Home Styles Xcel 88 5079 15 User manual

Part List
Hardware List
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the wood parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Home Styles Consumer Assistance: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
Spring Washer
18 pcs.(+1 extra)
Flat Washer
18 pcs.(+1 extra)
A.
Top
1 pc.
B.
Side Frame
.1 pc
C.
Side Frame
1 pc.
D.
Front Rail
.1 pc
F.
Back Frame
.1 pc
E.
Stretcher
.1 pc
G.
Stretcher
.1 pc
M6x38
Head Cap Bolt (long)
4 pcs.(+1 extra)
M6x16
Head Cap Bolt
18 pcs.(+1 extra)
Tools required for assembly : Level
Hex Wrench
1 pc.
Small
Hex Wrench
1 pc.
88 5079 15
Office Desk

STEP 1
STEP 2
Assembly Instructions 2/3
Attach Front Rail (D), Stretchers (E), and (G) to Side Frame (B) with
Head Cap Bolts, Spring Washers and Flat Washers. (See Figure 1)
Attach Back Frame (F) to unit with Head Cap Bolts (long).
Attach Side Frame (C) to
unit with Head Cap Bolts (long),
Head Cap Bolts, Spring Washers and Flat Washers.
Head Cap Bolt (long)
IMPORTANT
* Do not tighten up all the Head Cap Bolts until each part is properly assembled.
* You should keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* Use a soft cloth between these parts and the floor.
* After assembly, item must be level to work properly. Use the included adjustable levelers to level.
B
D
E
C
F
G
Figure 1

STEP 3
STEP 4
Assembly Instructions 3/3
Turn the unit to its’ upright position.
To level the unit, adjust the adjustable levelers on the bottom of side frames. (See Figure 2)
Note : Unit must be level to work properly.
Put Top (A) upside down on a soft cloth.
Attach Top (A) to unit with Head Cap Bolts,
Spring Washers and Flat Washers.
Figure 2
A