Home Styles 20 05186 0026 User manual

20 05186 0026
Bench
I.
Door
1 pc.
B.
Side Panel
1 pc.
Home Styles Customer Service: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
IMPORTANT
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
H.
Back Panel
1 pc.
F.
Foot
1 pc.
E.
Base
1 pc.
C.
Side Panel
1 pc.
D.
Middle Panel
1 pc.
G.
Shelf
2 pcs.
J.
Door
1 pc.
Tool(s) required for assembly: Phillips screwdriver, Level
Hardware List
Part List
Hex Wrench
1 pc.
Small Hex Wrench
1 pc.
M6x32
Head Cap Bolt
8 pcs. (+1 extra)
Spring Washer
8 pcs. (+1 extra)
Flat Washer
8 pcs. (+1 extra)
Handle
2 pcs.
Machine Screw
4 pcs.
M4x22
A.
Seat
1 pc.
Adjustable Pin
8 pcs. (+1 extra)
Magnet
2 pcs.
M3x14
Magnet Screw
4 pcs. (+1 extra)

Assembly Instructions 2/4
STEP 2
Attach Side Panels (B) and (C) to unit with Head Cap Bolts,
Spring Washers and Flat Washers, then flip Locks. (See Figure 3)
Attach Middle Panel (D), then flip Locks.
Attach Foot (F) to unit, then tighten.
STEP 1
Attach Back Panel (H) to Base (E),
then flip Locks. (See Figures 1 and 2)
Figure 1 Figure 2
H
E
Flat Washer
Lock
Spring Washer
Head Cap Bolt
Lock
F
B
C
Figure 3
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
The unit must be level to work properly. Use the included adjustable levelers to level.
Keep Hex Wrench as the bolts may need to be tightened in the future.
D

Assembly Instructions 3/4
STEP 4
Turn unit to its upright position.
Attach Doors (I) and (J) to unit by sliding
door hinges into side panel hinges. (See Figure 5)
Attach Seat (A) to unit with Head Cap Bolts, Spring Washers and Flat Washers, then flip Locks.
Lock
Flat Washer
Spring Washer
Head Cap Bolt
Figure 4
STEP 3
Place Seat (A) upside down on a soft cloth.
Attach Magnets to Seat (A) with Magnet Screws into pre-drilled holes. (See Figure 4)
A
Magnet Screw
Magnet
A
I
J
Figure 5

Assembly Instructions 4/4
STEP 5
Attach Handles to Doors (I) and (J) with Machine Screws. (See Figure 6)
Insert Adjustable Pins into side panels and middle panel at desired level. (See Figure 7)
Place Shelves (G) into position.
Level unit by adjusting the adjustable levelers on bottom of unit. (See Figure 8)
Figure 8
Adjustable Pin
Machine Screw
Handle
G
G
Figure 6 Figure 7
I
J

NEVER
use glass cleaners on
finished furniture. Ammonia
chemically attacks the finish.
allow liquids to remain on furniture.
Absorption causes parts to warp
and split and finishes to delaminate.
NEVER
CARE INSTRUCTIONS
Do not use rubber
based placemats.
PREVENT
DISCOLORING
Do not use commercial
waxes and polishes.
PREVENT
YELLOWING
Do not place hot
objects on surface.
PREVENT
FINISH DAMAGE
Do not write
directly on surface.
PREVENT
MARKING
Do not use power tools
above 8 volts to assemble.
PREVENT
CRACKING
Do not place
in direct sunlight.
PREVENT
FADING
with a soft cloth moistened
in lukewarm soap and water.
Buff with a dry clean cloth.
CLEAN
Home Styles will provide replacements free of charge for missing or damaged hardware or parts within 30 days of
purchase. Digital images of the defective parts may be required. If the product was not purchased from an authorized
retail affiliate, Home Styles is under no obligation to provide replacement parts. Parts are not available for fully assembled
items nor are parts available for sale. Replacements for missing or damaged hardware or parts may be requested at:
www.homestyles-furniture.com/customer-service/replacement-parts
Home Styles Customer Service: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319