Home Leisure Direct ArcadePro Barrel 516 User manual

1 of 12
Setting Up
Set the ArcadePro Barrel up by plugging the included power cable into a wall socket, and then
into the power plug on the side of the machine.
Powering Up
To power the machine on, flip the Power Switch to on. The machine will power on and load up
the main games menu.

2 of 12
Controls
Pause Game
Search (In Menu)
Player 1 Start (In Game)
Up - scroll through games
Down - scroll through games
Player 2 Start
Select/Confirm
Note: It is not possible to add any additional games to the system.
You can navigate through the menu using the joystick, and select your game using the Player 1
A button.
High Scores will be saved between games.

3 of 12
Starting and Exiting Games
After a game is selected, you can begin either a one-player game with the Player 1 Start
button, or a two-player game with the Player 2 Start button. Each player has their own
controls on their respective sides of the machine. Coins will be added automatically upon
pressing either start button.
A game can be paused or quit at any time by pressing the Pause Button, where you will be
given the option to resume your current game, quit back to the main menu or save or load a
state.
By default, if a game is left idle for a period of 3 minutes and a game has no “credits” and no
buttons or inputs are registered, the system will return to the main menu. This can be changed
in the settings menu if you wish.
Saving and Loading a Game
Whilst your high scores will be saved, the system also allows you to save your progress at any
point, and return to that point at a later time. This is achieved by saving a “State”.
About “States”
On this ArcadePro system, a “State” can be described as a specific point or moment when in
the game. When you load a state, you will return in the game to the exact moment where you
saved it.
States can be saved, or loaded at any point of the game.
On this system, there can only be one state per game. Each new state you save will overwrite
the last.

4 of 12
How to use
To access the save and load system, pause the game you’re currently playing using the Pause
button, then save the state by highlighting the “Save State” option with the joystick, then
pressing Ato confirm, and save the state.
To load the last state you saved, pause the game using the Pause button, then press the Player
1 D button to load the most recent save state. Resume the game by hitting the Player 1 A
button.

5 of 12
Search Function
The machine includes a very useful search function that can help you to find your favourite
games in seconds, without having to scroll through the entire games list.
To find this option, press the Player 1 Start Button on the main menu to choose between your
recently played games and the search function. In this menu, you can use the Player 1 joystick
and Player 1 A button to type what you want to search for with the on-screen keyboard,
confirming with the “OK” button on the on-screen keyboard.
You can use the Player 1 joystick and Player 1 A button to select and play any of the search
results.
When you exit the game, you will return to your original search results, where you can play
another result, or return to the main list.

6 of 12
Accessing The Inside Of Your Machine
For certain settings and features (such as volume and the settings menu), you will need to
access the inside of the machine.
You can open the access door using the included key.

7 of 12
Changing the Volume
The amplifier controls can be altered or switched off entirely with the small amplifier located
inside the unit, accessed via the front door with the included key. The large dial in the middle
will alter the volume. The smaller dials will change bass and treble.
The amplifier can be switched on or off with the push-switch just to the left of the dials.
Accessing The Options Menu
To access the options on your unit, press the small Settings button just inside the access door
on the right hand side.
The options list contains a comprehensive list of settings that can customise your ArcadePro
machine.

8 of 12
System Settings Menu
Navigate the menu with the joystick, and make selections with the Player 1 A Button.
We do not recommend modifying any options not covered by the following lists. Doing so can
result in reduced functionality of your system for general users.
•IO Test – Test all inputs on the system to check for functionality.
•Custom Button – Change how the buttons are mapped.
•System Config – Change various defaults that determine how the system operates.
•Game Setting – Modify game settings such as difficulty and add favourites to your
games list.
•Boot Demo Movies – Change whether the system will play its opening “Boot Up” video.
•Save Setting – Save every settings change you have made. The system will then reset
to the main games menu.
•Factory Setting – Restore all of the system’s factory default settings.

9 of 12
Game Setting
The Game Setting menu allows you to make changes to game difficulty as well as modifying
your games list and setting favourites.
Controls
Up - Move up
Down - Move down
Game
Difficulty/
Make
Selection
Edit Games
List
Edit
Favourites
List
Return to
Menu

10 of 12
Difficulty And Lives
Selecting this option will allow you to change each game’s difficulty. Scroll using the joystick
to the game you want to change, and then use the A and B buttons to modify settings as
required. You can refer to the on-screen guide for details.
Edit Games List
0001
Game Will Be
Displayed
Game Will Be
Hidden
This option allows you to hide any games you don’t want or need to see in your main games list.
Games that are hidden will show a red “No Entry” symbol next to its entry.
You can toggle individual games by using the A button. You can hide the entire list using the C
button. You can show the whole list using the B button.

11 of 12
System Config Menu
•Auto Exit – Enable or disable automatic exiting from a game after 3 minutes.

12 of 12
Troubleshooting
No Sound
If there is no sound on your ArcadePro system, check to see if the amplifier on the system is
switched on, turned up and that the cabling going into the amplifier system is securely
connected.
If problem persists after these checks, contact us.
Changing Components and configuring joysticks
Buttons and joysticks on the system can be swapped over quickly. Visit our buying advice page
on our website and check out our troubleshooting video guide
( https://www.homeleisuredirect.com/arcade_machines/buying-advice/ ) to see how to
change buttons, joysticks and configure these for use.
Have Fun!