Home Styles Bermuda 88 5588 941 User manual

Home Styles ConsumerAssistance: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
Part List
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the wood parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
88 5588 941
Bermuda
Kitchen Island
For assembly see instructions in carton 88 5588-942
A1.
Top
1 pc.
A2.
Leaf Top
1 pc.

Home Styles ConsumerAssistance: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
Tools required for assembly : Phillips screwdriver Tools recommended for assembly : Level
Part List
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the wood parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
88 5588 942
Bermuda
Kitchen Island
For assembly also need the following : 88 5588 941, 88 5588 943
Hardware List
D.
Middle Panel
1 pc.
(Knock-Down Construction
refer of the last page
of instruction for steps to
complete drawer assembly)
H.
Shelf
2 pcs.
C.
Side Panel
1 pc.
E.
Side Panel
1 pc.
F.
Door
1 pc.
G.
Door
1 pc.
A1.
Top
1 pc.
I.
Front Rail
1 pc.
J.
Front Rail
1 pc.
K.
Back Rail
1 pc.
88 5588 943 Bermuda Kitchen Island Carton quatity: 1
M.
Back Piece
1 pc.
N.
Back Panel
2 pcs.
O.
Post
2 pcs.
P.
Wood Support
1 pc.
Q.
Drawer
2 pcs.
Adjustable Pin
8 pcs. (+1 extra)
88 5588 941 Bermuda Kitchen Island Carton quatity: 1
A1
.
T
o
p
B.
Bottom
1 pc.
A2.
Leaf Top
1 pc.
L.
Back Rail
1 pc.
Hex Wrench
1 pc.
Small
Hex Wrench
1 pc.
Flat Washer
18 pcs. (+1 extra)
Cam Lock
19 pcs. (+4 extra) Wood Screw
(short)
12 pcs. (+1 extra)
Wood Screw for
Hinge
36 pcs. (+1 extra)
Hinge
4 pcs.
Machine Screw
4 pcs.
Wood Screw
(long)
16 pc. (+1 extra)
S.
Side Frame
1 pc.
R.
Side Frame
1 pc.
Cam Lock Screw
19 pcs. (+1 extra)
Pull Handle
4 pcs.
Head Cap Bolt
18 pcs. (+1 extra) Wood Dowel
2 pcs. (+1 extra) Spring Washer
18 pcs. (+1 extra)

Home Styles ConsumerAssistance: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
Part List
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the wood parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
88 5588 943
Bermuda
Kitchen Island
For assembly see instructions in carton 88 5588-942
S.
Side Frame
1 pc.
R.
Side Frame
1 pc.

IMPORTANT
* Do not tighten up all the screws until each part is properly assembled.
* You should keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* Use a soft cloth between these parts and the floor.
*After assembly, item must be level to work properly. Use the included adjustable levelers to level.
B
I
E
P
K
STEP 1
Insert Cam Lock Screws into the pre-drilled holes of Bottom (B), Side
Panel (C), (E), Front Rail (I), (J) and Back Rail (L). (see Figure 1)
Cam Lock Screw
Flat Washer
Cam Lock Screw
STEP 2
Attach Wood Support (P) to the Back Rail (K)
with Flat Washers, Spring Washers and Head
Cap Bolts.
Insert Cam Lock Screw into the pre-drilled
holes of Back Rail (K).
L
C
Figure 1
Assembly Instruction 2 / 7
K
Head Cap Bolt
Spring Washer
B
I
C
am Lo
c
J

STEP 3
Attach Front Rail (I), (J), Bottom (B) and
Back Rail (K) to Middle Panel (D) using
Cam Locks. (see Figure 2)
Attach Back Piece (M) and Back Rail (L)
to unit using Cam Locks.
Slide Back Panel (N) into the grooves in
Back Rail (K), (L) and Back Piece (M).
Assembly Instruction 3 / 7
STEP 5
Attach Side Frame (R), (S) and Posts (O) to unit
with Flat Washers, Spring Washers and Head
Cap Bolts. (see Figure 3)
N
Figure 2
K
D
J
O
N
ML
I
E
C
STEP 4
Attach Side Panel (C) and (E) to unit
using Cam Locks.
Head Cap Bolt
Figure 3
B
O
R
Cam Lock
Flat Washer
Spring Washer
S
Cam Lock

Assembly Instruction 4 / 7
STEP 7
Attach Top (A1) to Leaf Top (A2) with Wood Screws for Hinges into the pre-drilled holes.
(see Figure 6)
Figure 6
STEP 6
Attach Hinges, Pull Handles to Doors (F), (G) with Wood Screws and Machine Screws into the
pre-drilled holes. (see Figure 4), (see Figure 5)
Figure 4 Figure 5
EP 6
F
G
Hinge
Machine Screw
Wood Screw for Hinge
Pull Handle
A1
A2
Wood Screw for Hinge

Wood Dowel
Assembly Instruction 5 / 7
STEP 8
Insert Wood Dowels into the unit.
Place top unit onto unit and attach with Flat Washers, Spring Washers and Head Cap Bolts.
(see Figure 7)
Attach Door (F), (G) to unit with Wood Screws for Hinge into the pre-drilled holes. (see Figure 8)
Insert Adjustable Pins into the pre-drilled holes in the side panels and middle panel at the desired
level.
Place Shelf (H) into position.
Slide Drawer (Q) into position.
STEP 9
To level the unit, adjust the adjustable levelers on the
stationary frame legs and the posts.
Note : Unit must be level to work properly
Flat Washer
Adjustable Pin
Q
HH
F
G
Q
Head Cap Bolt
Spring Washer
Figure 7
F
i
g
ure
7
Wood Screw for Hinge
Figure 8
Wood Dowel

Assembly Instruction 6 / 7
TOP EXTENSION INSTRUCTIONS
STEP 1
Lift up the Leaf Top.
STEP 2
Holding the Leaf Top up, pull out a back leg from
the unit; then pull out the other back leg.
Note : Unit must be level in order for the back legs to be pulled out.

STEP 2
Slide Q5 into the grooves in Q3
and Q4. Be sure to push Q5 all
the way forward so it meets Q1.
(see Figure 2)
Assembly Instruction 7 / 7
Drawer (Q)
Part List
Q2.
Back Part
2 pcs.
Q3.
Side Part
2 pcs .
Q4
Side Part
2 pcs.
Q5.
Base Part
2 pcs.
Q1.
Front Part
2 pcs.
Q5
Q3
Q4
Q2
STEP 1
Attach Q1 to Q2 and Q4, using
a Phillips screwdriver and
long wood screws (4X), tighten
halfway.
Attach Q2 to Q3 and Q4 using
long wood screws (4X), tighten
halfway. (see Figure 1)
STEP 3
Insert short wood screws (6X)
into the pre-drilled holes in Q5
and tighten. (see Figure 3) STEP 4
Assemble Pull Handle with
machine screws. (see Figure 4)
Tighten all screws used in drawer assembly.
MAKE SURE ROLLER
IS ON THE BACK
Q2
Q3
Q4
Q1
Q1
Q5
Q1
Q3
Q4
Figure 1
Figure 2
Figure 4
Figure 3
Q5
Q
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
4
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
Q
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Figure 2
Q5
.
Base Part