Home Styles 20 05186 0049 User manual

20 05186 0049
Hall Tree
P.
Door
1 pc.
L.
Back Support
2 pcs.
I.
Back Panel
1 pc.
B.
Side Panel
1 pc.
Part List
Home Styles Customer Service: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
IMPORTANT
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
A.
Seat
1 pc.
H.
Back Panel
1 pc.
F.
Foot
1 pc.
G.
Support
2 pcs.
E.
Base
1 pc.
C.
Side Panel
1 pc.
D.
Middle Panel
1 pc.
R.
Shelf
2 pcs.
J.
Back Panel
1 pc.
O.
Top
1 pc.
M.
Post
1 pc.
N.
Post
1 pc.
K.
Back Panel
1 pc.
Q.
Door
1 pc.
Tool(s) required for assembly: Phillips screwdriver, Level, Drill (8 volts or less), 3/8” Drill Bit

Home Styles Customer Service: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
Hardware List
Magnet
2 pcs.
Adjustable Pin
8 pcs. (+1 extra)
Hook
4 pcs.
M6x32
Head Cap Bolt (short)
8 pcs. (+1 extra)
M6x38
Head Cap Bolt
6 pcs. (+1 extra)
M6x64
Head Cap Bolt (long)
4 pcs. (+1 extra)
Spring Washer
18 pcs. (+1 extra)
Flat Washer
18 pcs. (+1 extra)
M3x14
Flat Head Screw
8 pcs. (+1 extra)
M3.5x25
Flat Head Screw (long)
12 pcs. (+1 extra)
Assembly Instructions 2/9
Hex Wrench
1 pc.
Small Hex Wrench
1 pc.
M3x14
Magnet Screw
4 pcs. (+1 extra)
Cam Lock
14 pcs. (+4 extra)
Cam Lock Screw
14 pcs. (+2 extra)
Mx422
Machine Screw
4 pcs.
Handle
2 pcs.

Assembly Instructions 3/9
STEP 2
Attach Side Panels (B) and (C) to unit with Head Cap Bolts (short),
Spring Washers and Flat Washers, then flip Locks. (See Figure 3)
Attach Middle Panel (D), then flip Locks.
Attach Foot (F) to unit, then tighten.
STEP 1
Attach Back Panel (H) to Base (E),
then flip Locks. (See Figures 1 and 2)
Figure 1 Figure 2
H
E
Flat Washer
Lock
Spring Washer
Head Cap Bolt (short)
Lock
F
B
C
Figure 3
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
The unit must be level to work properly. Use the included adjustable levelers to level.
Keep Hex Wrench as the bolts may need to be tightened in the future.
D

Assembly Instructions 4/9
Cam Lock Screw
STEP 3
Insert Cam Lock Screws into pre-drilled holes
in Seat (A), Posts (M), (N) and Top (O), then tighten.
(See Figure 4)
STEP 4
Orientate Back Panel (J) with Arrow label pointing to Back Panel (I),
then place Back Panels (I), (J) and (K) upside down on a soft cloth.
Attach Back Supports (L) to Back Panels (I), (J) and (K) with Flat Head Screws (long),
into pre-drilled holes. (See Figure 5)
Flat Head Screw (long)
Arrow label pointing to Back Panel (I)
Figure 4
M
N
A
O
I
J
K
L
L
Figure 5

Figure 6
Assembly Instructions 5/9
STEP 5
Attach Posts (M) and (N) to unit with Cam Locks. (See Figure 6)
Attach Top (O) to unit with Head Cap Bolts, Spring Washers, Flat Washers and Cam Lock.
M
N
O
Head Cap Bolt
Spring Washer
Flat Washer
Cam Lock

Assembly Instructions 6/9
A
G
G
Head Cap Bolt
Spring Washer
Flat Washer
Head Cap Bolt (long)
Spring Washer
Flat Washer
Cam Lock
Magnet Screw
Magnet
STEP 6
Attach Supports (G) to unit with Head Cap Bolts (long), Spring Washers and Flat Washers.
Attach Magnets to Seat (A) with Magnet Screws. (See Figure 7)
Attach Seat (A) to unit with Head Cap Bolts, Spring Washers, Flat Washers and Cam Lock.
Figure 7

Assembly Instructions 7/9
STEP 7
Turn unit to its upright position.
Attach Doors (P) and (Q) to unit from Step 2 by sliding
door hinges into side panel hinges. (See Figure 8)
Attach unit from Step 6 to unit with Head Cap Bolts (short), Spring Washers and Flat Washers,
then flip Locks.
Attach Hooks to unit with Flat Head Screws into pre-drilled holes. (See Figure 9)
Figure 9
P
Q
Lock
Flat Washer
Spring Washer
Head Cap Bolt (short)
Flat Head Screw
Hook
Figure 8

Assembly Instructions 8/9
STEP 8
Attach Handles to Doors (P) and (Q) with Machine Screws. (See Figure 10)
Insert Adjustable Pins into side panels and middle panel at desired level.
(See Figure 11)
Place Shelves (R) into position.
Level unit by adjusting the adjustable levelers on bottom of unit.
(See Figure 12)
Figure 11
Figure 12
Figure 10
RR
Adjustable Pin
Machine Screw
Handle
P
Q

Assembly Instructions 9/9
Hardware List
IMPORTANT
To help reduce the risk of the unit tipping over, the Tipover Restraint must be installed following these instructions exactly.
Anchor
1 pc. (+1 extra)
Bracket
2 pcs. (+1 extra)
Tipover Restraint
1 pc. (+1 extra)
M3.5x40
Wall Screw
1 pc. (+1 extra)
M3.5x16
Wood Screw
1 pc. (+1 extra)
STEP 9
Place unit at desired location.
Drill a 3/8” hole in wall in-line with
pre-drilled hole at top of unit.
Move unit.
Insert Anchor into the wall hole
and attach Bracket with Wall Screw.
Attach Bracket at pre-drilled hole
at top of unit with Wood Screw.
Move unit back into place.
Slide Tipover Restraint through
Bracket on wall and Bracket on unit.
(See Figure 13)
Put tie end of Tipover Restraint into lock
end of Tipover Restraint and pull until tight.
Bracket
on wall
Anchor in wall
3/8” wall hole
Tie end
Lock end
Bracket at
top of unit
Tipover
Restraint
Figure 13
Wood Screw
Wall Screw Pre-drilled hole
at top of unit
Drill 3/8” hole in wall
Top of unit

NEVER
use glass cleaners on
finished furniture. Ammonia
chemically attacks the finish.
allow liquids to remain on furniture.
Absorption causes parts to warp
and split and finishes to delaminate.
NEVER
CARE INSTRUCTIONS
Do not use rubber
based placemats.
PREVENT
DISCOLORING
Do not use commercial
waxes and polishes.
PREVENT
YELLOWING
Do not place hot
objects on surface.
PREVENT
FINISH DAMAGE
Do not write
directly on surface.
PREVENT
MARKING
Do not use power tools
above 8 volts to assemble.
PREVENT
CRACKING
Do not place
in direct sunlight.
PREVENT
FADING
with a soft cloth moistened
in lukewarm soap and water.
Buff with a dry clean cloth.
CLEAN
Home Styles will provide replacements free of charge for missing or damaged hardware or parts within 30 days of
purchase. Digital images of the defective parts may be required. If the product was not purchased from an authorized
retail affiliate, Home Styles is under no obligation to provide replacement parts. Parts are not available for fully assembled
items nor are parts available for sale. Replacements for missing or damaged hardware or parts may be requested at:
www.homestyles-furniture.com/customer-service/replacement-parts
Home Styles Customer Service: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319