Home Styles 88 5527 100 User manual

Part List
I.
Base
1 pc.
R.
Drawer
2 pcs.
F.
Front Rail
1 pc.
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the wood parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
A.
Top
1 pc.
Casual Attire For Today's Home
88 5527 100
Credenza
Homestead
Compact TV
Tools required for assembly : Phillips screwdriver
Hardware List
K.
Back Panel
1 pc.
P.
Shelf
4 pcs.
(Knock-Down Construction, please refer
to the last page of these instructions for
steps to assemble drawers)
B.
Side Panel
.1 pc
C.
Side Panel
1 pc.
D.
Middle Panel
.1 pc
E.
Middle Panel
.1 pc
G.
Leg
4 pcs.
H.
Plinth
1 pc.
J.
Back Panel
1 pc.
L.
Back Panel
2 pcs.
M.
Fixed Shelf
1 pc.
N.
Door
1 pc.
O.
Door
1 pc.
Q
Shelf
1 pc.
Cam Lock
25 pcs.(+2 extra)
Cam Lock Screw
25 pcs.(+2 extra)
Adjustable Pin
20 pcs.(+1 extra)
Pull Handle
4 pcs.
Machine Screw
4 pcs.
Wood Screw
for Back Panel
12 pcs.(+1 extra)
Wood Screw
for Drawer
26 pcs.(+1 extra)
Wood Screw
for Drawer hinge
12 pcs.(+1 extra)
Wood Screw
for Magnet
4 pcs.(+1 extra)
Magnet
2 pcs.

STEP 1
Assembly Instructions 2/5
A
Cam Lock Screw
Wood Screw
Magnet
Attach 2X Magnets to
Top (A) by using
Wood Screws
in the pre-drilled holes
(see Figure 1).
Insert Cam Lock Screws into the
pre-drilled holes of Top (A), Side Panel (B) and (C),
Middle Panels (D), (E), Base (I) and Plinth (H).
Figure 1
D
E
B
C
H
I
STEP 2
Attach Fixed Shelf (M) and Front Rail (F)
to Middle Panel (E) with Cam Locks.
Attach Middle Panel (D) to unit with
Cam Locks. (see Figure 2)
Slide Back Panel (K) into
position, then attach Base (I)
to unit with Cam Locks.
M
EF
D
I
Figure 2
Cam Lock Screw
Cam Lock
K

Assembly Instructions 3/5
STEP 3
Attach Side Panels (B) and (C)
to unit with Cam Locks.
Attach Plinth (H) to unit with Cam Locks.
Attach 4X legs (G) to unit and tighten.
B
C
G
G
G
G
H
STEP 4
Figure 3
Figure 4
Slide Back Panels (L), (J) and (K)
into position.
Place Top (A) onto the unit with Cam Locks.
Attach Doors (N) and (O) by sliding the door lift hinges
into the side panels’ lift hinges. (See figure 3)
Assemble Pull Handles to Doors with Machine Screws. (See figure 4)
A
N
O
J
LL

Insert Adjustable Pins into side panels and
middle panels at the desired level. (See figure 5)
Place Shelves (P), (Q) and Drawer (R) into position.
STEP 6
STEP 7
Figure 6
Insert 12X Wood Screws
from the back of the unit,
tighten up all the Wood Screws.
(See figure 6)
Note: Please make sure unit is level before tightening these screws.
Figure 5 Q
P
P
P
P
R
R
Adjustable Pin
Assembly Instructions 4/5

Assembly Instructions 5/5
Figure 1
Figure 2
R2
R2
R5
R3
R4
R5
R1
Drawer (R)
Part List
R1.
Front Part
2 pcs.
R5.
Base Part
2 pcs.
R2.
Back Part
2 pcs.
R3.
Side Part
2 pcs.
R4.
Side Part
2 pcs.
Figure 3
Attach R2 to R5, using a
and wood screws , tighten halfway.
(see Figure 1)
Phillips screwdriver
(4X)long
Assemble Pull Handle with
machine screw. (see Figure 3)
Attach R3 and R4 to the unit
with wood screws (10X),
tighten halfway.
Attach R1 to R5 with
wood screws (6X).
long
short
(see Figure 2)
STEP 1
STEP 2
STEP 3
Tighten all screws used in
drawer assembly.