Home Styles 20 051 0031 34 User manual

Hardware List
Part List
Tool(s) required for assembly: Level
20 051 003134
Dining Table
IMPORTANT
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
Hex Wrench
1 pc.
Small Hex Wrench
1 pc.
B.
Side Frame
2 pcs.
M6x60
Head Cap Bolt
6 pcs. (+1 extra)
M8x65
Head Cap Bolt (large)
8 pcs. (+1 extra)
Spring Washer
6 pcs. (+1 extra)
Spring Washer (large)
8 pcs. (+1 extra)
Flat Washer
8 pcs. (+1 extra)
Washer
6 pcs. (+1 extra)
Care Instructions
The concrete top is made of natural stone materials with naturally occurring
fissures and cavities. A sealer has been applied to the concrete to reduce the
absorption of liquids. Even with sealer applied, liquids can absorb into the
concrete causing permanent stains. Never allow liquids to remain on the top.
C.
Stretcher
2 pcs.
A.
Top
1 pc.
D.
Stretcher
1 pc.

Assembly Instructions 2/3
Figure 1
STEP 1
Attach Stretchers (C) and (D) to Side Frame (B) with Washers, Spring Washers
and Head Cap Bolts, tightening bolts only halfway.
(See Figure 1)
Attach Side Frame (B) to unit with Washers, Spring Washers and Head Cap Bolts,
tightening bolts only halfway.
Head Cap Bolt
Spring Washer
Washer
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
The unit must be level to work properly. Use the included adjustable levelers to level.
Keep Hex Wrench as the bolts may need to be tightened in the future.
B
B
C
C
D

Figure 2
A
Head Cap Bolt (large)
Spring Washer (large)
Flat Washer
Figure 3
STEP 3
Turn unit over to its’ upright position.
Level unit by adjusting the adjustable levelers on bottom of unit.
(See Figure 3)
Assembly Instructions 3/3
STEP 2
Place Top (A) upside down on a soft cloth.
Attach unit to Top (A) with Flat Washers, Spring Washers (large) and Head Cap Bolts (large),
tightening bolts only halfway. (See Figure 2)
Tighten all Head Cap Bolts used in Step 1 and 2.

NEVER
use glass cleaners on
finished furniture. Ammonia
chemically attacks the finish.
allow liquids to remain on furniture.
Absorption causes parts to warp
and split and finishes to delaminate.
NEVER
CARE INSTRUCTIONS
Do not use rubber
based placemats.
PREVENT
DISCOLORING
Do not use commercial
waxes and polishes.
PREVENT
YELLOWING
Do not place hot
objects on surface.
PREVENT
FINISH DAMAGE
Do not write
directly on surface.
PREVENT
MARKING
Do not use power tools
above 8 volts to assemble.
PREVENT
CRACKING
Do not place
in direct sunlight.
PREVENT
FADING
with a soft cloth moistened
in lukewarm soap and water.
Buff with a dry clean cloth.
CLEAN
Home Styles will provide replacements free of charge for missing or damaged hardware or parts within 30 days of
purchase. Digital images of the defective parts may be required. If the product was not purchased from an authorized
retail affiliate, Home Styles is under no obligation to provide replacement parts. Parts are not available for fully assembled
items nor are parts available for sale. Replacements for missing or damaged hardware or parts may be requested at: