Home Leisure Direct Arcadepro Neptune User manual

1 of 5
Setting Up
Powering Up
To switch the unit on, plug the power cable into a wall socket, then the connecting lead into the
Power Plug on the side of the machine. Power the machine on by flipping the power switch to on.
The machine will power on, and load up the games menu.
Controlling the Lighting
The under lighting on the machine can be powered on or off depending on your preference. The
lighting can be switched on or off using the External Lighting Switch on the side of the machine.
Note that this does not control the illuminated buttons.

2 of 5
Neptune Controls (Side)
Up - Scroll up
Down - down
Left - Page back
Right - Page forward
Select
Game/Player 1
Start
Insert Coin
Player 2 Start
Change
Games List
To Play a Game
Note: It is not possible to add any additional games to the system.
To play a game, you must first ‘insert coins’into the machine. You can do this by pressing Insert
Coin button.
You can now navigate through the menu using the joystick, and select your game using the
Player 1 Start button.
Each game boots ‘from fresh’every time, meaning that High Scores will not be saved upon exit.

3 of 5
Switching Games Lists
The ArcadePro Neptune separates games depending on whether they are meant to be played in
portrait (vertically) or in landscape (horizontally). Upon start up, the Neptune will load the
landscape games list.
If you wish to switch another games list, simply hit the Player 1 B button on either set of
controls. The new games list will load in, allowing you to make a selection with the relevant set
of controls. You are free to switch between games lists whenever you wish when in the games
menu.
Starting and Exiting Games
After a game is selected, you can begin either a one-player game with the Player 1 Start button,
or a two-player game with the Player 2 Start button. If playing games in portrait mode, then
each player has their own controls on their respective sides of the machine.
Some games may require inserting additional ‘coins’ to play. Do so with the Insert Coin button.
To exit any game, hold the player 1 start button and the insert coin button together until the
exit menu is displayed. This menu will allow you to either quit back to the games list, or to
resume playing whatever game you are currently playing.

4 of 5
Changing The Volume
You can access the amplifier controls inside the machine via a door in the other side of the
machine. Unlock the door with the included key.
The amplifier controls can be just inside of the machine as seen above. The large central dial
changes the volume, and the smaller dials will alter the bass and treble respectively. The
amplifier can be switched off completely using the push-button the left of the dials.
When done, you can simply close the door and lock up again.
Adjusting the Feet
The ArcadePro Neptune’s feet can each be
individually adjusted.
To adjust the feet, simply twist the feet in
either direction to move up or down. If needed,
you can use a 22 mm spanner to turn the nut to
the desired level.

5 of 5
Troubleshooting
No Sound
If there is no sound on your ArcadePro system, check to see if the amplifier on the system is
switched on, turned up and that the cabling going into the amplifier system is securely
connected.
If problem persists after these checks, contact us.
Changing Components and configuring joysticks
Buttons and joysticks on the system can be swapped over quickly. Visit our buying advice page
on our website and check out our troubleshooting video guide
( https://www.homeleisuredirect.com/arcade_machines/buying-advice/ ) to see how to change
buttons, joysticks and configure these for use.
Have Fun!