Home Styles 88 5527 49 User manual

Part List
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the wood parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed. Casual Attire For Today's Home
Hardware List
Tools required for assembly : Phillips screwdriver
Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319
[email protected]
Hall Tree Stand
(Warm Oak)
88 5527 49
Wood Screw for
Spring
8 pcs. (+1 extra)
Wood Screw
for Hook
8 pcs. (+1 extra)
A.
Seat
1 pc.
B.
Side Panel
1 pc.
C.
Side Panel
1 pc.
D.
Front Panel
1 pc.
E.
Back Stretcher
1 pc.
G.
Back Panel
1 pc.
F.
Back Stretcher
2 pcs.
H.
Arm
1 pc.
I.
Arm
1 pc.
K.
Base
1 pc. N.
Side Panel
1 pc.
O.
Side Panel
1 pc.
L.
Front Stretcher
1 pc.
M.
Top
1 pc.
J.
Leg
1 pc.
P.
Rail
1 pc.
Q.
Back Panel
2 pcs.
R.
Back Panel
1 pc.
S.
Back Stretcher
1 pc.
T.
Back Stretcher
1 pc.
Spring Support
2 pcs.
Small Hex Wrench
1 pc.
Hex Wrench
1 pc.
Head Cap Bolt
15 pcs. (+1 extra)
Cam Lock
24 pcs. (+1 extra)
Cam Lock Screw
24 pcs. (+1 extra)
Hook
4 pcs.
Wood Screw for
Back Panel
24 pcs. (+1 extra)

Assembly Instructions 2/6
IMPORTANT
* Do not tighten up all the screws until each part is properly assembled.
* You should keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
STEP 1
Attach Legs (J) to Base (K)
with Head Cap Bolts.
Head Cap Bolts
K
J
Put Cam Lock Screws into the pre-drilled holes of Side Panel (B), (C), (N), (O) Base (K),
Top (M) and tighten.
STEP 2
BC
Cam Lock Screw
NO
K
M
Cam Lock Screw
J
J
J

Assembly Instructions 3/6
STEP 3
B
C
D
E
F
G
Cam Lock
Attach Back Stretcher (E) and (F) to Side Panel (B)
using Cam Locks.
Slide Back Panel (G) into place.
Attach Front Panel (D) to Side Panel (B) using Cam Locks.
Attach Side Panel (C) to unit using Cam Locks.
Attach Base (K) to unit using Cam Locks.
STEP 4
K
Cam Lock

Assembly Instructions 4/6
STEP 5
Attach Front Stretcher (L)
Back Stretcher (F) and (S)
to Side Panel (N) using
Cam Locks.
Slide Back Panels (G) to unit.
Attach Rail (P) to Back Stretcher (S)
and slide Back Panels (Q) to unit.
Attach Back Stretcher (T) to unit
using Cam Lock.
Attach Side Panel (O) to unit
using Cam Locks.
STEP 6
M
H
I
Attach Top (M) to unit using Cam Locks.
Attach Arm (H) and (I) to unit
with Head Cap Bolts.
Cam Lock
Head Cap Bolt
N
O
L
F
G
P
Q
Q
T
Cam Lock
S

Assembly Instructions 5/6
STEP 7
Place the Top unit onto the Base Unit
with Head Cap Bolts.
Spring Support
A
STEP 8
Figure 1
Spring Support
Wood Screw
for Spring Support
A
Head Cap Bolt
Head Cap Bolt
Place Seat (A) upside down on a soft cloth
then attach Spring Support to the Seat (A)
with Wood Screws. (see Figure 1)
Attach the Seat (A) to the Base unit with Head Cap Bolts.

Assembly Instructions 6/6
Hook
STEP 9
Figure 2
Hook
Wood Screw
for Hook
STEP 10
Wood Screw for Back Panel
Attach Hooks to the top of unit with Wood Screws for Hooks.
(see Figure 2)
Attach Wood Screws for Back Panel
to the back of the unit.