Home Styles Xcel 88 5079 01 User manual

Part List
Hardware List
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the wood parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
88 5079 01
Mobile File
Home Styles Consumer Assistance: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
D.
Base
1 pc.
A.
Top
1 pc.
B.
Front Panel
.1 pc
C.
Back Panel
1 pc.
E.
Side Panel
1 pc.
F.
Side Panel
1 pc.
H.
Bottom
1 pc.
I.
Hanger
2 pcs.
M3x16
Wood Screw
10 pcs.(+1 extra)
Support
1 pc.
Tools required for assembly : Phillips screwdriver
G.
Divider
1 pc.
M3.5x16
Wood Screw
for Caster
16 pcs.(+1 extra)
Hex Wrench
1 pc.
Small
Hex Wrench
1 pc.
M6x25
Head Cap Bolt
6 pcs.(+1 extra)
Caster
2 Locking
2 Non Lock
4 pcs.

STEP 1
STEP 2
Assembly Instructions 2/4
Attach Support to Side Panel (E) with Wood Screws
into the pre-drilled holes. (See Figure 1)
Attach Base (D) and Side Panel (E)
to Back Panel (C), then flip the Locks.
(See Figures 2 and 3)
D
E
Figure 2
Figure 1
Figure 3
C
Attach Divider (G) to unit,
then flip the Locks.
Slide Bottom (H) into position.
Wood Screw
IMPORTANT
* Do not tighten all the Head Cap Bolts until the entire unit is properly assembled.
* You should keep Hex Wrench in a safe place as you may need to tighten the
Head Cap Bolts in the future.
* Use a soft cloth between these parts and the floor.
G
H

STEP 4
STEP 3
Assembly Instructions 3/4
Turn unit upside down.
Attach Head Cap Bolts to unit.
Attach Side Panel (F) and
Front Panel (B) to unit,
then flip the Locks.
B
F
Head Cap Bolt

‘Arrow’ Sticker
Locking Caster
Assembly Instructions 4/4
STEP 5
STEP 6
Wood Screw
Wood Screw
(for Caster)
Hanger
Turn unit to its’ upright position.
Attach Top (A) to unit with
Wood Screws into the pre-drilled holes.
Slide Hangers (I) into place.
You can adjust the Hanger
for letter size or legal size files.
(See Figure 5)
Figure 5
A
II
Attach Casters to unit with Wood Screws
(for Caster), putting the Locking Casters
at the front as indicated by ‘Arrow’ sticker.
(See Figure 4)
Figure 4