Home Styles Modern Craftsman 88 5050 16 User manual

IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Part List
Home Styles ConsumerAssistance: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
Hardware List
88 5050 16
Modern Craftsman
Student Desk
C.
Side Frame
1 Pc.
B.
Side Frame
1 Pc.
F.
Back Stretcher
1 Pc.
G.
Stretcher
1 Pc.
D.
Front Rail
1 Pc.
E.
Middle Rail
1 Pc.
A.
Top Unit
1 Pc.
H.
Drawer Front
1 Pc.
Hex Wrench
1 Pc.
Small Hex Wrench
1 Pc. M6x16 Head Cap Bolt
8 Pcs.(+1 extra)
M6x16
Tapered Head Cap Bolt
4 Pcs.(+1 extra)
Flat Washer
8 Pcs.(+1 extra)
Spring Washer
8 Pcs.(+1 extra)
M3x10
Tapered Wood Screw
6 Pcs.(+1 extra)
M4x12
Wood Screw
10 Pcs.(+1 extra)
Tools required for assembly : Phillips screwdriver Tools recommended for assembly : Level

Assembly Instructions 2
IMPORTANT
* Please keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* Do not tighten up all the screws until each part is properly assembled.
* Use a soft cloth between these parts and the floor.
*After assembly, item must be level to work properly.
Use the included adiustable levelers to level.
STEP 1
Remove the drawer from Top Unit (A) by
pushing the plastic lever on its’ left side up,
pushing the plastic lever on its’ right side down
and pulling the drawer open slowy. (see Figure1)
B
G
B
F
A
B
C
B
BB
D
B
E
STEP 2
Attach Front Rail (D), Middle Rail (E) and
Stretcher (G) to Side Frame (B) with
Flat Washers, Spring Washers and Head Cap Bolts.
Attach Back Stretcher (F) to unit with Tapered Head Cap Bolts.
Attach Side Frame (C) to unit with Flat Washers, Spring Washers,
Head Cap Bolts and Tapered Head Cap Bolts.
Flat Washer
Spring Washer
Head Cap Bolt
Tapered
Head Cap Bolt
Figure 1
/4

Assembly Instructions 3
E
A
Wood Screw
Machine Screw
STEP 3
Place Top Unit (A)
upside down on a soft cloth.
Attach unit to Top Unit (A) with
Wood Screws at the pre-drilled holes.
STEP 4
Remove the pull handles from the back side
of Drawer Front (H) and attach them to the
front side with Machine Screws.
Attach Drawer Front (H) to drawer
with Tapered Wood Screws at the
pre-drilled holes. B
H
B
H
Tapered Wood Screw
/4

Assembly Instructions 4
STEP 5
Turn the unit to its’ upright position.
Slide drawer into position.
To level the unit, adjust the adjustable levelers on the bottom
of the legs.(see Figure 2)
Note: Unit must be level to work properly.
Figure 2
/4