOX
OUTLET BOX
NN
NN
NN
NN

Remove one screw (KK) from the mounting bracket (B) but
DO NOT discard it because it will be used again in coming
step. Loosen the other screw (KK) approximately 1/4 turn.
CAUTION:Do not cut the antenna wire (QQ) of receiver.
PP
check groove (OO)
PP
E
F
OO
QQ

Assembly --Installing the Light Kit Plate

RR
RR
Assembly —Installing the LED Assembly and Glass Shade
Pay attention to the black arrow on the LED assembly (J)
Raise glass shade (K) up against the LED assembly and align
the black arrow on the glass shade (K) to the black arrow on
the LED assembly (J)
Secure the glass shade (K) to the light kit plate (I) by
turning it clockwise.(Fig.3)
J
J
K
I
I
K
Installing the glass shade

SS
SS