Home Styles 20 05602 0030 User manual

Home Styles Customer Service: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
IMPORTANT
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
Hardware List
Part List
Tool(s) required for assembly: Level
Wing Nut
4 pcs. (+1 extra)
M6
Flat Washer (small)
4 pcs. (+1 extra)
20 05602 0030
Bistro Table
Care Instructions
The tile top contains natural stone materials with naturally occurring fissures and
cavities. A sealer has been applied to reduce the absorption of liquids. Even with
sealer applied, liquids can still absorb into the surface causing permanent stains
and can damage the top by cracking the tiles if the absorbed liquid freezes.
• Never allow liquids to remain on the top.
• Apply a stone sealer to the top annually.
• Store inside in freezing weather.
Hex Wrench
1 pc.
M8x15
Head Cap Bolt
8 pcs. (+1 extra)
A.
Top
1 pc.
B.
Frame
1 pc.
C.
Frame
2 pcs.
Small Hex Wrench
1 pc.
M8
Flat Washer
8 pcs. (+1 extra)

Assembly Instructions 2/3
IMPORTANT
Use a soft cloth between these parts and the floor.
The unit must be level to work properly. Use the included adjustable levelers to level.
Keep Hex Wrench as the bolts may need to be tightened in the future.
STEP 1
Attach Frames (C) to Frame (B) with Flat Washers and
Head Cap Bolts, tightening bolts only halfway.
(See Figure 1)
Figure 1
B
C
C
Head Cap Bolt
Flat Washer
Figure 2
A
STEP 2
Place Top (A) upside down on a soft cloth.
Attach unit to Top (A) with Flat Washers (small)
and Wing Nuts, tightening Wing Nuts only halfway.
(See Figure 2)
Tighten all Head Cap Bolts used in Step 1.
Tighten all Wing Nuts.
Wing Nut
Flat Washer (small)

Assembly Instructions 3/3
Figure 3
STEP 3
Turn table over to its upright position.
Level table by adjusting the adjustable levelers on bottom of table.
(See Figure 3)

NEVER
use glass cleaners on
finished furniture. Ammonia
chemically attacks the finish.
allow liquids to remain on furniture.
Absorption causes parts to warp
and split and finishes to delaminate.
NEVER
CARE INSTRUCTIONS
Do not use rubber
based placemats.
PREVENT
DISCOLORING
Do not use commercial
waxes and polishes.
PREVENT
YELLOWING
Do not place hot
objects on surface.
PREVENT
FINISH DAMAGE
Do not write
directly on surface.
PREVENT
MARKING
Do not use power tools
above 8 volts to assemble.
PREVENT
CRACKING
Do not place
in direct sunlight.
PREVENT
FADING
with a soft cloth moistened
in lukewarm soap and water.
Buff with a dry clean cloth.
CLEAN
Home Styles will provide replacements free of charge for missing or damaged hardware or parts within 30 days of
purchase. Digital images of the defective parts may be required. If the product was not purchased from an authorized
retail affiliate, Home Styles is under no obligation to provide replacement parts. Parts are not available for fully assembled
items nor are parts available for sale. Replacements for missing or damaged hardware or parts may be requested at:
www.homestyles-furniture.com/customer-service/replacement-parts
Home Styles Customer Service: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319