Home Styles 88 5531 49 User manual

PART LIST
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the wood parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Tools Required For Assembly : Phillips screwdriver
Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319
[email protected]
88 5531 49
HARDWARE LIST
Hall Tree Stand
(Ebony Finish)
I.
Base
1 pc.
B.
Side Panel
1 pc.
C.
Side Panel
1 pc.
D.
Front Panel
1 pc.
E.
Plinth
1 pc.
H.
Back Rail
1 pc.
G.
Back Panel
1 pc.
J.
Shelf
1 pc.
N.
Front Rail
1 pc.
P.
Arm
1 pc.
Q.
Arm
1 pc.
R.
Divider
1 pc.
S.
Side Panel
1 pc.
T.
Side Panel
1 pc.
K.
Top
1 pc.
O.
Back Rail
2 pcs.
U.
Back Rail
1 pc.
L.
Back Rail
1 pc.
V.
Back Rail
1 pc.
M.
Back Panel
2 pcs.
W.
Back Panel
2 pcs.
A.
Seat
1 pc.
F.
Back Rail
1 pc.
Hex Wrench
1 pc.
42 pcs. (+1 extra)
4 pcs. (+1 extra)
Hex Wrench
1 pc.
Spring Support
2 pcs. Hook
4 pcs.
Wood Screw for
Arm and Side Panel S. , T.
Wood Screw for
Spring , Back Panel
and Baes 8 pcs. (+1 extra)
Wood Screw
for Hook 24 pcs. (+1 extra)
Cam Lock
24 pcs. (+1 extra)
Cam Lock Screw
Head Cap Bolt
(Long)
8 pcs. (+1 extra)
Head Cap Bolt
(Short)
6 pcs. (+1 extra)

S
C
Assembly Instructions 2/6
IMPORTANT
Do not tighten up all the screws until each part is properly assembled.
You should keep Hex Wrench in a safe place as you may need to tighten the Head Cap Bolts in the future.
Head Cap Bolt (Short)
Cam Lock Screw
Cam Lock Screw
Cam Lock Screw
STEP 2
Attach Front Panel (D) to Plinth (E) with
Head Cap Bolts (Short).
B
T
K
E
D
STEP 1
Insert Cam Lock Screws into the
pre-drilled holes of Side Panel (B),
(C) and Side Panel (S) , (T) and
Top (K) then tighten.

Assembly Instructions 3/6
STEP 5
Insert Base (I) to the unit with
Wood Screws.
B
G
H
F
D
STEP 3
Attach Front (D) to Side Panel (B) with Cam Locks and
Head Cap Bolt (Short).
Attach Back Rail (F) , (H) to Side Panel (B) with Cam Locks.
Slide Back Panel (G) to the unit.
I
C
STEP 4
Attach Side Panel (C) to the unit with Cam Locks
and Head Cap Bolt (Short).
Wood Screw
Head Cap Bolt (Short)
Cam Lock
Cam Lock
Head Cap Bolt (Short)

Assembly Instructions 4/6
STEP 8
Attach Side Panel (T) to the unit with
Cam Locks.
O
U
V
L
W
M
S
W
M
O
STEP 6
Attach Back Rail (U) to Side Panel (S)
with Cam Lock.
Attach Back Panel (W) , (M) to Side
Panel (S) and Back Rail (U).
Attach Back Rail (L) to Back Panel (M)
and Back Rail (U).
Attach Back Rail (V) to Back Panel (W)
and Back Rail (U).
Attach Back Panel (W) , (M) and Back
Rail (O) to the unit with Cam Locks.
J
N
STEP 7
Attach Front Rail (N) and Shelf (J) to the unit with
Cam Locks.
T
Cam Lock
Cam Lock
Cam Lock

Assembly Instructions 5/6
R
K
Q
STEP 9
Attach Arm (P) , (Q) to the unit with Wood Screw for Arm.
Attach Divider (R) and Top (K) to unit with
Cam Locks.
STEP 11
STEP 10
Place the Top unit onto the Base Unit
with Head Cap Bolts (Long).
Head Cap Bolt (Long)
PPP
Wood Screw for Arm
Attach the Seat (A) to the Base unit with
Head Cap Bolts (Long).
A
Figure 1.1
Wood Screw
for Spring
Support
Spring
Support
Figure 1.2
Head Cap Bolt (Long)
Figure 1.3
Attach Spring Support to the unit with
Wood Screws into the pre-drilled holes.
(see Figure 1.1, 1.2, 1.3)
STEP 12
Spring Support

Assembly Instructions 6/6
Figure 2
STEP 14
Attach Wood Screws for Back Panel
to the back of the unit.
STEP 13
Attach Hooks to the top of the unit with Wood Screws for Hooks.
(see Figure 2)
Wood Screw for Back Panel
Hook
Hook
Wood Screw
for Hook