Home Leisure Direct Arcadepro Saturn 2097 User manual

1 of 16
Setting Up
Powering Up and Set Up
To switch the unit on, plug the power cable into a wall socket, then the connecting lead into the
Power Plug on the rear of the machine. Power the machine on by flipping the power switch to on.
The machine will power on, and load up the games menu.
Controlling the Lighting
The under lighting on the machine can be powered on or off depending on your preference. The
lighting can be switched on or off using the External Lighting Switch on the back of the
machine. Note that this does not control the illuminated buttons.

2 of 16
Accessing the Inside of your Machine
There are some components on the inside of the machine you will periodically need access to
(such as the amplifier and settings switch). These can both be accessed using the front access
door, opened using the included key. The internals can also be accessed through the rear panel.
Changing the Volume
The amplifier controls can be altered or switched off entirely with the small amplifier located
inside the unit, accessed via the front door with the included key. The large dial in the middle
will alter the volume. The smaller dials can change bass and treble.
The amplifier can be switched on or off with the push-switch just to the left of the dials.

3 of 16
Moving The Machine
The ArcadePro Saturn is designed to be moved around easily with the added castor wheels. If you
wish to make the machine immobile, you can do so easily using the retractable feet at the
bottom of the machine. You will find each foot next to each castor wheel.
To adjust the feet, turn each foot by hand, or use a 22mm spanner to turn the nut to the desired
level.

4 of 16
Machine Controls
Pandora Games 3D Menu System
Pandora Games 3D is an easy to navigate menu system that will give you easy access to every
game on the system. The system allows you to tailor the games list to your liking, and
begin/end games at your leisure. Below gives a basic outline as to what each control button
will do.
Up - Scroll up
Down - Scroll down
Left - Page back
Right - Page forward
Make
Selection
Pause/Exit
Game/Save/
Load
Player 1 Start
Player 2
Start
Insert ‘Coin’
Your ArcadePro machine will boot up to the main games list screen when switched on.
Insert Coin
Player 1
Exit
Player 2

5 of 16
To switch to the games list, scroll to the top of the list where the currently seen list will be
highlighted. You can then move left or right using the Player 1 joystick to switch between the
lists.
Use the Player 1 joystick to navigate through the lists, then select your game with the Player 1
A button.
A 1 player game can be started with the Player 1 Start button. A 2 player game can be started
with the Player 2 Start Button.
If a game requires coins to play, insert a virtual coin with the ‘Insert Coin’ button.
A game can be paused or quit at any time by pressing the Pause Button, where you will be
given the option to resume your current game, or quit back to the Pandora Games 3D menu.
Every time a game is loaded from the menu, it is loaded ‘from fresh’, meaning that high scores
are not saved between games, unless saved manually by the player using the saving and
loading system.
Saving and Loading a Game
The system allows you to save your progress at any point, and then return to that point at a
later time. This is achieved by saving a “State”.

6 of 16
About “States”
On this ArcadePro system, a “State” can be described as a specific point or moment when in
the game. When you load a state, you will return in the game to the exact moment where you
saved it.
States can be saved, or loaded at any point of the game.
On this system, there can only be one state per game. Each new state you save will overwrite
the last.
How to use
To access the save and load system, pause the game you’re currently playing using the Pause
button, then save the state by pressing the Player 1 C button. You can resume the game by
hitting the Player 1 A button.
To load the last state you saved, pause the game using the Pause button, then press the Player
1 D button to load the most recent save state. Resume the game by hitting the Player 1 A
button.

7 of 16
Search Function
Pandora Games 3D includes a very useful search function that can help you to find your
favourite games in seconds, without having to scroll through the entire games list.
To find this option, highlight the games lists at the top, then navigate right to select the
search function. In this menu, you can use the Player 1 joystick and Player 1 A button to type
what you want to search for with the on-screen keyboard. You can delete letters with the
Player 1 B button.
As you enter in letters, the list on the left will begin to fill with games that match your search
term. You can use the Player 1 joystick and Player 1 A button to select and play any of the
search results.
When you exit the game, you will return to your original search results, where you can play
another result, search for another game or navigate back to the main games lists.

8 of 16
Changing the Volume
The amplifier controls can be altered or switched off entirely with the small controls on the
front of the unit. The large dial in the middle will alter the volume. The smaller dials can
change bass and treble.
The amplifier can be switched on or off with the push-switch just to the left of the dials.
Pandora Games 3D Options
Pandora Games 3D features an options screen that allows you to customise your unit.
Accessing The Options Menu
To access the options on your unit, open the access door on the back using the machine’s
included key and locate the main unit inside. Press the small settings switch as illustrated.
The options list contains a comprehensive list of settings that can customise your ArcadePro
machine. Below outlines the options that you can modify.

9 of 16
Pandora Games 3D System Settings Menu
You can return to the games list by pressing the Player 1 D button.
We do not recommend modifying any options not covered by the following list. Doing so can
result in reduced functionality of your system for general users.
•Key Settings - Use this to test input functionality on all joysticks and buttons, or to
re-map the controls.
•Auto exit – Set the amount of time a game spends idle before returning to the main
menu.
•Image Optimisation – Select one of a few preset visual filters (including adding scan
lines)
•Language - Use to change the system’s default display language.
•Enter Game Settings - Customise the games list. Use to hide or display what appears in
the games list. Also alter certain games’ difficulty.
•Enter Game Market – Access and download from the online marketplace to add more
games to your system. (see page 11 for details)
•Burst Setting – Enable auto-fire input by holding a button.
•WiFi – Set up the system’s WiFi functionality.
•Factory Data Reset – Restore all the system’s factory default settings.

10 of 16
Customising Your Games List
The games list can be changed using the “Enter Game Settings” option in the Pandora Games
3D Settings Menu.
This list will give you complete control over the games on your system from difficulty to
creating a custom favourites list. Below outlines what each option allows. Refer to the on-
screen instructions for how to navigate these options.
We do not recommend modifying any options not covered by the following list. Doing so can
result in reduced functionality of your system for general users.
•Edit Difficulty and Life – Alter certain aspects of a game’s difficulty, including number
of lives and other settings (varies depending on game).
•Edit Favourite List – Bookmark your favourite games.
•Edit Game List – Hide or show selected games on your games list.
•Delete Game – Select a game to permanently delete from the system.
•Delete All Games – Permanently delete every game from your system.

11 of 16
Edit Game List
Game Will Be
Displayed
Game Will Be
Hidden
Hiding certain games on the 2D games list can make it easier to find your favourite games on
the system by displaying only the games you wish to see.
If a game in the list is prefixed with its number, then it will be displayed in the 2D games list
upon exiting.
If a game is prefixed with a red X, then it will be hidden in the 2D Games List upon exiting.
Downloading Additional Games
This machine has the ability to download and add additional games via a specially created
online marketplace where all manner of different games can be downloaded to the system. In
total, there are over 12,000 games that can be chosen.
Before You Begin – Setting up your Internet Connection
Before you can access the marketplace, the system’s Internet connection needs to be set up.
This can be done in the settings menu (see page 8 for details on how to access).
Navigate down to the Wi-Fi option in the main settings menu, then select it with the A button.

12 of 16
If the system’s Wi-Fi is not switched on, you can do so by selecting the switch at the top of
the menu.
The system will display a list of all available WiFi networks that can be chosen. Navigate down
to your network of choice, then select using the A button. Depending on your WiFi security
settings, you may be asked to input a WEP Key or Password. Use the on-screen keyboard to
input this.
Once connected, you can return to the settings menu using the D button.
Accessing the Marketplace
The game’s marketplace can be accessed from the settings menu using the “Market” option.
The Marketplace home screen will be displayed.
Marketplace Controls
Up - Move up
Down - Move down
Left - Move Left
Right - Move Right
Make
Selection
Cancel/Go
Back

13 of 16
Finding Games
The marketplace allows you to look for games in 3 ways (seen at the top of the screen).
Highlight this top menu, and then move the joystick left or right to switch between the
options.
Chart - See games according to how popular they are.
Category - Find a game based on their genre or console of origin.
Search – Search across the entire marketplace with search criteria that you specify.
Downloading Games
When looking for games using the methods as mentioned above, games will be displayed in a
large grid that can be navigated using the joystick.
You can select a game with the A button.

14 of 16
To download the game, select the “Install” option. Once downloaded, the game can be played
from the main menu like any other games on the system.
Note: Any games installed on the system from the Marketplace will be found at the end of your
current games list.
To exit from the marketplace, press the D button to return to the settings menu, and then exit
from there as normal.

15 of 16
Storage
The SD Card on this system can be found on the main Pandora’s Box unit as shown above
(inside the console cabinet).
This ArcadePro system uses an internal SD card to store games. The system includes a 64GB
SD card pre-installed (with about 8GB left for installing additional games). This SD card can be
removed and upgraded for larger capacity SD cards (up to 128GB).
In addition, games can be deleted from the system in order to make more space for additional
downloaded games (see page 10 for details)

16 of 16
Troubleshooting:
Wrong Language on Startup
There’s a slim chance that upon arrival, your machine will not be in English. This is an occasional
leftover from checks during production and is easily rectified.
•Access the Options Menu (See page 8)
•Scroll down to the option marked with a flag
•Press A until the language changes to English
•Save and Exit as normal
You can also view our video on how to change the language on the buying advice page on our
website at https://www.homeleisuredirect.com/arcade_machines/buying-advice/
No Sound
If there is no sound on your ArcadePro system, check to see if the amplifier on the system is
switched on, turned up and that the cabling going into the amplifier system is securely
connected.
If problem persists after these checks, contact us.
Have Fun!