Home Styles 88 5033 941 User manual

Part List
88 5033 941
Nantucket Kitchen Island
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Tools required for assembly : Phillips screwdriver
Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319
[email protected]
A1.
Top
1 pc.
J.
Stretcher
1 pc.
H1.
Front Rail
1 pc.
R.
Leg Support
1 pc.
Q.
Plinth
2 pcs.
O.
Back Support
1 pc.
N.
Back Support
1 pc.
V.
Drawer
1 pc.
Also need the following from carton 88 5033 942 :
Hardware List in carton 88 5033 942
Hex Wrench
Small Hex Wrench
Cam Lock Screw
Cam Lock
Head Cap Bolt
Adjustable Pin
Pull Handle
Knob
Machine Screw
Wood Screw (long)
Wood Screw (short)
Wood Screw for Hinge
1 pc.
1 pc.
16 pcs.
16 pcs.
24 pcs.
20 pcs.
2 pcs.
2 pcs.
6 pcs.
8 pcs.
6 pcs.
27 pcs.
Tools recommended for assembly :Level
A2.
Top
1 pc.
Part List in carton 88 5033 942
Side Panel (B)
Side Panel (C)
Side Panel (D)
Side Panel (E)
Side Panel (F)
Side Panel (G)
Front Rail (H2)
Back Stretcher (I)
Back Panel (K)
Shelf (L)
Shelf (M)
Base (P)
1 pc.
1 pc.
1 pc.
1 pc.
1 pc.
1 pc.
2 pcs.
2 pcs.
2 pcs.
4 pcs.
1 pc.
1 pc.
Part List in carton 88 5033 942
Plinth (S)
Door (T)
Door (U)
2 pcs.
1 pc.
1 pc.

Part List
Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319
[email protected]
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Tools required for assembly : Phillips screwdriver
88 5033 942
Nantucket Kitchen Island
C.
Side Panel
1 pc.
B.
Side Panel
1 pc.
D.
Side Panel
1 pc. E.
Side Panel
1 pc.
F.
Side Panel
1 pc.
G.
Side Panel
1 pc.
I.
Back Stretcher
2 pcs.
K.
Back Panel
2 pcs.
L.
Shelf
4 pcs.
M.
Shelf
1 pc.
P.
Base
1 pc.
U.
Door
1 pc.
T.
Door
1 pc.
For assembly see instructions in carton 88 5033 941
Hex Wrench
1 pc.
Head Cap Bolt
24 pcs. (+1 extra)
Cam Lock
16 pcs.(+1 extra)
Cam Lock Screw
16 pcs.(+1 extra)
Machine Screw
6 pcs.
Adjustable Pin
20 pcs. (+1 extra)
Small
Hex Wrench
1 pc.
Pull Handle
2 pcs.
Wood Screw (short)
for Drawer Base Part
6 pcs. (+1 extra)
Wood Screw (long)
for Drawer Side Part
8 pcs. (+1 extra)
Pull Handle
2 pcs.
Hardware List
Tools recommended for assembly :Level
S.
Plinth
2 pcs.
H2.
Front Rail
1 pc.
Wood Screw
for Hinge
27 pcs. (+2 extra)

Assembly Instructions 2/6
STEP 1
IMPORTANT
* Do not tighten up all the screws until each part is properly assembled.
*You should keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* After assembly, item must be level to work properly. Use the included adjustable levelers to level.
Attach Top (A1) to Top (A2) with
Wood Screws.
Put Cam Lock Screws into
the pre-drilled holes of Top (A1),
Side Panel (D), (E), (F), (G)
and tighten.
Cam Lock Screw
A1
D
E
F
G
A2
A1
Wood Screw
Cam Lock Screw

Assembly Instructions 3/6
STEP 2
STEP 3
D
E
B
P
Attach Side Panel (B) to Base (P) with
Head Cap Bolts.
Attach Side Panels (D) and (E) to
Base (P) with Head Cap Bolts.
(see Figure 1)
H1
I
I
J
Attach Front Rail (H1) and
Front Rail (H2) to unit
using Cam Locks.
(see Figure 1)
Attach Back Stretcher (I) to unit using
Cam Locks.
Slide Back Panel (K) into Place.
Attach Stretcher (J) to unit then slide Back Panel (K)
into place.
Head Cap Bolt
K
K
H2

Assembly Instructions 4/6
STEP 4
Attach Side Panel (C) to Base (P)
with Head Cap Bolts.
Attach Side Panels (F) and (G) to
unit with Head Cap Bolts.
P
F
G
C
Q
Q
R
S
S
P
STEP 5
Attach Plinths (Q) to Base (P)
with Head Cap Bolts.
Attach (S) and Leg Support (R)
to
Plinths
unit with Head Cap Bolts.
Head Cap Bolt
Cam Lock
Head Cap Bolt

Assembly Instructions 5/6
STEP 7
STEP 6
Attach Back Support (N) and (O)
to unit with Wood Screws into
pre-drilled holes.
ON
A
Place Top (A) onto unit with Cam Locks.
Attach Doors (T) and (U) by sliding the door lift hinges into the side panels lift hinges.
(see Figure 1)
Assemble Pull Handles to Doors (T) and (U) with Machine Screws.
(see Figure 2)
Slide the Drawers (V) into position.
Insert Adjustable Pins into side panels at the desired level,
then place Shelves (L) and (M) into position.
T
U
L
L
L
L
M
V
Figure 1
Figure 2
Adjustable Pin
Cam Lock
Wood Screw
(Figure 3)
To level the unit, adjust the adjustable levelers on the bottom of unit. (see Figure 3)
Note: Unit must be level to work properly.

V2
V3
V4
V5
V1
(Figure 3)
Assembly Instructions 6/6
Insert wood screws (6X)
into the pre-drilled holes in V5,
tighten screws. (see Figure 3)
short
Attach hardware pulls with
machine screws.
(see Figure 4)
Slide V5 into the grooves in V3
and V4. Be sure to push V5 all
the way forward to it meets V1.
(see Figure 2)
STEP 4
Tighten all screws used in
drawer assembly.
(Figure 1)
(Figure 2)
MAKE SURE ROLLER
IS ON THE BACK
V2
V3
V4
V5
V1
Drawer
Part List
V1.
Front Part
1 pc.
V5.
Base Part
1 pc.
V2.
Back Part
1 pc.
V3.
Side Part
1 pc.
V4.
Side Part
1 pc.
(Figure 4)
STEP 1
STEP 2
STEP 3
Attach V1 to V3 and V4, using
a and
wood screws ,
tighten halfway.
Attach V2 to V3 and V4 using
wood screws ,
tighten halfway. (see Figure 1)
Phillips screwdriver
long
long
(4X)
(4X)
V1
V2
V4
V3