Home Styles Orleans Grey 88 5760 103 User manual

Hardware List
Hex Wrench
1 pc.
Head Cap Bolt
(short)
8 pcs. (+1 extra)
Small
Hex Wrench
1 pc.
Part List
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
D.
Shelf
2 pcs.
A.
Top
1 pc.
C.
Side Frame
1 pc.
B.
Side Frame
1 pc.
Spring Washer
8 pcs. (+1 extra)
Flat Washer
8 pcs. (+1 extra)
Head Cap Bolt
8 pcs. (+1 extra)
Tools required for assembly : Tools recommended for assembly :Phillips screwdriver Level
Home Styles Consumer Assistance: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
88 5760 103
The Orleans 3 Tier Tower

Assembly Instructions 2/2
STEP 2
Attach Side Frame (B) and (C)
to Top (A) with Head Cap Bolt (short).
(See Figure 1)
STEP 1
IMPORTANT
* Do not tighten up all the screws until each part is properly assembled.
* You should keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* After assembly, item must be level to work properly. Use the included adjustable levelers to level.
Figure 1
Head Cap Bolt
(short)
STEP 3
Attach Shelves (D) to unit
with Flat Washers, Spring
Washers and Head Cap Bolts.
(See Figure 2)
Figure 2
Figure 3
Note: Unit must be level
to work properly.
Flat Washer
Spring Washer
Head Cap Bolt
B
C
D
D
A
Turn the unit over to its’ upright position.
To level the unit, adjust the adjustable
levelers on the bottom of unit.
(See Figure 3)