Home Styles The Lafayette 88 5537 991 User manual

Part List
Hardware List
E.
Base
1 pc.
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the wood parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
A.
Top
1 pc. P1.
Rack
2 pcs.
P2.
Rack
4 pcs.
Casual Attire For Today's Home
Cam Lock
17 pcs.(+1 extra)
Cam Lock Screw
17 pcs.(+1 extra)
88 5537 991
Bar Cabinet
The Lafayette
F.
Plinth
1 pc.
Tools required for assembly : Phillips screwdriver
Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319
[email protected]
For assembly see instructions in carton 88 5537 992
Pull Handle
2 pcs.
Pull Handle
1 pc.
Adjustable Pin
20 pcs.(+1 extra) Machine Screw
2 pcs.
Machine Screw
1 pc.
M.
Center Shelf
1 pc.
Head Cap Bolt
for Leg
8 pcs. (+1 extra)
Head Cap Bolt
6 pcs. (+1 extra)
Hex Wrench
1 pc.
Wood Screw
for Magnet
4 pcs.(+1 extra)
Magnet
2 pcs.
Wood Screw (short)
28 pcs. (+1 extra)
Wood Screw (long)
16 pcs. (+1 extra)
Small
Hex Wrench
1 pc.
Nail
2 pcs.(+1 extra)
Steel Plate
for Pull Handle
Attachment
1 pc.
H.
Back Panel
1 pc.

Part List
B.
Side Panel
.1 pc D1.
Middle Panel
.1 pc
D2.
Middle Panel
.1 pc I.
Back Panel
2 pcs.
C.
Side Panel
1 pc.
J.
Door
1 pc.
K.
Door
1 pc.
N.
Leg
1 pc.
O.
Leg
4 pcs.
L.
Shelf
4 pcs.
Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319
[email protected]
Tools required for assembly : Phillips screwdriver
Also need the following from carton 88 5537 991 :
Hardware List in carton 88 5537 991
Small Hex Wrench
Hex Wrench
Head Cap Bolt
Head Cap Bolt for Leg
Cam Lock Screw
Cam Lock
Magnet
Wood Screw for Magnet
Wood Screw (short)
Wood Screw (long)
Adjustable Pin
Pull Handle
Machine Screw for Pull Handle
Drawer Pull Handle
Machine Screw for Drawer Pull Handle
Nail
Steel Plate For Pull Handle Attachment
Part List in carton 88 5537 991
Top (A)
Base (E)
Plinth (F)
Back Panel (H)
Shelf (M)
Rack (P1)
Rack (P2)
1 pc.
1 pc.
1 pc.
1 pc.
2 pcs.
4 pcs.
1 pc.
17 pcs.
21 pcs.
2 pcs.
2 pcs.
1 pc.
1 pc.
3 pcs.
1 pc.
1 pc.
1 pc.
7 pcs.
9 pcs.
18 pcs.
18 pcs.
2 pcs.
3 pcs.
29 pcs.
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the wood parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed. Casual Attire For Today's Home
P3.
Rack
2 pcs.
P4.
Rack
2 pcs.
P5.
Rack
1 pc. (Knock-Down Construction, please refer to
the last page of these instructions for steps
to assemble drawers)
Q.
Drawer
1 pc.
G.
Front Rail
1 pc.
88 5537 992
Bar Cabinet
The Lafayette

STEP 1
Assembly Instructions 2/6
F
A
B
E
D1
D2
C
Cam Lock Screw
IMPORTANT
You should keep Hex Wrench in a safe place
as you may need to tighten up the
Head Cap Bolts in the future.
Attach 2X Magnets to
Top (A) by using Wood Screws
in the pre-drilled holes (see Figure 1).
Insert Cam Lock Screws into the pre-drilled holes of Top (A).
Figure 1
STEP 2
Insert Cam Lock Screws
into the pre-drilled holes
of
.
Side Panel (B) and (C),
Middle Panels (D), Base (E)
and Plinth (F)
Magnet

D1 D2
STEP 3
STEP 4
Assembly Instructions 3/6
Cam Lock
Screw
Cam Lock
Figure 2
E
E
Attach Front Rail (G) in
between Middle Panels (D1) and (D2)
with Cam Locks (see Figure 2).
Attach Middle Panel (D1) and (D2) onto Base (E) with Cam Locks.
B
C
F
G
Cam Lock
Attach Plinth (F) to the unit with Cam Locks.
Attach Side Panel (B) and (C) to the unit with Cam Locks.
Attach Legs (O) to the unit with Head Cap Bolts (see Figure 3).
Attach Legs (N) into the pre-drilled holes of Base (E) and tighten.
N
O
O
O
O
Head Cap Bolt
Figure 3
B

Assembly Instructions 4/6
STEP 5
STEP 6
STEP 7
H
II
P1
P2 P2
P2
P2
P1
P3
P5
P4 P4
P3
L
L
L
L
A
Cam Lock
Head Cap Bolt
Insert Adjustable Pins into
side panels and middle panels
at the desired level.
Place Shelves (L) into position.
Attach Racks (P3) to Racks (P1)
with Wood Screws (long).
Assemble Racks (P2) with (P4)
as shown, then place it into
position.
Attach Rack (P5) to the unit
with Wood Screws (short).
Adjustable Pin
Slide Back Panels (H) and (I)
into place.
Place Top (A) onto the unit,
using Cam Locks
and Head Cap Bolts.
Wood Screw (long)
Wood Screw (short)