Home Decorators Collection BARDEN 269-218-463-Y User manual

THANK YOU
We appreciate the trust and confidence you have placed in Home Decorators Collection through the purchase of this Barden collection
electric fireplace media mantel. We strive to continually create quality products designed to enhance your home. Visit us online to see our
full line of products available for your home improvement needs. Thank you for choosing Home Decorators Collection!
USE AND CARE GUIDE
BARDEN COLLECTION: ELECTRIC FIREPLACE MEDIA MANTEL
Questions, problems, missing parts? Before returning to the store,
call Home Decorators Collection Customer Service
8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday
1-800-986-3460
HOMEDEPOT.COM/HOMEDECORATORS
IMPORTANT INSTRUCTIONS
PLEASE READ THIS MANUAL BEFORE INSTALLING AND USING APPLIANCE
WARNING!
IF THE INFORMATION IN THIS MANUAL IS NOT FOLLOWED EXACTLY, AN ELECTRICAL SHOCK OR FIRE MAY RESULT
CAUSING PROPERTY DAMAGE, PERSONAL INJURY OR LOSS OF LIFE.
INSTALLER: Leave this manual with the appliance.
CONSUMER: Retain this manual for future reference.
Model # 269-218-463-YItem # 1005228146
200420

2
Table of Contents
Table of Contents....................................2
Warranty ..........................................2
Pre-Assembly ......................................3
Planning Assembly .................................3
Tools Required ....................................3
Hardware Included .................................3
Package Contents..................................4
Assembly ..........................................5
Care and Cleaning ..................................11
Shelf Weight Capacity ...............................11
Service Parts ......................................12
Troubleshooting....................................13
1-YEAR WARRANTY
WHAT IS COVERED
The manufacturer warrants that your new electric replace is free from manufacturing and material defects for a period of one year from
date of purchase, subject to the following conditions and limitations.
This electric replace must be installed and operated at all times in accordance with the instructions furnished with the product. Any
alteration, willful abuse, accident, or misuse of the product shall nullify this warranty. This warranty is non-transferrable, and is made to the
original owner, provided that the purchase was made through an authorized supplier of the manufacturer. This warranty is limited to the
repair or replacement of part(s) found to be defective in material or workmanship, provided that such part(s) have been subjected to normal
conditions of use and service, after said defect is conrmed by the manufacturer’s inspection. The manufacturer may, at its discretion, fully
discharge all obligations with respect to this warranty by refunding the wholesale price of the defective part(s).
WHAT IS NOT COVERED
Any installation, labor, construction, transportation, or other related costs/expenses arising from defective part(s), repair, replacement,
or otherwise of same, will not be covered by this warranty, nor shall the manufacturer assume responsibility for same. Further, the
manufacturer will not be responsible for any incidental, indirect, or consequential damages, except as provided by law.
All other warranties - expressed or implied - with respect to the product, its components and accessories, or any obligations/liabilities on
the part of the manufacturer are hereby expressly excluded. The manufacturer neither assumes, nor authorizes any third party to assume,
on its behalf, any other liabilities with respect to the sale of this product. The warranties as outlined within this document do not apply to
nonmanufacturer accessories used in conjunction with the installation of this product.
This warranty does not cover the lightbulb(s) included with the replace.
This warranty is void if: the replace has been operated in atmospheres contaminated by chlorine, uorine, or other damaging chemicals;
the replace is subjected to prolonged periods of dampness or condensation; the replace is altered, willfully abused, damaged by accident,
or misused in any way.
If warranty service is needed, contact the Customer Service Team at 1-800-986-3460 from 8 a.m. - 7 p.m., EST, Monday-Friday,
9 a.m. - 6 p.m., EST, Saturday or visit www.homedepot.com/homedecorators.
Make sure you have your warranty, your sales receipt, and the model/serial number of your product.
DO NOT ATTEMPT TO DO ANY SERVICE WORK YOURSELF.
Warranty
This Product can expose you to chemicals including Diisononyl phthalate (DINP) which is known to the State of California
to cause cancer and Di-isodecyl phthalates (DIDP) which is known to the State of California to cause birth defects or other
reproductive harm.
For more information go to www.p65Warnings.ca.gov
WARNING

3
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance
Pre-Assembly
Part Description Quantity
AA Bolt 22
BB Wood Dowel 12
CC Back Panel Screw 30
DD Handle 2
EE Shelf Pin 8
FF Screw 4
GG Hinge 4
HH Hinge Screw 8
PLANNING ASSEMBLY
Before you begin assembly, locate the instructions and hardware. Compare all parts with the Hardware Included and Package Contents lists.
Be sure you have all the parts and can identify them. A helping hand is always good. Assemble your mantel with an adult assistant if pos-
sible. Some pieces are heavy and will need to be held by a helper. Assembly time will take approximately 30-60 minutes.
Before assembly, use scissors to unwrap the parts from the packaging. Do not use a box cutter or exacto-knife, as you may cut into the
mantel pieces inside the box and damage the nish. Check for the red hardware bag located inside the packaging. Do not discard any
pieces. Use an appropriate screwdriver to insert and tighten all screws.
TOOLS REQUIRED
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
Safety goggles Phillips screwdriver
AA BB CC EE FF GG HHDD

4
Pre-Assembly (continued)
PACKAGE CONTENTS
Part Description Quantity
A Top Panel 1
B Base Panel 1
C Media Shelf 1
D Left Side Panel 1
E Right Side Panel 1
F Left Upper Inside Panel 1
G Right Upper Inside Panel 1
H Left Inside Panel 1
Part Description Quantity
J Right Inside Panel 1
K Front Firebox Support 1
L Firebox Support 2
M Adjustable Shelf 2
N Upper Back Panel 1
P Back Panel 2
Q Cabinet Door 2
N
P
P
A
F
G
C
E
D
M
M
J
H
L
L
K
Q
B
Q

5
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance
Assembly
AA
AA
K
L
L
B
B
1
Attaching the Base
□Locate the base panel (B) and place on a soft surface to
protect the nish.
□Locate the base panel (B). Attach the insert panel (K) to
the base panel (B) by inserting two bolts (AA) through the
connectors and turning clockwise. Do not strip the bolts
(AA) by overtightening.
2
Attaching Insert Support
□Locate the two insert supports (L) and attach to the
base panel (B) by inserting two bolts (AA) through
the connectors. Do not strip the bolts (AA) by
overtightening.

6
Assembly (continued)
3
Attaching Left and Right Inside
Panel
□Locate the Left and Right Inside Panel (H & J) and attach
to the base panel (B) by inserting four dowels (BB) into
the provided holes.
□Insert two bolts (AA) through the connectors and turn
clockwise. Do not strip the bolts (AA) by overtightening.
4
Attaching Left and Right Side
Panel
□Locate the media shelf (C) and attach the left and right
side panel (D & E) to the media shelf (C) by inserting
four bolts (AA) through the connectors and turning
clockwise. Do not strip the bolts (AA) by overtightening.
AA
B
J
BB
H
D
C
E
AA

7
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance
Assembly (continued)
5
Attaching Media Shelf
□Attach the left and right side panel (D & E) and media
shelf (C) to the base panel assembly by inserting four
dowels (BB) in the provided holes.
□Insert six bolts (AA) through the connectors and
turn clockwise. Do not strip the bolts (AA) by
overtightening.
6
Attaching Left and Right Divider
□Locate the left and right dividers (F & G) and attach to the
media shelf by inserting four dowels (BB) in the provided
holes.
□Insert four screws (FF) through the inside of the media shelf
and into the left and right dividers (F&G).
BB
AA
AA
BB
FF
F
G
D
H
J
C
C
B
E

8
Assembly (continued)
7
Attaching the Top Panel
□Locate the top panel (A) and carefully place on top of
the media shelf assembly.
□Insert six bolts (AA) through the connectors and
turn clockwise. Do not strip the bolts (AA) by
overtightening.
8Attaching the Back Panels
□Locate the upper back panel (N) and one align it with the
back of the media console with the nished side facing up.
Insert and tighten fourteen back panel screws (CC) to the
media console.
□Locate the side panels (P) and one align them with the
sides of the back of the media mantel. Insert and tighten
eight back panel screws (CC) to each side panel (P)
□Do not strip the back panel screws (CC) by overtightening.
AA
A
N
P
CC
P
D
F
G
E
AA

9
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance
Assembly (continued)
9 Preparing the Doors
□Locate the two doors (Q) and place on a soft surface
to protect the nish.
□Attach the two hinges to the doors (Q) by inserting
four hinge screws (HH). Repeat this step for the
second door (Q). Do not trip the hinge screws (HH) by
overtightening.
10
Attaching the Doors to the
Mantel
□Attach the two doors (Q) to inside of the mantel by
tightening the screws on the hinge. Do not strip the
hinge screws (DD) by overtightening.
□Open and close the doors to ensure they are aligned
and shut correctly. If necessary, adjust the screws
for a good t.
Qx2
HH
Q
1
2
Q
HH
GG
D
E

10
Assembly (continued)
11
Attaching the Handles
□Attach the handles (DD) to the left and right side
cabinet doors by inserting two screws through the
doors and turning clockwise into the knobs (DD).
Do not strip the screws by overtightening.
12
Installing the shelves
□Insert eight shelf pins (EE) into the interior of
the side panels. Insert the pins parallel to one
another to ensure the shelves are level.
□Insert the two shelves (M) onto the shelf pins
(EE).
DD
EE
M
M
Q
Q

11
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance
Assembly (continued)
Care & Cleaning
□Always turn the heater OFF and unplug the power cord from the outlet before cleaning.
□Cleaning of the control panel, located in the upper right-hand corner of the replace behind the sliding control panel cover, is to be
done only using a soft cloth, slightly dampened in water (if needed, a small amount of dish soap can be added to the water) and dried
using a clean, dry soft cloth. Cleaning of the screen diffuser is to be done using only water and lint free cloth. DO NOT use any abrasive
cleaners on the diffusing screen.
Shelf Weight Capacity
95 lbs (43.1 kg)
50 lbs (22.7 kg)
20 lbs (9.1 kg)
50 lbs (22.7 kg)
13
Installing the rebox
□Insert the rebox into the media console through the
back opening.
□Push the rebox forward through the back opening
until the metal trim of the rebox in ush with the
side panels.
□Once the rebox is in position attach the two
mounting brackets included with the rebox by
inserting and tightening four screws through the
mounting brackets into the rebox and the base
panel.
□Do not strip the screws by overtightening.

12
Service Parts
Part Description Quantity Part Number
A Top Panel 1 20-01-360
B Base Panel 1 20-01-361
C Media Shelf 1 20-01-362
D Left Side Panel 1 20-01-363
E Right Side Panel 1 20-01-364
F Left Upper Inside Panel 1 20-01-365
G Right Upper Inside Panel 1 20-01-366
H Left Inside Panel 1 20-01-367
Part Description Quantity Part Number
J Right Inside Panel 1 20-01-368
K Front Firebox Support 1 20-01-369
L Firebox Support 2 20-01-370
M Adjustable Shelf 2 20-01-371
N Upper Back Panel 1 20-01-372
P Back Panel 2 20-01-373
Q Cabinet Door 2 20-01-374
N
P
P
A
F
G
C
E
D
M
M
J
H
L
L
K
Q
B
Q

13
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance
Troubleshooting
If you have any questions regarding the product, please call Home Depot Customer Service, 1-800-986-3460, 8 a.m. – 7 p.m. EST,
Monday – Friday, 9 a.m. - 6 p.m., EST, Saturday.
Problem Possible Cause Solution
Display shows”E1” The thermostat sensor is broken or
disconnected.
Unplug the replace, remove the panel
assembly of the replace and check that
the thermostat is plugged into the main
circuit board. If this does not solve the
problem contact customer service for a
replacement thermostat sensor.
The heater is not operating. Manual reset overheat protection has
triggered.
Inspect the heater and check that the
air inlets and outlets are not blocked as
this may cause overheating. Unplug the
heater for 30 minutes and allow it to cool
down. Replug and operate. Monitor the
heater for signs of overheating. If the
problem persists discontinue use of the
heater and contact customer service.
Heater does not blow warm air. The heater is in a cool down cycle.
Normal operation will continue to run for
several minutes before shutting down.
Times will vary based on temperatures.
During this time cool air will blow.
There is no power and the logs do not
glow. There is no power to the unit.
Check that the unit is plugged into a
standard 120V outlet. Press the Power
button several times and make sure
power is set to the “ON” position.
The logs glow, but there is no effect. The ame effect turned off. Press the Flame button several times.
The heater does not blow warm air. Thermostat setting is preventing the
heater from turning on.
Adjust the temperature settings to ensure
that the thermostat is set higher than the
current room temperature.
The heater is producing a burning smell.
Dust has accumulated on the heating coil
during the manufacturing process. It will
quickly dissipate and should not occur
again.
Ensure room in which heater is situated is
well ventilated.
Check & ensure there are no combustible
materials within 0.9 meters (3 feet)
surrounding the heater.
Remove any combustible items from the
heater.
Ensure a minimum clearance of 2.42
inches (6.15 cm) from both sides and rear
of heater to adjacent walls.
Reposition the heater so there is enough
space around the heater to the adjacent
walls.

Questions, problems, missing parts? Before returning to the store,
call Home Decorators Collection Customer Service
8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday
1-800-986-3460
HOMEDEPOT.COM/HOMEDECORATORS
Retain this manual for future use.
Printed in China
Manufactured by: GHP Group, Inc. • 6440 W. Howard St. • Niles, IL 60714-3302

GRACIAS
Apreciamos la confianza depositada en Home Decorators Collection por medio de la compra de esta chimenea eléctrica con repisa. Nos
esforzamos para crear continuamente productos de calidad diseñados para mejorar su hogar. Visítenos en internet para ver nuestra línea
completa de productos disponibles para el mejoramiento de su hogar. ¡Gracias por elegir Home Decorators Collection!
GUÍA DE USO Y CUIDADO
COLECCIÓN BARDEN: CHIMENEA ELÉCTRICA CON REPISA
¿Preguntas, problemas o partes faltantes? Antes de regresar a la tienda,
llame al servicio de atención al cliente de Home Decorators Collection
8 a.m. - 7 p.m., Hora del Este de lunes a viernes, 9 a.m. - 6 p.m., Hora del Este de Sábado
1-800-986-3460
HOMEDEPOT.COM/HOMEDECORATORS
INSTRUCCIONES IMPORTANTES
POR FAVOR, LEA ESTE MANUAL ANTES DE LA INSTALACIÓN Y USO DEL DISPOSITIVO
¡ADVERTENCIA!
SI LA INFORMACIÓN EN ESTE MANUAL NO SE SIGUE CON EXACTITUD, PUEDE RESULTAR UN CHOQUE ELÉCTRICO O INCENDIO
OCASIONANDO DAÑOS A LA PROPIEDAD, LESIONES PERSONALES O LA MUERTE.
INSTALADOR: Deje este manual con el dispositivo.
CONSUMIDOR: Conserve este manual para uso futuro.
Modelo # 269-218-463-Y
Artículo # 1005228146

16
Tabla de contenido
Garantía
Tabla de contenido .................................16
Garantía ..........................................16
Pre-ensamblaje ....................................17
Planicación del ensamblaje ........................17
Herramientas necesarias ...........................17
Piezas incluidas ..................................17
Contenido del paquete .............................18
Ensamblaje .......................................19
Cuidado y limpieza .................................25
Capacidad de carga de la repisa .......................25
Piezas de servicio ..................................26
Resolución de fallas ................................27
GARANTÍA DE 1 AÑO
LO QUE ESTÁ CUBIERTO
El fabricante garantiza que su nueva chimenea eléctrica está libre de defectos de fabricación y materiales por un periodo de un año a partir
de la fecha de compra, sujeto a las siguientes condiciones y limitaciones.
Esta chimenea eléctrica debe ser instalada y operada en todo momento de acuerdo con las instrucciones proporcionadas con el producto.
Cualquier alteración, abuso intencionado, accidente o mal uso del producto anulará esta garantía. Esta garantía es intransferible y es hecha
al propietario original, siempre que la compra fue hecha mediante un proveedor autorizado del fabricante. Esta garantía está limitada a la
reparación o reemplazo de pieza(s) que se encuentren defectuosas en materiales o mano de obra, siempre que tal(es) pieza(s) hayan estado
sujetas a condiciones normales de uso y servicio, luego de que dicho defecto sea conrmado por la inspección de fabricante. El fabricante
puede, a su discreción, liberar de todas las obligaciones, con respecto a esta garantía mediante el reembolso del precio al por mayor de la(s)
pieza(s) defectuosa(s).
LO QUE NO ESTÁ CUBIERTO
Cualquier instalación, trabajo, construcción, transporte u otros costos/gastos que surjan de pieza(s) defectuosa(s), reparación, reemplazo u
otra cosa similar, no será cubierta por esta garantía y tampoco el fabricante asumirá responsabilidad por lo mismo. Además, el fabricante no
será responsable de ningún daño incidental, indirecto o consecuente, excepto como lo establezca la ley.
Todas las otras garantías, expresas o implícitas, con respecto al producto, sus componentes y accesorios, o cualquier obligación/
responsabilidad civil sobre la pieza del fabricante, por la presente se excluyen expresamente. El fabricante tampoco asume, ni autoriza a
ninguna tercera parte a asumir, en su nombre, cualquier otra responsabilidad civil con respecto a la venta de este producto. Las garantías
como están descritas dentro de este documento, no aplican a accesorios que no son del fabricante usadas junto con la instalación de este
producto.
Esta garantía no cubre la(s) bombilla(s) incluidas con la chimenea.
Esta garantía no tiene validez si: la chimenea ha sido operada en atmósferas contaminadas con cloro, úor u otro químico dañino; la
chimenea está sujeta a periodos prolongados de humedad o condensación; la chimenea es alterada, maltratada intencionalmente, dañada
por accidente o usada incorrectamente en cualquier manera.
Si se necesita servicio de garantía, póngase en contacto con el Equipo de Servicio al Cliente llamando 1-800-986-3460, 8 a.m. - 7 p.m., Hora
del Este de lunes a viernes, 9 a.m. - 6 p.m., Hora del Este de Sábado o visite www.homedepot.com/homedecorators.
Asegúrese de tener su garantía, su recibo de venta y el número de modelo/serie de su producto.
NO INTENTE HACER TRABAJO DE SERVICIO USTED MISMO.
Este producto puede exponerlo a usted a agentes químicos incluyendo ftalato de diisononilo (DINP), reconocido por el estado
de California como causante de cáncer, así como ftalatos de diisodecilo (DIDP), reconocidos por el estado de California como
causantes de defectos congénitos y otros daños al sistema reproductor.
Para obtener más información, visite www.p65Warnings.ca.gov
ADVERTENCIA

17
HOMEDEPOT.COM/HOMEDECORATORS
Favor contactar al 1-800-986-3460 para mayor asistencia.
Pre-ensamblaje
NOTA: Las herramientas son no mostradas en su tamaño real.
PIEZAS INCLUÍDAS
HERRAMIENTAS REQUERIDAS
PLANIFICACION DEL ENSAMBLAJE
Antes de iniciar el ensamblaje localice las instrucciones y las piezas. Compare todas las piezas con la lista de piezas incluidas y contenido
del embalaje. Asegúrese de tener todas las piezas y de que pueda identicarlas. Siempre es bueno contar con ayuda. Ensámblelo con
asistencia de una persona adulta si es posible. Algunas piezas son pesadas y necesitará ayuda. El tiempo de ensamblaje se estima entre
30-60 minutos.
Antes de ensamblar, utilice tijeras para sacar las piezas del embalaje. No utilice una navaja o cuchillo exacto, ya que podría cortar las piezas
dentro de la caja y dañar el acabado. Busque la bolsa roja de herramientas situada en el interior del empaque. No deseche ninguna pieza.
Utilice un destornillador apropiado para insertar y ajustar todos los tornillos.
Gafas de seguridad Desarmador Phillips
Pieza Descripción Cantidad
AA Tornillo 22
BB Espiga de madera 12
CC Panel posterior del tornillo 30
DD Tiradores 2
EE Clavijas de repisa 8
FF Tornillo 4
GG Bisagra 4
HH Tornillo de bisagra 8
AA BB CC EE FF GG HHDD

18
Pre-ensamblaje (continuación)
CONTENIDO DEL PAQUETE
Pieza Descripción Cantidad
A Panel superior 1
B Panel de base 1
C Repisa multimedia 1
D Panel lateral izquierdo 1
E Panel lateral derecho 1
F Panel lateral superior izquierdo 1
G Panel lateral superior derecho 1
H Panel interior izquierdo 1
Pieza Descripción Cantidad
J Panel interior derecho 1
K Soporte superior de caja de fuego 1
L Soporte de caja de fuego 2
M Repisa ajustable 2
N Panel trasero superior 1
P Panel trasero 2
Q Puerta del mueble 2
N
P
P
A
F
G
C
E
D
M
M
J
H
L
L
K
Q
B
Q

19
HOMEDEPOT.COM/HOMEDECORATORS
Favor contactar al 1-800-986-3460 para mayor asistencia.
Ensamblaje
AA
AA
K
L
L
B
B
1 Fijación de la base
□Localice el panel base (B) y colóquelo sobre una
supercie suave para proteger el acabado.
□Localice el panel base (B). Fije el panel de inserción (K)
al panel de base (B) insertando dos pernos (AA) a través
de los conectores y girándolos en el sentido de las agujas
del reloj. No pele los tornillos (AA) apretando demasiado.
2
Adjuntar soporte de inserción
□Localice los dos soportes de inserción (L) y fíjelos
al panel base (B) insertando dos pernos (AA) a
través de los conectores. No pele los tornillos (AA)
apretando demasiado.

20
Ensamblaje (continuación)
3
Fijación del panel interior
izquierdo y derecho
□Localice el panel interior izquierdo y derecho (H y J) y
fíjelo al panel base (B) insertando cuatro clavijas (BB) en
los oricios provistos.
□Inserte dos pernos (AA) a través de los conectores y
gírelos en sentido horario. No pele los tornillos (AA)
apretando demasiado.
4
Fijación del panel lateral
izquierdo y derecho
□Localice el estante de medios (C) y je el panel lateral
izquierdo y derecho (D y E) al estante de medios
(C) insertando cuatro pernos (AA) a través de los
conectores y girándolos en el sentido de las agujas del
reloj. No pele los tornillos (AA) apretando demasiado.
AA
B
J
BB
H
D
C
E
AA