Home Leisure Direct Arcadepro Mercury User manual

1 of 6
ArcadePro Mercury Arcade Console User Guide
Console Rear
Powering Up and Set Up
Note: The USB ports seen on the rear of the console are not used.
To switch the unit on, plug the power cable into a wall socket, then the connecting lead into the
Power Plug on the rear of the machine. Next, plug a HDMI cable into the HDMI Output on the back
of the console, and to a HDMI compatible TV. An alternative is to do the same with a VGA cable to
connect the console to a VGA compatible monitor.
Power the machine on by pressing in the Standby Power Button. The machine will power on, and
load up the games menu.

2 of 6
Machine Controls
Pandora’s Treasure Menu System
Pandora’s Treasure is an easy to navigate menu system that will give you easy access to every
game on the system. The system allows you to tailor the games list to your liking, and
begin/end games at your leisure. Below gives a basic outline as to what each control button
will do.
Up - Scroll up
Down - Scroll down
Left - Page back
Right - Page forward
Make
Selection
Pause/Exit
Game
Player 1 Start
Player 2
Start
Insert ‘Coin’
Insert Coin
Player 1
Exit
Player 2

3 of 6
Pandora’s Treasure splits games between 2D games list and a 3D games list. Your ArcadePro
machine will boot up to this screen when switched on.
To switch to the games list, scroll to the top of the list where the games list in question will
be highlighted. You can then move left or right using the Player 1 joystick to switch between
the two lists.
Use the Player 1 joystick to navigate through the lists, then select your game with the Player 1
A button.
A 1 player game can be started with the Player 1 Start button. A 2 player game can be started
with the Player 2 Start Button.
If a game requires coins to play, do so by pressing the ‘Insert Coin’ button.
A game can be paused or quit at any time by pressing the Exit Button, where you will be given
the option to resume your current game, or quit back to the Pandora’s Treasure menu.
Changing the Volume
The system’s sound is output to your screen/sound system if connected via HDMI. Use your TV
controls to adjust the volume.

4 of 6
Pandora’s Treasure Menu
To access the menu on the ArcadePro Mercury System, press the ‘Set’switch on the rear of the
console.
We do not recommend modifying any options not covered by the following list. Doing so can
result in reduced functionality of your system.
•USB JoyStick Mode –Not Used.
•IO Test - Use this to test input functionality on all joysticks and buttons
•Game List Setting - Customise the games list. Use to hide or display what appears in the
games list.
•Background Music - Use to switch the system’s background music on or off.
•Wallpaper - Use to change the background wallpaper displayed on your ArcadePro
system.
•Language - Use to change the system’s default display language.
•Discard and Exit - Select this option to return to the games list, discarding any changes
you may have made.
•Save and Exit - Select this option to return to the games list, saving any changes you
have made to options.

5 of 6
Customising Your Games List
Note: It is not possible to add any additional games to the system.
The games list can be changed using the Game List Setting option in the Pandora’s Treasure
Settings Menu.
Basic Controls and Key
Up - Scroll up
Down - Scroll down
Make
Selection
Hide All
Games
Show All
Games
Back
Game Will Be
Displayed
Game Will Be
Hidden
Hiding certain games on the 2D games list can make it easier to find your favourite games on the
system by displaying only the games you wish to see.
If a game in the list is prefixed with its number, then it will be displayed in the 2D games list
upon exiting.
If a game is prefixed with a red X, then it will be hidden in the 2D Games List upon exiting.

6 of 6
Troubleshooting:
Wrong Language on Startup
There’s a slim chance that upon arrival, your machine will not be in English. This is an occasional
leftover from checks during production and is easily rectified.
•Access the Options Menu (See page 4)
•Scroll down to the option marked with a flag
•Press A until the language changes to English
•Save and Exit as normal
You can also view our video on how to change the language on the buying advice page on our
website at https://www.homeleisuredirect.com/arcade_machines/buying-advice/
No Sound
If there is no sound on your ArcadePro system, ensure the volume dial on the rear of the system
is turned up, or turn up the volume on your Television.
If problem persists after these checks, contact us.
Changing Components and configuring joysticks
Buttons and joysticks on the system can be swapped over quickly. Visit our buying advice page
on our website and check out our troubleshooting video guide
( https://www.homeleisuredirect.com/arcade_machines/buying-advice/ ) to see how to change
buttons, joysticks and configure these for use.
Have Fun!