Home Styles 5022 942 User manual

Hardware List
Part List
Tool(s) required for assembly: Phillips screwdriver, Level
5022 942-
Kitchen Island
IMPORTANT
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
Carton 5022 941 is also needed for assembly.-
Hex Wrench
1 pc.
Small Hex Wrench
1 pc.
Cam Lock Screw
16 pcs. (+1 extra)
Cam Lock
16 pcs. (+2 extra)
C.
Side Panel
1 pc.
Handle
2 pcs.
Knob
2 pcs.
M4x25
Machine Screw
6 pcs.
Adjustable Pin
20 pcs. (+1 extra)
M4x16
Wood Screw
for Hinge
27 pcs. (+2 extra)
M3.5x16
Wood Screw (short)
6 pcs. (+1 extra)
B.
Side Panel
.1 pc
H1.
Front Rail
1 pc.
H2.
Front Rail
1 pc.
D.
Side Panel
1 pc.
E.
Side Panel
1 pc.
F.
Side Panel
1 pc.
G.
Side Panel
1 pc.
I.
Back Rail
2 pcs.
N.
Back Support
1 pc.
O.
Back Support
1 pc.
J.
Back Upright
1 pc.
K.
Back Panel
2 pcs.
L.
Shelf
4 pcs.
M.
Shelf
1 pc.
T.
Door
1 pc.
S.
Plinth
2 pcs.
U.
Door
1 pc.
Q.
Plinth
2 pcs.
R.
Leg Support
1 pc.
P.
Base
1 pc.
V.
Drawer
1 pc.
Refer to later page(s) of these
instructions for drawer assembly.
M3.5x25
Wood Screw (long)
8 pcs. (+1 extra)
M6x30
Head Cap Bolt
26 pcs. (+1 extra)
Home Styles Customer Service: www.homestylesfurniture.com,
[email protected], 888-680-7460, 877-831-0319

Head Cap Bolt
P
S
Q
Q
R
S
Assembly Instructions 2/6
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
The unit must be level to work properly. Use the included adjustable levelers to level.
Keep Hex Wrench as the bolts may need to be tightened in the future.
Figure 1
STEP 1
Insert Cam Lock Screws into pre-drilled holes
in Side Panels (D), (E), (F) and (G), then tighten.
(See Figure 1)
Figure 2
E
D
FG
Cam Lock Screw
Cam Lock Screw
STEP 2
Attach Plinths (Q) and (S) to
Base (P) with Head Cap Bolts.
(See Figure 2)
Attach Leg Support (R) to
unit with Head Cap Bolts.

I
I
JK
K
G
E
Cam Lock
Head Cap Bolt
B
C
Head Cap Bolt
Assembly Instructions 3/6
STEP 3
Attach Side Panel (E) to
unit with Head Cap Bolts.
Attach Back Rail (I) to
unit with Cam Lock.
(See Figure 3)
Attach Back Upright (J)
to unit.
Slide Back Panels (K) into position.
Attach Back Rail (I) to unit with Cam Lock.
Attach Side Panel (G) to unit with Cam Locks and Head Cap Bolts.
STEP 4
Attach Side Panels (B) and (C) to unit with Head Cap Bolts.
Figure 3

H1
H2
F
D
Head Cap Bolt
Cam Lock
Assembly Instructions 4/6
O
N
STEP 6
Turn unit to its upright position.
Attach Back Supports (N) and (O)
to unit with Wood Screws for Hinge.
STEP 5
Attach Side Panel (D) to unit
with Head Cap Bolts.
Attach Front Rails (H1) and
(H2) to unit with Cam Locks.
Attach Side Panel (F)
to unit with Head Cap Bolts
and Cam Locks.
Wood Screw for Hinge

Part List
Assembly Instructions 5/6
V1.
Drawer Front
1 pc.
V2.
Drawer Back
1 pc.
V3.
Drawer Side
1 pc.
V4.
Drawer Side
1 pc.
V5.
Drawer Bottom
1 pc.
STEP 9
Attach Handles with Machine Screws.
Machine Screw
Handle
STEP 8
Slide Drawer Bottom (V5) into groove.
Attach Drawer Bottom (V5) to
unit with Wood Screws (short).
V5
Drawer (V)
Bottom
STEP 7
Attach Drawer Front (V1) and Drawer
Back (V2) to Drawer Side (V3)
with Wood Screws (long).
Attach Drawer Side (V4) to unit
with Wood Screws (long).
V1
V3
V2 V4
Wood Screw (long)
Roller at back
Wood Screw (short)

Machine Screw
Cam Lock
Adjustable Pin
Knob
V
M
L
L
L
L
T
U
Adjustable Pin
Adjustable Pin
Assembly Instructions 6/6
STEP 11
Insert Adjustable Pins into
side panels at desired level.
Place Shelves (L) and (M)
into position.
Attach Doors (T) and (U) to
unit by sliding door hinges
into side panel hinges.
(See Figure 4)
Attach Knobs to Doors (T)
and (U) with Machine Screws.
(See Figure 5)
Attach top unit to unit with Cam Locks.
Slide Drawer (V) into position.
Level unit by adjusting the adjustable
levelers on bottom of unit.
(See Figure 6)
Figure 4 Figure 5
Figure 6
STEP 10
Place Tops (A1) and (A2)
upside down on a soft cloth.
Attach Top (A2) to Top (A1)
with Wood Screws for Hinge.
Insert Cam Lock Screws into
pre-drilled holes of top unit,
then tighten.
Wood Screws for Hinge Cam Lock Screw
A2
A1

NEVER
use glass cleaners on
finished furniture. Ammonia
chemically attacks the finish.
allow liquids to remain on furniture.
Absorption causes parts to warp
and split and finishes to delaminate.
NEVER
CARE INSTRUCTIONS
Do not use rubber
based placemats.
PREVENT
DISCOLORING
Do not use commercial
waxes and polishes.
PREVENT
YELLOWING
Do not place hot
objects on surface.
PREVENT
FINISH DAMAGE
Do not write
directly on surface.
PREVENT
MARKING
Do not use power tools
above 8 volts to assemble.
PREVENT
CRACKING
Do not place
in direct sunlight.
PREVENT
FADING
with a soft cloth moistened
in lukewarm soap and water.
Buff with a dry clean cloth.
CLEAN
Home Styles will provide replacements free of charge for missing or damaged hardware or parts within 30 days of
purchase. Digital images of the defective parts may be required. If the product was not purchased from an authorized
retail affiliate, Home Styles is under no obligation to provide replacement parts. Parts are not available for fully assembled
items nor are parts available for sale. Replacements for missing or damaged hardware or parts may be requested at:
www.homestylesfurniture.com/customer-service/replacement-parts
Home Styles Customer Service: www.homestylesfurniture.com,
[email protected], 888-680-7460, 877-831-0319