Home Styles 88 5029 9411 User manual

IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damage occurring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Part List
Home Styles ConsumerAssistance: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
For assembly see instructions in carton 88 5029 943
88 5029 9411
Kitchen Island
with Wood Top
A2.
Leaf Top
1 Pc.
A1.
Top
1 Pc.
PATENT 8,584,600 B2

IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damage occurring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Part List
Home Styles ConsumerAssistance: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
For assembly see instructions in carton 88 5029 943
88 5029 9412
Kitchen Island
with Granite Top
A1.
Top
1 Pc.
A2.
Leaf Top
1 Pc.
PATENT 8,584,600 B2

IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damage occurring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Part List
Home Styles ConsumerAssistance: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
88 5029 942
Kitchen Island
For assembly see instructions in carton 88 5029 943
PATENT 8,584,600 B2
O.
Frame Leg
1 Pc.
P.
Frame Leg
1 Pc.

IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damage occurring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Part List
Home Styles ConsumerAssistance: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
Hardware List
88 5029 943
Kitchen Island
Tools required for assembly : Phillips screwdriver
Also need the part(s) from carton 88 5029 942, 88 5029 941 or 88 5029 9411
Tools recommended for assembly : Level
PATENT 8,584,600 B2
Cam Lock
15 Pcs. (+6 extra)
Hex Wrench
1 Pc.
Small Hex Wrench
1 Pc.
Adjustable Pin
16 Pcs. (+1 extra)
Magnet
2 Pcs.
Long Wood Screw
16 Pcs. (+1 extra)
M3x12
Wood Screw for Magnet
4 Pcs. (+1 extra)
M3x25 Flat Washer
8 Pcs. (+1 extra)
Wood Screw
8 Pcs. (+1 extra)
M6x38
Head Cap Bolt (long)
8 Pcs. (+1 extra)
M6x32
Head Cap Bolt (short)
8 Pcs. (+1 extra)
M3x15
Pull Handle
4 Pcs.
Machine Screw
4 Pcs.
M4x25
Cam Lock Screw
15 Pcs. (+2 extra)
B.
Side Panel
1 Pc.
D.
Middle Panel
1 Pc.
C.
Side Panel
1 Pc.
K.
Shelf
4 Pcs.
E.
Front Rail
1 Pc.
F.
Front Rail
1 Pc.
H.
Upright
1 Pc.
I.
Back Panel
2 Pcs.
G.
Back Stretcher
2 Pcs.
M.
Door
1 Pc.
J.
Base
1 Pc.
L.
Door
1 Pc.
N.
Drawer
2 Pcs.
(Please refer to the last page(s) of
instructions for steps to complete drawer assembly)
3/4”
Flat Head Screw
12 Pcs. (+1 extra)

Assembly Instructions
IMPORTANT
* Please keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* Do not tighten up all the bolts until each part is properly assembled.
* Use a soft cloth between these parts and the floor.
*After assembly item must be level to work properly. Use the included adjustable levelers to level.
STEP 1
Insert Cam Lock Screws into
the pre-drilled holes in Side Panels (B), (C),
Front Rails (E) and (F), Upright (H),
Back Stretchers (G) and Base (J). (See Figure 1)
Attach Magnets to Front Rail (F) with Wood Screws.
(See Figure 2)
STEP 2
Attach Back Stretcher (G)
to Side Panel (B) with
Cam Lock.
Attach Upright (H)
to Back Stretcher (G) then slide
Back Panels (I) into place.
Attach Back Stretcher (G) to unit with Cam Lock.
B
F
J
I
I
B
G
G
H
C
HEGG
Figure 1
Figure 2
Cam Lock Screw
Magnet
Wood Screw
2/7

Assembly Instructions
STEP 3
Attach Middle Panel (D)
to unit with Cam Locks.
Attach Front Rails (E) and (F) to unit with Cam Locks.
Attach Side Panel (C) to unit with Cam Locks.
STEP 4
Attach Base (J) to unit with
Head Cap Bolts (long), Flat Washer and Cam Locks.
J
D
F
E
C
Head Cap Bolt (long)
Flat Washer
3/7

Assembly Instructions
STEP 6
Place Top (A1) and Leaf Top (A2)
upside down on a soft cloth.
Attach Top (A1) to Leaf Top (A2)
using Flat Head Screws.
K
K
K
K
P
O
A1
A2
Flat Head Screw
Adjustable Pin
STEP 7
Insert Adjustable Pins into
side panels and middle panels
at the desired level.
Slide Shelves (K) into position.
Attach top unit to body unit
with Head Cap Bolts (long)
and Flat Washers.
Head Cap Bolt (short)
STEP 5
Turn unit to its’
upright position.
Attach Frame Legs
(O) and (P) to unit
with Head Cap Bolts (short).
4/7

Assembly Instructions
STEP 8
Attach Pull Handles to Doors (L) and (M) with Machine Screws. (See Figure 3)
Attach Doors (L) and (M) to unit with Wood Screws. (See Figure 4)
Insert Adjustable Pins into the side and middle panels at the desired level.
Slide Drawers (N) into position.
To level the unit, adjust the adjustable levelers on the bottom of the unit.
(See Figure 5)
Note: Unit must be level to work properly.
Figure 3 Figure 4
Figure 5
M
N
N
L
5/7

Assembly Instructions
STEP 9
When Leaf Top is down, it should be oriented vertically.
If it is not vertical and adjustment is desired, loosen the
Head Cap Bolts (short) which attach Top (A) to unit.
Slide Top (A) slightly forward or backward unit the
Leaf Top is oriented vertically.
Re-tighten the Head Cap Bolts.
TOP EXTENSION INSTRUCTIONS
STEP 1
Lift up the Leaf Top.
STEP 2
Holding the Leaf Top up,
pull out a back leg from the unit;
then pull out the other back leg.
Note: Unit must be level for the back legs to be pulled out.
90
O
6/7

Assembly Instructions
Part List
Drawer N
N1.
Front Part
2 Pcs.
N2.
Back Part
2 Pcs.
N3.
Side Part
2 Pcs.
N4.
Side Part
2 Pcs.
N5.
Base Part
2 Pcs.
N1
N2
N5
N3
N4
STEP 1
Attach Side Part N3 to Front Part (N1)
and Back Part (N2) using a Phillips
screwdriver and long wood screws
(4X), tighten halfway. (See Figure 1)
STEP 2
Insert Base Part (N5) into the groove.
Attach Side Part (N4) to Front Part (N1) and
Back Part (N2) using a Phillips screwdriver
and long wood screws (4X). (See Figure 2)
Tighten all wood screws used in drawer assembly.
Figure 1
Figure 2
Figure 3
MAKE SURE ROLLER
IS ON THE BACK
7/7
STEP 3
Attach Drawer Handles with Machine Screws.
(See Figure 3)