Home Styles 88 5531 752 User manual

Hardware List
Part List
Home Styles Customer Service: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
Tool(s) required for assembly: Phillips screwdriver, Level, Drill (8 volts or less), 3/8” Drill Bit
88 5531 752
Closet Wall Drawer Unit
IMPORTANT
I.
Plinth
1 pc.
N.
Front Rail
2 pc.
H.
Front Rail
1 pc.
L.
Back Panel
1 pc.
M.
Bottom
1 pc.
Refer to the last page(s) of these
Instructions for drawer assembly.
O.
Drawer
3 pcs.
M4x15
Machine Screw
3 pcs.
Adjustable Pin
12 pcs. (+1 extra)
Knob
3 pcs.
J.
Side Panel
1 pc.
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
Carton 88 5531 751 is also needed for assembly.
M3x19
Wood Screw for
Leveler
16 pcs. (+1 extra)
Connector
2 pcs.
Leveler
4 pcs.
Plug
4 pcs. (+1 extra)
Hex Wrench
1 pc.
M3x15
Wood Screw for
Connector
8 pcs. (+1 extra)
M3x25
Wood Screw (long)
10 pcs. (+1 extra)
G.
Top
1 pc.
K.
Side Panel
1 pc.

Assembly Instructions 2/8
STEP 2
Attach unit to Side
Panel (K), then flip the locks.
Attach Back Panel (L) to
unit, then flip the locks.
Attach Front Rails (H) and (N)
to unit with Wood Screws (long).
Attach Side Panel (J) to unit with
Wood Screws (long), then flip
the locks.
J
H
N
N
M
I
L
Figure 1
STEP 1
PlinthAttach (I) to Bottom (M), then flip the lock. (See Figure 1)
K
Wood Screw (long)
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
The unit must be level to work properly. Use the included adjustable levelers to level.
Keep Hex Wrench in a safe place as the bolts may need to be tightened up in the future.

Assembly Instructions 3/8
Wood Screw (long)
G
Figure 2
STEP 3
Attach Levelers to bottom of unit
with Wood Screws for Levelers.
(See Figure 2)
Leveler
Wood Screw for Leveler
STEP 4
Attach Top (G) to unit with Wood
Screws (long), then flip the locks.

Assembly Instructions 4/8
STEP 5
Attach Back Panel (F) and
Front Rail (B) to Side Panel (E),
then flip the locks.
Attach Side Panel (D) to unit,
then flip the locks.
A
D
F
B
E
STEP 6
Attach Top (A) to unit, then flip the locks.

Assembly Instructions 5/8
C
C
O
C
O
O
Adjustable Pin
STEP 7
Place top unit onto
base unit, then flip
the locks.
Figure 4
STEP 8
Place unit at desired location.
Note: If assembling multiple Closet Wall Units together, place all units at
desired location.
Level the unit(s) by adjusting the adjustable levelers on the bottom of unit(s).
(See Figure 3)
Note: Unit(s) must be level to proceed.
Cover all holes with Plugs. (See Figure 4)
Insert the Adjustable Pins into the side panels at the desired level and place
Shelves (C) into position.
Slide Drawers (O) into position.
Figure 3
Plug

Assembly Instructions 6/8
Drill 3/8” hole in wall
Top of unit
Hardware List
STEP 9
Drill a 3/8” hole in wall in-line with
the pre-drilled hole at top of unit.
Move unit.
Insert Anchor into the wall hole
and attach Bracket with Wall Screw.
Attach Bracket at pre-drilled hole
at top of unit with Wood Screw.
Move unit back into place.
If assembling multiple Closet Wall Units
together, go to and complete Step 10 now,
then return to and complete Step 9.
Slide Tipover Restraint through
Bracket on wall and Bracket on unit.
(See Figure 5)
Put tie end of Tipover Restraint into lock
end of Tipover Restraint and pull until tight.
Anchor
1 pc. (+1 extra)
Bracket
2 pcs. (+1 extra)
Tipover Restraint
1 pc. (+1 extra)
M3.5x40
Wall Screw
1 pc. (+1 extra)
M3.5x16
Wood Screw
1 pc. (+1 extra)
Figure 5
Wood Screw
Wall Screw
Bracket
on wall
Anchor in wall
3/8” wall hole
Pre-drilled hole
at top of unit
Tie end
Lock end
Bracket at
top of unit
Tipover
Restraint
IMPORTANT
To help reduce the risk of the unit tipping over, the Tipover Restraint must be installed following these instructions exactly.
Pre-drilled hole
at top of unit

Assembly Instructions 7/8
STEP 10
Note: If assembling multiple Closet Wall Units together, complete Step 10.
Attach the top of units together using Connector and Wood Screw for Connectors into the
pre-drilled holes. (See Figure 6)
Return to and complete Step 9.
Figure 6
Wood Screw for Connector
Connector

Part List
Assembly Instructions 8/8
STEP 1
Attach O2 to O3 and O4, then flip the locks.
(See Figure A)
STEP 2
Slide O5 into the grooves in O3
and O4. Be sure to push O5 all
the way forward so it meets O2.
STEP 3
Attach O1 to unit, then flip the locks.
STEP 4
Attach Knob with
machine screw.
Figure 2
O2
O4
O5
O1
O1.
Drawer Front
3 pcs.
O2.
Drawer Back
3 pcs.
O3.
Drawer Side
3 pcs.
O4.
Drawer Side
3 pcs.
O5.
Drawer Bottom
3 pcs.
Drawer (O)
O3
O2

NEVER
use glass cleaners on
finished furniture. Ammonia
chemically attacks the finish.
allow liquids to remain on furniture.
Absorption causes parts to warp
and split and finishes to delaminate.
NEVER
CARE INSTRUCTIONS
Do not use rubber
based placemats.
PREVENT
DISCOLORING
Do not use commercial
waxes and polishes.
PREVENT
YELLOWING
Do not place hot
objects on surface.
PREVENT
FINISH DAMAGE
Do not write
directly on surface.
PREVENT
MARKING
Do not use power tools
above 8 volts to assemble.
PREVENT
CRACKING
Do not place
in direct sunlight.
PREVENT
FADING
with a soft cloth moistened
in lukewarm soap and water.
Buff with a dry clean cloth.
CLEAN
Home Styles will provide replacements free of charge for missing or damaged hardware or parts within 30 days of
purchase. Digital images of the defective parts may be required. If the product was not purchased from an authorized
retail affiliate, Home Styles is under no obligation to provide replacement parts. Parts are not available for fully assembled
items nor are parts available for sale. Replacements for missing or damaged hardware or parts may be requested at:
www.homestyles-furniture.com/customer-service/replacement-parts
Home Styles Customer Service: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319