Home Styles 4528-95 User manual

4528-95
Kitchen Cart
IMPORTANT
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
A.
Top
1 pc.
E1.
Back Rail
1 pc.
E2.
Back Rail
1 pc.
I.
Front Rail
1 pc.
J.
Front Rail
1 pc.
L.
Base
1 pc.
K.
Divider
1 pc.
D.
Side Panel
1 pc.
C.
Middle Panel
1 pc.
F.
Back Upright
1 pc.
G.
Back Upright
2 pcs.
P.
Door
2 pcs.
O.
Door
2 pcs.
H.
Back Panel
4 pcs.
Q.
Drawer
2 pcs.
Refer to later page(s) of these
instructions for drawer assembly.
M.
Side Bar
2 pcs.
N.
Shelf
2 pcs.
B.
Side Panel
1 pc.
styles Customer Service: www.homestylesfurniture.com,home
[email protected], 888-680-7460
M4x16
Wood Screw
for Caster
16 pcs. (+1 extra)
Cross Dowel
7 pcs. (+1 extra)
Small Hex Wrench
1 pc.
Hex Wrench
1 pc.
M6x50
Head Cap Bolt (long)
7 pcs. (+1 extra)
M3.5x25
Wood Screw (long)
16 pcs. (+1 extra)
M3.5x16
Wood Screw (short)
12 pcs. (+1 extra)
Wood Plug
9 pcs. (+2 extra)
Adjustable Pin
8 pcs. (+1 extra)
Cam Lock
6 pcs. (+2 extra)
Cam Lock Screw
6 pcs. (+1 extra)
Handle
6 pcs.
Caster
2 Locking
2 Non-Locking
4 pcs.
M4x25
Machine Screw
12 pcs.
M6x35
Head Cap Bolt (short)
12 pcs. (+1 extra)
Hardware List
Part List
Tool(s) required for assembly: Phillips screwdriver

Assembly Instructions 2/7
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
Keep Hex Wrench as the bolts may need to be tightened in the future.
Figure 1
Figure 2
Head Cap Bolt (short)
Head Cap Bolt (short)
STEP 1
Attach Back Rail (E1) to Side Panel (B)
with Head Cap Bolt (short).
(See Figure 1)
Attach Back Uprights (F) and (G)
to unit.
Slide Back Panels (H) into position.
Attach Back Rail (E2) to unit with
Head Cap Bolt (short).
STEP 2
Attach Front Rail ( ) to unit with Head Cap Bolt (short).I
Attach Divider (K) to unit with Cross Dowel and
Head Cap Bolt (long). (See Figure 2)
Attach Front Rail (J) to unit with
Head Cap Bolt (short).
G
GF
HHH
H
E1
E2
B
K
J
I
Head Cap Bolt (long)
Cross Dowel

Assembly Instructions 3/7
Cross Dowel
Head Cap Bolt (long)
STEP 4
Attach Base (L) to unit with Cross Dowels
and Head Cap Bolts (long).
Note: Arrow label indicates front of Base (L).
STEP 3
Attach Middle Panel (C) to unit.
Attach Side Panel (D) to unit
with Head Cap Bolts (short).
Head Cap Bolt (short)
Arrow label at front
CD
L

Assembly Instructions 4/7
Figure 4
Head Cap Bolt (short)
Adjustable Pin
STEP 6
Turn unit over to its upright
position.
Attach Side Bars (M) to unit
with Head Cap Bolts (short).
Insert Adjustable Pins into
side panels and middle panel
at desired level. (See Figure 4)
Place Shelves (N) into position.
Figure 3
Wood Screw for Caster
Non-Locking Caster
Locking Caster
Arrow label at front
STEP 5
Attach Casters to unit with Wood Screws
for Caster into pre-drilled holes, with
Locking Casters at front. (See Figure 3)
Note: Arrow label indicates front of unit.
M
M
N
N

Machine Screw
Handle
STEP 7
Attach Doors (O) and (P)
by sliding door hinges
into side panel hinges.
(See Figure 5)
Attach Handles to Doors (O)
and (P) with Machine Screws.
(See Figure 6)
Figure 5 Figure 6
Assembly Instructions 5/7
STEP 8
Insert Cam Lock Screws into pre-drilled holes in
Top (A), then tighten. (See Figure 7)
Note: Arrow label indicates front of Top (A).
Arrow label at front
Cam Lock Screw
A
P
O
P
O
Figure 7

Part List
Assembly Instructions /67
Drawer (Q)
STEP 10
Slide Drawer Bottom (Q5) into groove.
Attach Drawer Bottom (Q5) to
unit with Wood Screws (short).
STEP 11
Attach Handle with Machine Screws.
Q1.
Drawer Front
2 pcs.
Q2.
Drawer Back
2 pcs.
Q3.
Drawer Side
2 pcs.
Q4.
Drawer Side
2 pcs.
Q5.
Drawer Bottom
2 pcs.
STEP 9
Attach Drawer Front (Q1) and Drawer
Back (Q2) to Drawer Side (Q3) with
Wood Screws (long).
Attach Drawer Side (Q4) to unit with
Wood Screws (long).
Q3
Q1
Q2 Q4
Q5
Machine Screw
Handle
Wood Screw (short)
Wood Screw (long)
Bottom
Roller at back
Bottom Bottom

Assembly Instructions /77
STEP 13
Cover all holes with Wood Plugs.
(See Figure 9)
Figure 9
Cam Lock
Wood Plug
STEP 12
Attach Top (A) to unit with Cam Locks.
(See Figure 8)
Slide Drawers (Q) into position.
Q
Q
A
Figure 8

NEVER
use glass cleaners on
finished furniture. Ammonia
chemically attacks the finish.
allow liquids to remain on furniture.
Absorption causes parts to warp
and split and finishes to delaminate.
NEVER
CARE INSTRUCTIONS
Do not use rubber
based placemats.
PREVENT
DISCOLORING
Do not use commercial
waxes and polishes.
PREVENT
YELLOWING
Do not place hot
objects on surface.
PREVENT
FINISH DAMAGE
Do not write
directly on surface.
PREVENT
MARKING
Do not use power tools
above 8 volts to assemble.
PREVENT
CRACKING
Do not place
in direct sunlight.
PREVENT
FADING
with a soft cloth moistened
in lukewarm soap and water.
Buff with a dry clean cloth.
CLEAN
homestyles will provide replacements free of charge for missing or damaged parts within 30 days of purchase.
Digital images of the defective parts may be required. If the product was not purchased from an authorized retailer,
homestyles is under no obligation to provide replacement parts. Parts are not available for fully assembled items nor
are parts available for sale. Replacements for missing or damaged parts may be requested via contact info below.
styles Customer Service: www.homestylesfurniture.com,home
[email protected], 888-680-7460