Home Styles Bermuda Hall Tree 88 5542 49 User manual

Part List
Hardware List
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the wood parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Cam Lock Screw
30 pcs.(+1 extra)
88 5542 49
Bermuda Hall Tree
Hex Wrench
1 pc.
Wood Screw
for Side Panel
4 pcs. (+1 extra)
Small
Hex Wrench
1 pc.
Tools required for assembly : Tools recommended for assembly :Phillips screwdriver Level
Home Styles Consumer Assistance: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
E.
Middle Panel
1 pc.
U.
Door
1 pc.
Hook
4 pcs.
Machine Screw
2 pcs.
Wood Screw
for Back Panel
24 pcs. (+1 extra)
A.
Top
1 pc.
B.
Shelf
1 pc.
G.
Seat
1 pc.
H.
Bottom
1 pc.
J.
Front Rail
1 pc.
O.
Back Rail
1 pc.
P.
Back Panel
1 pc.
T.
Side Panel
1 pc.
D.
Side Panel
1 pc.
F.
Leg
4 pcs.
K.
Back Rail
2 pcs.
L.
Back Rail
1 pc.
N.
Back Rail
1 pc.
M.
Back Panel
1 pc.
Q.
Back Panel
2 pcs.
C.
Side Panel
1 pc.
S.
Side Panel
1 pc.
R.
Back Post
1 pc.
V.
Door
1 pc.
Wood Screw
for Hinge
8 pcs. (+1 extra)
Pull Handle
2 pcs.
Cam Lock
30 pcs.(+1 extra)
Wood Screw
for Hook
8 pcs. (+1 extra)
I.
Front Rail
1 pc.

Assembly Instructions 2/6
IMPORTANT
* Do not tighten up all the screws until each part is properly assembled.
* You should keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* After assembly, item must be level to work properly. Use the included adjustable levelers to level.
* Use a soft cloth between these parts and the floor.
Cam Lock Screw
STEP 2
Attach Legs (F) to Bottom (H).
(see Figure 2)
Figure 2
STEP 1
Insert Cam Lock Screws into the
pre-drilled holes of Top (A), Seat (G),
Bottom (H), Side Panel (C), (D), (S) and (T).
(see Figure 1)
Figure 1
A
H
T
S
C
D
F
G
H
F
F
F

STEP 4
Assembly Instructions 3/6
Place unit from Step 3 onto Bottom unit using Cam Locks.
Cam Lock
Figure 3
I
K
M
K
C
D
STEP 3
Attach Front Rail (I), Back Rails (K) to Side Panel (C) using Cam
Locks and slide Back Panel (M) into place. (see Figure 3)
Attach Side Panel (D) to unit using Cam Locks.
Cam Lock

Assembly Instructions 4/6
STEP 5
Attach Back Rail (L), (N) to Side
panel (T) using Cam Locks and slide
Back Panel (P) into place.
Slide Back Panels (Q) and Back
Post (R) into Back Rail (N).
Attach Back Rail (O) to the unit using
Cam Lock.
STEP 6
Attach Shelf (B), Front Rail (J) to
unit using Cam Locks.
Slide Middle Panel (E) into place.
Attach Side Panel (S) to unit using
Cam Locks.
STEP 7
Place Top (A) onto unit using Cam
Locks.
Attach Seat (G) to unit with Wood
Screw for Side Panel.
(see Figure 4)
P
N
Q
R
Q
E
T
L
O
A
S
J
Figure 4
G
B
Cam Lock
Wood Screw for
Side Panel
Cam Lock
Cam Lock

Assembly Instructions 5/6
Figure 5
STEP 8
Insert 24X Wood Screws from the back of the unit
and then tighten up all the Wood Screws.
(see Figure 5)
Note: Please make sure unit is level before
tightening these screws.
Place the Top unit onto the Base Unit using
Cam Locks.
STEP 9
To level the unit, adjust the adjustable levelers
on the bottom of unit. (see Figure 6)
Figure 6
Cam Lock
Wood Screw for
Back Panel

Assembly Instructions 6/6
STEP 6
Figure 8 Figure 9
Figure 7
V
U
Attach Hooks to the unit with Wood Screw for Hooks. (see Figure 7)
Attach Doors (U) and (V) to the Base unit with Wood Screws for Hinges. (see Figure 8)
Attach Pull Handles to Doors (U) and (V) with Machine Screws. (see Figure 9)
Wood Screw for
Hook
Wood Screw for
Hinge
Hook