Home Styles 20 05502 0181 User manual

Hardware List
Part List
Home Styles Customer Service: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
Tool(s) required for assembly: Phillips screwdriver, Level
IMPORTANT
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
Pedestal Desk
20 05502 0181
Carton 20 05502 0182 is also needed for assembly.
D.
Side Panel
1 pc.
F.
Middle Panel
1 pc.
A.
Top
1 pc.
J.
Back Panel
2 pcs.
E.
Side Panel
1 pc.
G.
Middle Panel
1 pc.
Cam Lock Screw
45 pcs. (+1 extra)
Cam Lock
45 pcs. (+6 extra)
M3x12
Wood Screw
6 pcs. (+1 extra)
M3x25
Wood Screw (long)
56 pcs. (+1 extra)
M3x16
Wood Screw (short)
24 pcs. (+1 extra)
M4x32
Machine Screw
8 pcs.
Knob
6 pcs.
Handle
2 pcs.

Assembly Instructions 2/8
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
The unit must be level to work properly. Use the included adjustable levelers to level.
A
D
E
FG
B
B
Figure 1
Cam Lock Screw
J
J
STEP 1
Place Top (A), Bases (B), Side Panels (D), (E), Middle Panels (F), (G),
and Back Panels (J) on a soft cloth.
Insert Cam Lock Screws into pre-drilled holes in Top (A), Bases (B),
Side Panels (D), (E), Middle Panels (F), (G), and Back Panels (J),
then tighten. (See Figure 1)

Assembly Instructions 3/8
STEP 2
Attach Feet (C) to Bases (B).
Turn units over to their
upright position. C
B
B
C
C
C
CC
C
C
STEP 3
Attach Middle Panel (F) to Back Panel (J)
with Cam Locks. (See Figure 2)
Attach Rails (H) to unit with Cam Locks.
Attach Side Panel (D) to unit with Cam Locks.
D
F
J
H
H
Cam Lock
STEP 4
Attach unit from Step 3 to unit
from Step 2 with Cam Locks.
Figure 2
Cam Lock

Assembly Instructions 4/8
G
J
I
I
E
STEP 5
Attach Middle Panel (G) to Back Panel (J)
with Cam Locks.
Attach Rails (I) to unit with Cam Locks.
Attach Side Panel (E) to unit with Cam Locks.
Cam Lock
STEP 6
Attach unit from Step 5 to unit
from Step 2 with Cam Locks.
K
Left Unit Right Unit
STEP 7
Attach Left Unit and Right Unit
to Back Panel (K) with Cam Locks.
Cam Lock
Cam Lock

Assembly Instructions 5/8
Figure 3
A
STEP 8
Attach Top (A) to unit with Cam Locks.
Level unit by adjusting the adjustable levelers on bottom of unit.
(See Figure 3)
Note: Unit must be level to proceed.
Cam Lock
N
O
Wood Screw Machine Screw
STEP 9
Attach Keyboard Front (O) to Keyboard (N) with Wood Screws.
(See Figure 4)
Attach Knobs to keyboard with Machine Screws. Figure 4
Knob

Assembly Instructions 6/8
Part List
L1.
Drawer Front
4 pcs.
L2.
Drawer Back
4 pcs.
L3.
Drawer Side
4 pcs.
L4.
Drawer Side
4 pcs.
L5.
Drawer Bottom
4 pcs.
Part List
STEP 12
Attach Knob with Machine Screw.
Drawer (L)
STEP 10
Attach Drawer Front (L1) and
Drawer Back (L2) to Drawer Side (L3)
with Wood Screws (long).
Attach Drawer Side (L4) to unit
with Wood Screws (long).
Roller at back
L1
L2
L3
L4
Bottom
Wood Screw (long)
L5
Machine Screw
Knob
STEP 11
Slide Drawer Bottom (L5) into groove.
Attach Drawer Bottom (L5) to
unit with Wood Screws (short).
Wood Screw (short)

Assembly Instructions 7/8
M1.
Drawer Front
2 pcs.
M2.
Drawer Back
2 pcs.
M3.
Drawer Side
2 pcs.
M4.
Drawer Side
2 pcs.
L5.
Drawer Bottom
2 pcs.
Part ListPart List
STEP 15
Attach Handle with Machine Screw.
Wood Screw (short)
STEP 16
Place Metal Strips (P) into position.
Metal Strips (P) can be adjusted
for letter or legal files.
Legal Size
Letter Size
P
Machine Screw
Handle
STEP 13
Attach Drawer Front (M1) and
Drawer Back (M2) to Drawer Side (M3)
with Wood Screws (long).
Attach Drawer Side (M4) to unit
with Wood Screws (long).
Drawer (M)
L5
M1
M2
M3
M4
Bottom
Wood Screw (long)
STEP 14
Slide Drawer Bottom (L5) into groove.
Attach Drawer Bottom (L5) to
unit with Wood Screws (short).

Assembly Instructions 8/8
STEP 17
Slide Drawers (L), (M) and keyboard into position.
Note: To remove Drawers (M) and keyboard in future, push plastic lever on left side up, push
plastic lever on right side down and pull open. (See Figures 5 and 6)
Figure 6
Figure 5
Left Side Right Side
L
M
LL
M
L

NEVER
use glass cleaners on
finished furniture. Ammonia
chemically attacks the finish.
allow liquids to remain on furniture.
Absorption causes parts to warp
and split and finishes to delaminate.
NEVER
CARE INSTRUCTIONS
Do not use rubber
based placemats.
PREVENT
DISCOLORING
Do not use commercial
waxes and polishes.
PREVENT
YELLOWING
Do not place hot
objects on surface.
PREVENT
FINISH DAMAGE
Do not write
directly on surface.
PREVENT
MARKING
Do not use power tools
above 8 volts to assemble.
PREVENT
CRACKING
Do not place
in direct sunlight.
PREVENT
FADING
with a soft cloth moistened
in lukewarm soap and water.
Buff with a dry clean cloth.
CLEAN
Home Styles will provide replacements free of charge for missing or damaged hardware or parts within 30 days of
purchase. Digital images of the defective parts may be required. If the product was not purchased from an authorized
retail affiliate, Home Styles is under no obligation to provide replacement parts. Parts are not available for fully assembled
items nor are parts available for sale. Replacements for missing or damaged hardware or parts may be requested at:
www.homestyles-furniture.com/customer-service/replacement-parts
Home Styles Customer Service: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319