Home Styles 20 05170 0016 User manual

Hardware List
Part List
Home Styles Customer Service: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
Tool(s) required for assembly: Phillips screwdriver, Level
20 05170 0016
Desk
IMPORTANT
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
Hex Wrench
1 pc.
Small Hex Wrench
1 pc.
Cam Lock Screw
8 pcs. (+1 extra)
Cam Lock
8 pcs. (+2 extra)
Knob
6 pcs.
M4x22
Machine Screw (short)
2 pcs.
A.
Top
1 pc.
B.
Top
1 pc.
C.
Side Panel
1 pc.
D.
Side Panel
1 pc.
E.
Middle Panel
1 pc.
F.
Middle Panel
1 pc.
G.
Side Panel
1 pc.
H.
Side Panel
1 pc.
I.
Middle Panel
1 pc.
J.
Middle Panel
1 pc.
K.
Shelf
2 pcs.
L.
Frame
1 pc.
N.
Back Panel
1 pc.
O.
Leg
4 pcs.
R.
Keyboard
1 pc.
S.
Keyboard Front
1 pc.
P.
Drawer
2 pcs.
Q.
Drawer
2 pcs.
M6x32
Head Cap Bolt
13 pcs. (+1 extra)
M3.5x32
Wood Screw
2 pcs. (+1 extra)
Dowel
2 pcs. (+1 extra)
Small Dowel
4 pcs. (+1 extra)
M.
Back Panel
1 pc.
M3x14
Wood Screw
for Hinge
6 pcs. (+1 extra)
Flat Washer
13 pcs. (+1 extra)
Spring Washer
13 pcs. (+1 extra)
Refer to later page(s) of these
instructions for drawer assembly.
M4x32
Machine Screw (long)
4 pcs.

Assembly Instructions 2/7
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Make sure unit is level before tightening these screws.
Do not tighten all the bolts until each part is properly assembled.
The unit must be level to work properly. Use the included adjustable levelers to level.
Keep Wrench as the bolts may need to be tightened in future.
Figure 1
STEP 1
Insert Cam Lock Screws into pre-drilled holes of
Side Panels (C) and (D), then tighten. (See Figure 1)
C
Cam Lock Screw
D
STEP 2
Attach Middle Panels (E) and (F) to Back Panel (N).
Attach Frame (L) to unit.
E
F
L
N

O
O
O
O
STEP 5
Insert Legs (O) into pre-drilled
holes of unit, then tighten.
Assembly Instructions 3/7
D
Cam Lock
Head Cap Bolt
C
STEP 3
Attach Side Panels (C) and (D)
to unit with Cam Locks,
Flat Washers, Spring Washers
and Head Cap Bolts.
(See Figures 2 and 3)
Figure 2 Figure 3
Spring Washer
Flat Washer
STEP 4
Place Top (B) upside down on a soft cloth.
Turn unit upside down, then attach
unit to Top (B) with Flat Washers,
Spring Washers and Head Cap Bolts.
Note: Arrow label indicates front of Top (B).
B
Arrow label at front
Head Cap Bolt
Spring Washer
Flat Washer

Figure 4
M
I
J
Wood Screw
STEP 6
Attach Middle Panels (I) and (J)
to Back Panel (M) with Wood Screws.
(See Figure 4)
STEP 7
Attach Shelves (K) to unit.
Attach Side Panels (G) and (H) to unit.
G
H
K
K
A
STEP 8
Attach Top (A) to unit.
Assembly Instructions 4/7

Cam Lock Screw
Small Dowel
Dowel
STEP 9
Turn unit from Step 5 over
to its’ upright position.
Insert Cam Lock Screws into
pre-drilled holes of unit,
then tighten.
Insert Dowels and Small Dowels
into pre-drilled holes of unit.
Cam Lock
STEP 10
Attach unit from Step 8
to unit with Cam Locks.
Assembly Instructions 5/7

Part List
Assembly Instructions 6/7
Q1.
Drawer Front
2 pcs.
Q2.
Drawer Back
2 pcs.
Q3.
Drawer Side
2 pcs.
Q4.
Drawer Side
2 pcs.
Q5.
Drawer Bottom
2 pcs.
Drawer (Q)
Knob
STEP 11
Attach Drawer Sides (Q3) and (Q4) to
Drawer Back (Q2), then flip the locks.
(See Figures 5 and 6)
Q4
Q2
Q3
Roller at back
Lock
Q5
Q1
Lock
STEP 13
Attach Knob with Machine Screw (short).
STEP 12
Slide Drawer Bottom (Q5) into the grooves
of Drawer Sides (Q3) and (Q4) until it meets
Drawer Back (Q2).
Attach Drawer Front (Q1) to unit,
then flip the locks.
Machine Screw (short)
Figure 5 Figure 6
Q4
Q2
Q3

STEP 16
Level unit by adjusting
the adjustable levelers on
bottom of legs. (See Figure 7)
Slide Drawers (P), (Q) and
keyboard into position.
P
P
Q
Q
Figure 7
P
Machine Screw (long)
Knob
STEP 14
Attach Knobs to Drawers (P) with Machine Screws (long).
R
S
Wood Screw
for Hinge
Assembly Instructions 7/7
STEP 15
Attach Keyboard Front (S)
to Keyboard (R) with
Wood Screws for Hinge.
Attach Knobs to keyboard
with Machine Screws (long).
Knob
Machine Screw (long)

NEVER
use glass cleaners on
finished furniture. Ammonia
chemically attacks the finish.
allow liquids to remain on furniture.
Absorption causes parts to warp
and split and finishes to delaminate.
NEVER
CARE INSTRUCTIONS
Do not use rubber
based placemats.
PREVENT
DISCOLORING
Do not use commercial
waxes and polishes.
PREVENT
YELLOWING
Do not place hot
objects on surface.
PREVENT
FINISH DAMAGE
Do not write
directly on surface.
PREVENT
MARKING
Do not use power tools
above 8 volts to assemble.
PREVENT
CRACKING
Do not place
in direct sunlight.
PREVENT
FADING
with a soft cloth moistened
in lukewarm soap and water.
Buff with a dry clean cloth.
CLEAN
Home Styles will provide replacements free of charge for missing or damaged hardware or parts within 30 days of
purchase. Digital images of the defective parts may be required. If the product was not purchased from an authorized
retail affiliate, Home Styles is under no obligation to provide replacement parts. Parts are not available for fully assembled
items nor are parts available for sale. Replacements for missing or damaged hardware or parts may be requested at:
www.homestyles-furniture.com/customer-service/replacement-parts
Home Styles Customer Service: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319