Home Styles 88 5542 49 User manual

Part List
Tool(s) required for assembly: Phillips screwdriver, Level, Drill (8 volts or less), 3/8” Drill Bit
88 5542 49
IMPORTANT
Home Styles Customer Service: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
Hall Tree
E.
Middle Panel
1 pc.
U.
Door
1 pc.
A.
Top
1 pc.
B.
Shelf
1 pc.
G.
Seat
1 pc.
H.
Bottom
1 pc.
J.
Front Rail
1 pc.
O.
Back Rail
1 pc.
P.
Back Panel
1 pc.
T.
Side Panel
1 pc.
D.
Side Panel
1 pc.
F.
Leg
4 pcs.
K.
Back Rail
2 pcs.
L.
Back Rail
1 pc.
N.
Back Rail
1 pc.
M.
Back Panel
1 pc.
Q.
Back Panel
2 pcs.
C.
Side Panel
1 pc.
S.
Side Panel
1 pc.
R.
Back Post
1 pc.
V.
Door
1 pc.
I.
Front Rail
1 pc.
Cam Lock Screw
30 pcs.(+1 extra)
Hex Wrench
1 pc.
M4x40
Wood Screw
for Side Panel
4 pcs. (+1 extra)
Small
Hex Wrench
1 pc.
Hook
4 pcs.
M4x25
Machine Screw
2 pcs.
M3.5x16
Wood Screw
for Back Panel
24 pcs. (+1 extra)
M3x16
Wood Screw
for Hinge
8 pcs. (+1 extra)
Pull Handle
2 pcs.
Cam Lock
30 pcs.(+ extra)4
M4x16
Wood Screw
for Hook
8 pcs. (+1 extra)
Hardware List

Cam Lock Screw
Assembly Instructions 2/7
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
The unit must be level to work properly. Use the included adjustable levelers to level.
STEP 1
Insert Cam Lock Screws into the
pre-drilled holes of Top (A), Seat (G),
Bottom (H) and Side Panels (C), (D), (S), (T). (See Figure 1)
STEP 2
Attach Legs (F) to Bottom (H).
(See Figure 2)
A
G
H
T
C
D
S
Figure 1
Figure 2
F
F
F
F
H

Assembly Instructions 3/7
STEP 4
Attach unit to bottom unit from Step 2 with Cam Locks.
Cam Lock
STEP 3
Attach Front Rail (I) and Back Rails (K) to Side Panel (C)
with Cam Locks. (See Figure 3)
Slide Back Panel (M) into place.
Attach Side Panel (D) to unit with Cam Locks.
Cam Lock
K
M
I
KD
C
Figure 3

Assembly Instructions 4/7
STEP 5
Attach Back Rails (L), (N) to
Side Panel (T) with Cam Locks and
slide Back Panel (P) into place.
Slide Back Panels (Q) and Back
Post (R) into Back Rail (N).
Attach Back Rail (O) to the unit
with Cam Lock.
STEP 6
Attach Shelf (B) and Front Rail (J)
to unit with Cam Locks.
Slide Middle Panel (E) into place.
Attach Side Panel (S) to unit with Cam Locks.
STEP 7
Attach Top (A) to unit
with Cam Locks.
Attach Seat (G) to unit with
Wood Screws for Side Panel.
(See Figure 4)
A
G
Cam Lock
Wood Screw for Side Panel
Cam Lock
Cam Lock
L
NP
Q
Q
R
O
TJ
E
B
S
Figure 4

Assembly Instructions 5/7
STEP 8
Attach the top unit to the base unit
with Cam Locks.
STEP 9
To level the unit, adjust the adjustable levelers
on the bottom of legs. (See Figure 5)
Insert 24X Wood Screws from the back
of the unit and tighten.
Note: Unit must be level before
tightening these screws.
Cam Lock
Wood Screw for
Back Panel
Figure 5

Assembly Instructions 6/7
STEP 10
Attach Hooks to the unit with Wood Screw for Hooks. (See Figure 6)
Attach Doors (U) and (V) to base unit with Wood Screws for Hinges. (See Figure 7)
Attach Pull Handles to Doors (U) and (V) with Machine Screws. (See Figure 8)
Wood Screw for Hook
Wood Screw for Hinge
Hook
U
V
Figure 6 Figure 7 Figure 8

Assembly Instructions 7/7
Hardware List
STEP 11
Place unit at desired location.
Drill a 3/8” hole in wall in-line with
the pre-drilled hole at top of unit.
Move unit.
Insert Anchor into the wall hole
and attach Bracket with Wall Screw.
Attach Bracket at pre-drilled hole
at top of unit with Wood Screw.
Move unit back into place.
Slide Tip-over Restraint through
Bracket on wall and Bracket on unit.
(See Figure 9)
Put tie end of Tip-over Restraint into lock
end of Tip-over Restraint and pull until tight.
Anchor
1 pc. (+1 extra)
Bracket
2 pcs. (+1 extra)
Tip-over Restraint
1 pc. (+1 extra)
M3.5x40
Wall Screw
1 pc. (+1 extra)
M3.5x16
Wood Screw
1 pc. (+1 extra)
Figure 9
Wood Screw
Wall Screw
Bracket
on wall
Anchor in wall
3/8” wall hole
Pre-drilled hole
at top of unit
Tie end
Lock end
Bracket at
top of unit
Tip-over
Restraint
Drill 3/8” hole in wall
Top of unit
IMPORTANT
To help reduce the risk of the unit tipping over, the Tip-over Restraint must be installed following these instructions exactly.

NEVER
use glass cleaners on
finished furniture. Ammonia
chemically attacks the finish.
allow liquids to remain on furniture.
Absorption causes parts to warp
and split and finishes to delaminate.
NEVER
CARE INSTRUCTIONS
Do not use rubber
based placemats.
PREVENT
DISCOLORING
Do not use commercial
waxes and polishes.
PREVENT
YELLOWING
Do not place hot
objects on surface.
PREVENT
FINISH DAMAGE
Do not write
directly on surface.
PREVENT
MARKING
Do not use power tools
above 8 volts to assemble.
PREVENT
CRACKING
Do not place
in direct sunlight.
PREVENT
FADING
with a soft cloth moistened
in lukewarm soap and water.
Buff with a dry clean cloth.
CLEAN
Home Styles will provide replacements free of charge for missing or damaged hardware or parts within 30 days of
purchase. Digital images of the defective parts may be required. If the product was not purchased from an authorized
retail affiliate, Home Styles is under no obligation to provide replacement parts. Parts are not available for fully assembled
items nor are parts available for sale. Replacements for missing or damaged hardware or parts may be requested at:
www.homestyles-furniture.com/customer-service/replacement-parts
Home Styles Customer Service: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319