Home Styles Bermuda 88 5543 09 User manual

Part List
Hardware List
E.
Base
1 pc.
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
A.
Top
1 pc.
H.
Plinth
1 pc.
Tools required for assembly : Phillips screwdriver
88 5543 09
Bermuda
Entertainment Console
F.
Shelf
4 pcs.
G.
Shelf
2 pcs.
Cam Lock
19 pcs.(+4 extra)
Cam Lock Screw
19 pcs.(+1 extra)
Adjustable Pin
24 pcs.(+1 extra)
Pull Handle
2 pcs.
Machine Screw
2 pcs.
Magnet
2 pcs.
Wood Screw
for Magnet
4 pcs.(+1 extra)
Wood Screw
for Back Panel
12 pcs.(+1 extra)
Tools recommended for assembly :Level
B.
Side Panel
.1 pc
C.
Side Panel
1 pc.
D1.
Middle Panel
.1 pc
I.
Back Panel
2 pcs.
J.
Back Panel
1 pc.
K.
Door
1 pc.
L.
Door
1 pc.
M.
Leg
4 pcs.
D2.
Middle Panel
.1 pc
Home Styles Consumer Assistance: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
Wood Screw
for Wood Block
12 pcs.(+1 extra)
N.
Wood Block
4 pcs.

E
Cam Lock Screw
Wood Screw
for Wood Block
Wood Block
Wood Screw
for Wood Block
Wood Block
STEP 1
Assembly Instructions 2/4
A
IMPORTANT
* Do not tighten up all the screws until each part is properly assembled.
* After assembly, item must be level to work properly. Use the included adjustable levelers to level.
B
C
E
H
Attach 2X Wood Blocks (N) to Top (A) and Base (E) by using Wood Screws for Wood Block into
the pre-drilled holes.
Attach 2X Magnets to Top (A) by using Wood Screws in the pre-drilled holes.
Insert Cam Lock Screws into the pre-drilled holes of Top (A), Side Panel (B), (C),
Base (E) and Plinth (H).
* Use a soft cloth between these parts and the floor.
Wood Screw
Magnet
N
N
N
N

Assembly Instructions 3/4
Figure 1
STEP 2
Attach Middle Panels (D1) and (D2)
onto Base (E) with Cam Locks.
(see Figure 1)
STEP 3
Attach Plinth (H) to Base (E)
with Cam Locks.
Attach Side Panel (B) and (C)
to unit with Cam Locks.
(see Figure 1)
STEP 4
Attach Legs (M)
into the pre-drilled holes
of unit and tighten.
E
H
C
B
M
M
M
M
Cam Lock
E
D1 D2
Cam Lock

Assembly Instructions 4/4
Insert 12X Wood Screws from
the back of the unit,
tighten up all the Wood Screws.
STEP 6
Place Top (A) onto unit with Cam Locks.
Insert Adjustable Pins into
side panels and middle panels at the desired level (see Figure 4),
then place Shelves (F) and (G) into position.
To level the unit,
adjust the adjustable levelers on
the bottom of legs. (see Figure 5)
Figure 4
Figure 2
Figure 3
Figure 5 Note: Please make sure unit is level before tightening these screws.
Slide Back Panels (I) and (J)
into place.
Attach Doors (K) and (L)
by sliding the door lift hinges
into the side panels lift hinges.
(see Figure 2)
Assemble Pull Handles to
Doors (K) and (L) with Machine Screws.
(see Figure 3)
STEP 5
K
L
I
J
I
A
F
F
G
G
F
F
Cam Lock
Adjustable Pin
STEP 7
Wood Screw