Home Leisure Direct ARCADEPRO Cyberspace 9270 User manual

Setting Up
The ArcadePro Cyberspace can either be used either with the included legs or without them
depending on your intended use. To attach the legs, use the included screws and a Phillips
screwdriver to attach each leg to the base. The legs should each be facing outward to their
respective corner.
Cyberspace Arcade Machine Underside View)
1 of 15

Powering Up and Set Up
To switch the unit on, plug the power cord into a wall socket, then the connecting lead into the
Power Plug on the underside of the machine. Power the machine on by flipping the power
switch to on. The machine will power on, and load up the games menu.
Controlling the Lighting
The lighting on the machine can be powered on or off depending on your preference. The
lighting can be switched on or off using the Lights Switch on the underside of the machine.
The lighting can also be controlled once switched on) using the included IR remote control.
This controller allows you to change the lighting’s colour, brightness and even flashing patterns.
Note that this does not affect the illuminated buttons.
2 of 15

Accessing the Inside of your Machine
There are some components on the inside of the machine you will periodically need access to
such as the amplifier and settings switch). These can be easily accessed using the rear panel.
Unlock the access panel using the included key, and open it to access the internal components.
3 of 15

Changing the Volume
The amplifier controls can be altered or switched off entirely with the small amplifier located
inside the unit, accessed via the rear door with the included key. The large dial in the middle
will alter the volume. The smaller dials will change bass and treble.
The amplifier can be switched on or off with the push-switch just to the left of the dials.
4 of 15

Machine Controls
5 of 15

Basic Menu Controls
Pandora Games 3D is an easy to navigate menu system that will give you easy access to every
game on the system. The system allows you to tailor the games list to your liking, and
begin/end games at your leisure. Below gives a basic outline as to what each control button
will do.
Up - Scroll up
Make
Selection
Pause/Exit
Game/Save
/Load
Down - Scroll down
Left - Page back
Right - Page forward
Player 1
Start
and Insert
Coin
Player 2
Start and
Insert Coin
Your ArcadePro machine will boot up to the main games list screen when switched on.
To switch to the games list, scroll to the top of the list where the currently seen list will be
highlighted. You can then move left or right using the Player 1 joystick to switch between the
lists.
Use the Player 1 joystick to navigate through the lists, then select your game with the Player 1
A button.
6 of 15

Search Function
Pandora Games 3D includes a very useful search function that can help you to find your
favourite games in seconds, without having to scroll through the entire games list.
To find this option, highlight the games lists at the top, then navigate right to select the
search function. In this menu, you can use the Player 1 joystick and Player 1 A button to type
what you want to search for with the on-screen keyboard. You can delete letters with the
Player 1 B button.
As you enter in letters, the list on the left will begin to fill with games that match your search
term. You can use the Player 1 joystick and Player 1 A button to select and play any of the
search results.
When you exit the game, you will return to your original search results, where you can play
another result, search for another game or navigate back to the main games lists.
7 of 15

In-Game Controls
When a game is loaded, a 1 player game can be started with the Player 1 Start button. A 2
player game can be started with the Player 2 Start Button. Pressing either of these buttons
also acts as inserting a virtual coin, should the game you're playing require them.
A game can be paused or quit at any time by pressing either Pause Button, where you will be
given the option to resume your current game, or quit back to the Pandora Games 3D menu.
Every time a game is loaded from the menu, it is loaded ‘from fresh’, meaning that high scores
are not saved between games, unless saved manually by the player using the saving and
loading system.
Saving and Loading a Game
Note: Every time a game is loaded, it is loaded ‘from fresh’, meaning that high scores are not
saved between games unless saved manually by the player using the saving and loading
system.
The system allows you to save your progress at any point, and then return to that point at a
later time. This is achieved by saving a “State”.
About “States”
On this ArcadePro system, a “State” can be described as a specific point or moment when in
the game. When you load a state, you will return in the game to the exact moment where you
saved it.
States can be saved or loaded at any point of the game.
On this system, there can only be one state per game. Each new state you save will overwrite
the last.
8 of 15

How to use
To access the save and load system, pause the game you’re currently playing using the Pause
button, then save the state by pressing the Player 1 C button. You can resume the game by
hitting the Player 1 A button.
To load the last state you saved, pause the game using the Pause button, then press the Player
1 D button to load the most recent save state. Resume the game by hitting the Player 1 A
button.
9 of 15

System Options Menu
This machine features an options screen that allows you to customise your unit.
Accessing The Options Menu
To access the options on your unit, open the access panel on the back using the machine’s
included key and locate the main PCB unit inside.
Press the small Settings Switch as illustrated.
The options list contains a comprehensive list of settings that can customise your ArcadePro
machine.
10 of 15

Pandora Games 3D Options
Pandora Games 3D features an options screen that allows you to customise your unit.
Pandora Games 3D System Settings Menu
You can return to the games list by pressing the Player 1 D button.
11 of 15

We do not recommend modifying any options not covered by the following list. Doing so can
result in reduced functionality of your system for general users.
Key Settings - Use this to test input functionality on all joysticks and buttons, or to
re-map the controls.
Auto exit – Set the amount of time a game spends idle before returning to the main
menu.
Image Optimisation – Select one of a few preset visual filters including adding scan
lines)
Language - Use to change the system’s default display language.
Enter Game Settings - Customise the games list. Use to hide or display what appears in
the games list. Also alter certain games’ difficulty.
Burst Setting – Enable auto-fire input by holding a button.
Fa tory Data Reset – Restore all the system’s factory default settings.
12 of 15

Customising Your Games List
The games list can be changed using the “Enter Game Settings” option in the Pandora Games
3D Settings Menu.
This list will give you complete control over the games on your system from difficulty to
creating a custom favourites list. Below outlines what each option allows. Refer to the on-
screen instructions for how to navigate these options.
We do not recommend modifying any options not covered by the following list. Doing so can
result in reduced functionality of your system for general users.
Edit Diffi ulty and Life – Alter certain aspects of a game’s difficulty, including number
of lives and other settings varies depending on game).
Edit Favourite List – Bookmark your favourite games.
Edit Game List – Hide or show selected games on your games list.
Delete Game – Select a game to permanently delete from the system.
Delete All Games – Permanently delete every game from your system.
13 of 15

Edit Game List
Game Will Be
Displayed
Game Will Be
Hidden
Hiding certain games on the 2D games list can make it easier to find your favourite games on
the system by displaying only the games you wish to see.
If a game in the list is prefixed with its number, then it will be displayed in the 2D games list
upon exiting.
If a game is prefixed with a red X, then it will be hidden in the 2D Games List upon exiting.
14 of 15

Troubleshooting:
Wrong Language on Startup
There’s a slim chance that upon arrival, your machine will not be in English. This is an
occasional leftover from checks during production and is easily rectified.
1. Access the Options Menu See page 10)
2. Scroll down to Language 7th option from the top)
3. Press A until the language changes to English
4. Exit as normal
No Sound
If there is no sound on your ArcadePro system, check to see if the amplifier on the system is
switched on, turned up and that the cabling going into the amplifier system is securely
connected.
If problem persists after these checks, contact us.
Have Fun!
15 of 15