Home Styles Lafayette 88 5537 101 User manual

Part List
I.
Base
1 pc.
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the wood parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
A.
Top
1 pc.
Casual Attire For Today's Home
88 5537 101
Entertainment Credenza
The Lafayette
Tools required for assembly : Phillips screwdriver
Hardware List
For assembly see instructions in carton 88 5537 102
Cam Lock
26 pcs.(+1 extra)
Cam Lock Screw
26 pcs.(+1 extra)
Adjustable Pin
20 pcs.(+1 extra)
Pull Handle
4 pcs.
Machine Screw
4 pcs.
Nail
4 pcs.(+1 extra)
H.
Plinth
1 pc.
T.
Front Rail
1 pc.
J.
Back Panel
1 pc.
Wood Screw
for Back Panel
12 pcs.(+1 extra)
M.
Shelf
4 pcs.
Head Cap Bolt
8 pcs. (+1extra)
Hex Wrench
1 pc.
Steel Plate
for Pull Handle
Attachment
1 pc.
K.
Back Panel
2 pcs.
Magnet
4 pcs.
Wood Screw
for Magnet
8 pcs.(+1 extra)
L.
Shelf
1 pc.

Part List (in this carton)
Also need the following from carton 88 5537 101 :
B.
Side Panel
.1 pc
E.
Middle Panel
.1 pc
C.
Side Panel
1 pc.
N.
Door
1 pc.
O.
Door
1 pc.
P.
Door
1 pc.
Q.
Door
1 pc.
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the wood parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed. Casual Attire For Today's Home
Hardware List in carton 88 5537 101
Hex Wrench
Head Cap Bolt
Cam Lock Screw
Cam Lock
Magnet
Wood Screw for Magnet
Wood Screw for Back Panel
Adjustable Pin
Pull Handle
Machine Screw
Nail
Steel Plate For Pull Handle Attachment
Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319
[email protected]
F.
Fixed Shelf
1 pc.
D.
Middle Panel
.1 pc
Part List in carton 88 5537 101
Top (A)
Plinth (H)
Base (I)
Back Panel (J)
Back Panel (K)
Shelf (L)
Shelf (M)
Front Rail (T)
1 pc.
1 pc.
1 pc.
1 pc.
2 pcs.
4 pcs.
1 pc.
1 pc.
1 pc.
9 pcs.
27 pcs.
27 pcs.
4 pcs.
9 pcs.
13 pcs.
21 pcs.
4 pcs.
4 pcs.
5 pcs.
1 pc.
S.
Leg
1 pc.
R.
Leg
4 pcs.
88 5537 102
Entertainment Credenza
The Lafayette
Tools required for assembly : Phillips screwdriver
G.
Back Panel
1 pc.

D
E
Cam Lock Screw
Cam Lock
Magnet
G
F
STEP 3
Attach Fixed Shelf (F) to Middle Panel (D) with Cam Locks,
to the unit with Cam Locks.
Attach 2X Magnets to Fixed Shelf (F)
by using Wood Screws in the pre-drilled holes.
then slide Back Panel (G) into position.
Attach Middle Panel (E)
Figure 2
STEP 1
STEP 2
Assembly Instructions 2/4
A
T
Cam Lock Screw
Cam Lock
Insert Cam Lock Screws
into the pre-drilled holes
of
Base (I).
Side Panel (B) and (C),
Middle Panel (D) and (E),
Plinth (H) and
Magnet
B
C
D
E
H
I
Insert Cam Lock Screws into
the pre-drilled holes of Top (A)
Attach 2X Magnets to
Front Rail (T) by using
Wood Screws (see Figure 1).
.
Attach Front Rail (T) to Top (A) with Cam Locks
(see Figure 2).
IMPORTANT
Do not tighten up all the screws until each part is properly assembled.
You should keep Hex Wrench in a safe place as you
may need to tighten up the
Head Cap Bolts in the future.
Figure 1

STEP 4
Assembly Instructions 3/4
Head Cap Bolt
Head Cap Bolt
Attach Base (I) to the unit with Cam Locks.
Attach Side Panel (B) and (C), Plinth (H)
to the unit with Cam Locks.
Attach Legs (R) to the unit
with Head Cap Bolts (see Figure 3).
Tighten up Leg (S) in the pre-drilled hole of unit as shown.
I
B
R
R
R
R
HC
A
Adjustable Pin
Cam Lock
STEP 5
Slide Back Panels
(J) and (K) into place.
Place Top (A) onto
the unit, using
Cam Locks.
Insert Adjustable Pins into
side panels and middle panels at the desired level (see Figure 4).
Place Shelves (L) and (M) into position.
L
J
K
M
M
M
M
K
Figure 4
Figure 3
S

O
P
Q
Assemble Pull Handles to Doors with Machine Screws.
Use the Steel Plate to firmly push the nail through the hole in the Pull Handle and into
the pre-drilled hole in the door (see Figure 5).
Attach Doors (N), (O), (P) and (Q) by sliding the door lift hinges into the side panels lift hinges
(see Figure 6).
STEP 6
Assembly Instructions 4/4
N
Figure 6
Figure 5
STEP 7
Figure 7
Insert 12X Wood Screws from the back of the unit,
tighten up all the Wood Screws (see Figure 7).
Note: Please make sure unit is level before tightening these screws.
Nail
Steel Plate