Home Leisure Direct ArcadePro User manual

1of 5
ArcadePro Saturn Upright Arcade Machine User Guide
Setting Up
Powering Up and Set Up
To switch the unit on, plug the power cable into a wall socket, then the connecting lead into
the Power Plug on the rear of the machine. Power the machine on by flipping the power switch
to on. The machine will power on, and load up the games menu.
Controlling the Lighting
The under lighting on the machine can be powered on or off depending on your preference. The
lighting can be switched on or off using the External Lighting Switch on the back of the
machine. Note that this does not control the illuminated buttons.

2of 5
To Play a Game
To play a game, you must first ‘insert coins’into the machine. You can do this by pressing
Insert Coin button. Each press of the button adds one credit.
You can now navigate through the menu using the joystick, and select your game using the A
Button.
Starting and Exiting Games
After a game is selected, you can begin either a one-player game with the Player 1 Start
button, or a two-player game with the Player 2 Start button.
To exit back to the main games menu, press and hold the Player 1 Start Button and the Insert
Coin Button.

3of 5
Changing The Volume And Accessing Game Settings
These features can only be adjusted from the inside the machine. You can access the inside of
the machine via a door panel at the front of the machine. Unlock the panel with the included
key.
Changing the Volume
The amplifier controls can be found on a shelf on the inside of the machine as seen above. The
large central dial changes the volume, and the smaller dials will alter the bass and treble
respectively. The amplifier can be switched off completely using the push-button the left of
the dials.

4of 5
Changing Settings
You can change various machine and game settings using the settings menu. You can access
the settings menu by pressing the Arcade Settings Button just inside the cabinet.
The settings menu contains many options. Use the A button to make selections and the D
button to go back. The key options are outlined below:
IO TEST> : Check the functionality of each button and the joysticks
Credit Setting: Change how many credits are added with each
button press.
EXIT Game Mode: Change the buttons required to exit games back
to the games menu
AUTO EXIT: Change when a game will automatically end and return to
the main menu.
Game Setting: Change individual aspects of each game to make it
easier or harder.
Save Setting & Reboot: Exit from the settings menu, saving any
changes. The system will reboot to the games menu.
Factory Setting and Reboot: Reset any changes that have been
made to factory default. The system will reboot to the games menu.
Changing Game Settings
Upon entering the Games Setting menu, you are presented with a list of all 1299 games. Scroll
through the list with the joystick, then use the A button to select whatever game you wish to
make changes to.
The right hand side of the screen will show the options
that can be changed. Use the A, B or C buttons to
change the values, and then use the D button to save
and exit.
When done, you can simply replace the rear panel and lock up again.

5of 5
Moving The Machine
The ArcadePro Saturn is designed to be moved around easily with the added castor wheels. If
you wish to make the machine immobile, you can do so easily using the retractable feet at the
bottom of the machine. You will find each foot next to each castor wheel.
To adjust the feet, turn each foot by hand, or usea 22mm spanner to turn the nut to the
desired level.
Have Fun!