Home Styles Kitchen Cart User manual

Hardware List
Part List
Home Styles Customer Service: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
Tool(s) required for assembly: Phillips screwdriver
88 4528 95
Kitchen Cart
IMPORTANT
Hex Wrench
1 pc.
Small Hex Wrench
1 pc.
M6x35
Head Cap Bolt (short)
12 pcs. (+1 extra)
M6x50
Head Cap Bolt (long)
7 pcs. (+1 extra)
Refer to later page(s) of these
instructions for drawer assembly.
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
Caster
2 Locking
2 Non-Locking
4 pcs.
Cam Lock
6 pcs. (+2 extra)
M4x16
Wood Screw
for Caster
16 pcs. (+1 extra)
Cam Lock Screw
6 pcs. (+1 extra)
Wood Plug
9 pcs. (+1 extra)
Cross Dowel
7 pcs. (+1 extra)
Adjustable Pin
8 pcs. (+1 extra)
M3.5x25
Wood Screw (long)
16 pcs. (+1 extra)
M3.5x16
Wood Screw (short)
12 pcs. (+1 extra)
Pull Handle
6 pcs.
Q.
Drawer
2 pcs.
K.
Divider
1 pc.
P.
Door
2 pcs.
J.
Front Piece
1 pc.
E2.
Back Stretcher
1 pc.
E1.
Back Stretcher
1 pc.
D.
Side Panel
1 pc.
C.
Middle Panel
1 pc.
B.
Side Panel
1 pc.
A.
Top
1 pc.
I.
Front Piece
1 pc.
F.
Back Piece
1 pc.
G.
Back Piece
2 pcs.
H.
Back Panel
4 pcs.
O.
Door
2 pcs.
N.
Shelf
2 pcs.
M.
Side Bar
2 pcs.
L.
Base
1 pc.
M4x25
Machine Screw
12 pcs.

Assembly Instructions 2/6
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
Keep Hex Wrench in a safe place as the bolts may need to be tightened up in the future.
STEP 2
Attach Back Stretcher (E2) to Side Panel (B) with Head Cap Bolt (short). (See Figure 2)
Attach Back Pieces (F) and (G) to Back Stretcher (E2), then slide Back Panels (H) into place.
Attach Back Stretcher (E1) and Front Pieces (I) and (J) to unit with Head Cap Bolts (short).
Figure 2
I
J
B
H
H
H
H
F
G
G
E2
E1
Figure 1
Head Cap Bolt (short)
STEP 1
Attach Casters underneath Base (L) with
Wood Screws for Caster, with Locking
Casters on the front. (See Figure 1)
Note: The ‘Arrow’ sticker indicates
the front of Base (L). L
Wood Screw for Caster
Locking Caster
Non-Locking Caster
‘Arrow’ sticker at front

Assembly Instructions 3/6
Head Cap Bolt (short)
D
CI
J
K
F
Figure 3
Cross Dowel
Head Cap Bolt (long)
L
STEP 3
Attach Divider (K) in between Front Pieces (I) and (J).
Attach Middle Panel (C) to Back Piece (F).
Attach Side Panel (D) to the with Head Cap Bolts (short).
STEP 4
Attach Base (L) to unit with Head Cap Bolts (long)
and Cross Dowels. (See Figure 3)
‘Arrow’ sticker at front

STEP 6
Turn the unit to its’ upright position.
Attach Side Bars (M) to unit with Head Cap Bolts (short).
Insert a Cross Dowel into the pre-drilled hole in Divider (K)
and tighten Head Cap Bolt (long) from the back of unit.
Attach Top (A) to unit with Cam Locks.
Note: The ‘Arrow’ sticker indicates the front of Top (A).
Insert Adjustable Pins into the side panels and middle panel at the desired level.
Place Shelves (N) into position.
A
Cam Lock
Head Cap Bolt (short)
Head Cap Bolt (long)
M
M
N
N
K
Adjustable Pin
Cross Dowel
Assembly Instructions 4/6
STEP 5
Insert Cam Lock Screws into
the pre-drilled holes of Top (A).
A
Cam Lock Screw
‘Arrow’ sticker at front

Part List
Assembly Instructions 5/6
Q1.
Drawer Front
2 pcs.
Q2.
Drawer Back
2 pcs.
Q3.
Drawer Side
2 pcs.
Q4.
Drawer Side
2 pcs.
Q5.
Drawer Bottom
2 pcs.
Drawer (Q)
STEP 7
Attach Drawer Front (Q1) and Drawer
Back (Q2) to Drawer Side (Q3) with
Wood Screws (long).
Attach Drawer Side (Q4) to unit with
Wood Screws (long).
STEP 8
Slide Drawer Bottom (Q5) into the grooves
of Drawer Sides (Q3) and (Q4) until it meets
Drawer Front (Q1).
Attach Drawer Bottom (Q5) to unit with
Wood Screws (short).
STEP 9
Attach Pull Handle with Machine Screws.
Bottom
Q3
Q1
Q2 Q4
Q3
Q1
Q5
Q4
Roller at back

Assembly Instructions 6/6
Wood Plug
QQ
O
O
P
P
STEP 10
Attach Pull Handles to Doors (O) and (P) with Machine Screws.
(See Figure 4)
Attach Doors (O) and (P) to the side panels and middle panel
by sliding the door lift hinges into the side panel and middle
panel lift hinges. (See Figure 5)
Slide Drawers (Q) into place.
Cover all holes with Wood Plugs.
(See Figure 6)
Figure 4 Figure 5 Figure 6

NEVER
use glass cleaners on
finished furniture. Ammonia
chemically attacks the finish.
allow liquids to remain on furniture.
Absorption causes parts to warp
and split and finishes to delaminate.
NEVER
CARE INSTRUCTIONS
Do not use rubber
based placemats.
PREVENT
DISCOLORING
Do not use commercial
waxes and polishes.
PREVENT
YELLOWING
Do not place hot
objects on surface.
PREVENT
FINISH DAMAGE
Do not write
directly on surface.
PREVENT
MARKING
Do not use power tools
above 8 volts to assemble.
PREVENT
CRACKING
Do not place
in direct sunlight.
PREVENT
FADING
with a soft cloth moistened
in lukewarm soap and water.
Buff with a dry clean cloth.
CLEAN
Home Styles will provide replacements free of charge for missing or damaged hardware or parts within 30 days of
purchase. Digital images of the defective parts may be required. If the product was not purchased from an authorized
retail affiliate, Home Styles is under no obligation to provide replacement parts. Parts are not available for fully assembled
items nor are parts available for sale. Replacements for missing or damaged hardware or parts may be requested at:
www.homestyles-furniture.com/customer-service/replacement-parts
Home Styles Customer Service: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319