Home Styles LAF 6730-605 User manual

Hardware List
Part List
IMPORTANT
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
6730-605
LAF Loveseat
A.
Arm
1 pc.
L.
Back Cushion
2 pcs.
J.
Seat Cushion
1 pc.
B.
Back
1 pc.
C.
Seat
1 pc.
styles Customer Service: www.homestylesfurniture.com,home
[email protected], 888-680-7460
Small
Hex Wrench
1 pc.
Hex Wrench
1 pc.
Spring Washer
8 pcs. (+1 extra)
M6x35
Head Cap Bolt
6 pcs. (+1 extra)
M6x25
Head Cap Bolt (short)
2 pcs. (+1 extra)
Flat Washer
8 pcs. (+1 extra)
Cap
8 pcs. (+1 extra)

Assembly Instructions 2/3
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
Keep Hex Wrench as the bolts may need to be tightened in the future.
STEP 2
Attach Arm (A) to unit with
Head Cap Bolts, Head Cap Bolts (short),
Spring Washers and Flat Washers, tightening bolts only halfway.
Head Cap Bolt
Spring Washer
Flat Washer
Flat Washer
Spring Washer
Head Cap Bolt
Flat Washer
Spring Washer
Head Cap Bolt (short)
Left Unit
STEP 1
Attach Seat (C) to Back (B) with
Head Cap Bolts, Spring Washers and
Flat Washers, tightening bolts only halfway.
(See Figure 1)
Figure 1
C
B
A

Assembly Instructions /33
STEP 3
Tighten all bolts used in Steps 1 and 2.
Cover all Head Cap Bolts with Caps. (See Figure 2)
Turn unit to its upright position.
Cap
Figure 2

Hardware List
Part List
IMPORTANT
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
6730-604
RAF Loveseat
D.
Arm
1 pc.
L.
Back Cushion
2 pcs.
J.
Seat Cushion
1 pc.
E.
Back
1 pc.
F.
Seat
1 pc.
styles Customer Service: www.homestylesfurniture.com,home
[email protected], 888-680-7460
Small
Hex Wrench
1 pc.
Hex Wrench
1 pc.
Spring Washer
8 pcs. (+1 extra)
M6x35
Head Cap Bolt
6 pcs. (+1 extra)
M6x25
Head Cap Bolt (short)
2 pcs. (+1 extra)
Flat Washer
8 pcs. (+1 extra)
Cap
8 pcs. (+1 extra)

Assembly Instructions 2/3
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
Keep Hex Wrench as the bolts may need to be tightened in the future.
STEP 2
Attach Arm (D) to unit with
Head Cap Bolts, Head Cap Bolts (short),
Spring Washers and Flat Washers, tightening bolts only halfway.
Head Cap Bolt
Spring Washer
Flat Washer
Flat Washer
Spring Washer
Head Cap Bolt
Flat Washer
Spring Washer
Head Cap Bolt (short)
Right Unit
STEP 1
Attach Seat (F) to Back (E) with
Head Cap Bolts, Spring Washers and
Flat Washers, tightening bolts only halfway.
(See Figure 1)
Figure 1
E
F
D

Assembly Instructions /33
STEP 3
Tighten all bolts used in Steps 1 and 2.
Cover all Head Cap Bolts with Caps. (See Figure 2)
Turn unit to its upright position.
Cap
Figure 2

Hardware List
Part List
IMPORTANT
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
6730-12
Corner Chair
Cartons 6730-604 and 6730-605 are also needed for assembly.
G.
Side
1 pc.
K.
Seat Cushion
1 pc.
H.
Back
1 pc.
L.
Back Cushion
1 pc.
M.
Back Cushion
1 pc.
I.
Seat
1 pc.
styles Customer Service: www.homestylesfurniture.com,home
[email protected], 888-680-7460
Small
Hex Wrench
1 pc.
Hex Wrench
1 pc.
Spring Washer
6 pcs. (+1 extra)
M6x35
Head Cap Bolt
4 pcs. (+1 extra)
M6x25
Head Cap Bolt (short)
2 pcs. (+1 extra)
Flat Washer
6 pcs. (+1 extra)
Cap
6 pcs. (+1 extra)
Clip
6 pcs. (+1 extra)

Assembly Instructions 2/4
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
Keep Hex Wrench as the bolts may need to be tightened in the future.
Follow instructions in 6730-604, 605 cartons first, then proceed with Step 4.
Corner Unit
Head Cap Bolt
Spring Washer
Flat Washer
I
H
STEP 4
Attach Seat (I) to Back (H) with Head Cap Bolts,
Spring Washers and Flat Washers,
tightening bolts only halfway.
Head Cap Bolt (short)
Spring Washer
Flat Washer
Flat Washer
Spring Washer
Head Cap Bolt
G
STEP 5
Attach Side (G) to unit with
Head Cap Bolts, Head Cap Bolts (short),
Spring Washers and Flat Washers,
tightening bolts only halfway.
Tighten all bolts used.
Cover all Head Cap Bolts with Caps.
Turn unit to its upright position.

Assembly Instructions 3/4
STEP 6
Attach RAF Loveseat and LAF Loveseat to Corner Chair with 6 pcs. of clips.
Hold Seat Frames of left unit and right unit together.
Ensure the legs straight and there is no gap.
Squeeze adjoining frames tightly together & hook one of the arms (of the clip) on the backside of
the tube.
Spread the clip open by pushing it against and across the tubes so it captures both seat frames.
(See Figures 3, 4 and 5)
Note : Do not use a tool to force the clips on
Figure 3 Figure 4 Figure 5
Clip
Clip
Clip
LAF Loveseat
Corner Chair
RAF Loveseat

Assembly Instructions 4/4
J J
K
L
L
L
L
L
M
STEP 7
Slide Seat Cushions (J) and (K) into position.
Place Back Cushions (L) and (M) into position.