Home Styles 88 5120 89C User manual

Thank you for purchasing our quality products.
Please carefully check the quantity of the parts
and hardware. Please also read this assembly
instructions until you understand clearly how to
put the parts together, then start assembling
step by step.
PART LIST
HARDWARE LIST
Casual Attire For Today's Home
E.
Front Stretcher
1 pc.
88 5120 89C
Bar Stool Set with
Decorative Copper Accents
(Set includes two Bar stools and one High Table)
C.
Leg
1 pc.
D.
Leg
1 pc.
F.
Side Stretcher
1 pc.
G.
Side Stretcher
1 pc.
B.
Back Frame
1 pc.
Head Cap Bolt
(long)
4 pcs.(+1 extra)
Wood Screw
6 pcs.(+1 extra)
Head Cap Bolt
(middle)
4 pcs. (+1 extra)
Spring
Washer
11 pcs.(+1 extra)
Flat
Washer
11 pcs.(+1 extra)
A.
Seat
1 pc.
Hex Wrench
1 pc.
Head Cap Bolt
(short)
3 pcs. (+1 extra)
Tools Required For Assembly : Phillips screwdriver
Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319
[email protected]

Thank you for purchasing our quality products.
Please carefully check the quantity of the parts
and hardware. Please also read this assembly
instructions until you understand clearly how to
put the parts together, then start assembling
step by step.
PART LIST
HARDWARE LIST
Casual Attire For Today's Home
E.
Front Stretcher
1 pc.
88 5123 89C
Bar Stool Set with
Decorative Stainless Steel Accents
(Set includes two Bar stools and one High Table)
C.
Leg
1 pc.
D.
Leg
1 pc.
F.
Side Stretcher
1 pc.
G.
Side Stretcher
1 pc.
B.
Back Frame
1 pc.
A.
Seat
1 pc.
Hex Wrench
1 pc.
Tools Required For Assembly : Phillips screwdriver
Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319
[email protected]
Head Cap Bolt
(long)
4 pcs.(+1 extra)
Wood Screw
6 pcs.(+1 extra)
Head Cap Bolt
(middle)
4 pcs. (+1 extra)
Spring
Washer
11 pcs.(+1 extra)
Flat
Washer
11 pcs.(+1 extra)
Head Cap Bolt
(short)
3 pcs. (+1 extra)

Assembly Instructions
STEP 2
Attach the Leg (C) to Seat (A) with Head Cap Bolts
(middle), Spring Washers and Flat Washers.
Attach the Front Stretcher (E) to the Leg (C).
Attach the Leg (D) to the Assembled Unit with
Head Cap Bolts (middle), Spring Washers and
Flat Washers, then tighten Head Cap Bolts half way.
Insert the Wood Screws from the Front Stretcher (E)
to the Legs (C) and (D) as shown, tighten them up.
Wood Screws
(Stretcher Parts)
Assembly
STEP 1
Attach the Back Rail of Back Frame (B)
to the Assembled Unit with Head Cap Bolts
(middle),Spring Washers and Flat Washers.
Tighten Head Cap Bolt half way.
For the corner, use Head Cap Bolts
(long), Spring Washers and
Flat Washers. Tighten Head Cap Bolt half way.
Attach the Side Stretcher (F) to the
Assembled Unit and Front Leg (C) with Wood Screws.
Attach the Side Stretcher (G) to the
Assembled Unit and Front Leg (D)
with Wood Screws.
Then tighten up all the Head Cap Bolt
and Wood Screws as to hold all
the Chair Part firmly.
IMPORTANT
* Do not tighten up all the screws until each part is properly assembled.
* You should keep Hex Wrench in the safe place as you may need to tighten up the Head Cap Bolts in the future.
A
E
D
C
B
G
F
Flat Washer
Spring Washer
Head Cap Bolt
(middle)
Flat
Washer
Spring
Washer
Head Cap Bolt
Assembly
(Back Frame Part)
Head Cap Bolt
Assembly
(corner)
Head Cap Bolt
(Legs Part)
Assembly
C
D
Wood Screw
Wood Screw
Head Cap Bolt
Spring Washer
Flat Washer
Head Cap Bolt
Spring Washer
Flat Washer