Home Styles French Countryside Pantry User manual

Home Styles ConsumerAssistance: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
Part List
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the wood parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
88 5518 651
French Countryside
Pantry
For assembly see instructions in carton 88 5518 652
J.
Back Post
1 pc.
A.
Top
1 pc.
B.
Front Rail
1 pc.
C.
Side Panel
1 pc.
D.
Side Panel
1 pc.
E.
Shelf
2 pcs.
F.
Door
1 pc.
G.
Door
1 pc.
I.
Back Panel
2 pcs.
H.
Back Rail
2 pcs.

Home Styles ConsumerAssistance: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
Tools required for assembly : Phillips screwdriver Tools recommended for assembly : Level
Part List
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the wood parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
88 5518 652
French Countryside
Pantry
For assembly also need the following: 88 5518 651
J.
Back Post
1 pc.
K.
Shelf
1 pc.
B.
Front Rail
1 pc.
L.
Side Panel
1 pc. M.
Side Panel
1 pc.
E.
Shelf
2 pcs.
F.
Door
1 pc.
G.
Door
1 pc.
Adjustable Pin
16 pcs. (+1 extra)
I.
Back Panel
2 pcs.
Hardware List
N.
Bottom
1 pc.
Key Wrench
1 pc.
Small
Key Wrench
1 pc.
Pull Handle
4 pcs.
Cam Lock
28 pcs. (+1 extra) Wood Screw
16 pcs. (+1 extra) Machine Screw
4 pcs.
Cam Lock Screw
28 pcs. (+1 extra)
H.
Back Rail
2 pcs.

IMPORTANT
* Do not tighten up all the screws until each part is properly assembled.
* You should keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* Use a soft cloth between these parts and the floor.
*After assembly, item must be level to work properly. Use the included adjustable levelers to level.
STEP 1
Insert Cam Lock Screws into the pre-drilled holes of Top (A), Side Panel (C),
(D), (L), and (M). (see Figure 1)
Insert Cam Lock Screws in the pre-drilled holes of Self (K) in the bottom side
only.
M
M
L
L
Cam Lock Screw
D
D
C
C
Assembly Instruction 2 / 6
K
K
A
A
Figure 1

I
I
STEP 2
Attach Bottom (N) to Side Panel
(L) using Cam Locks.
(see Figure 2)
Attach Back Rails (H) to Side
Panel (L) using Cam Locks.
Slide Back Panel (I) into the
groove in Side Panel (L) and
Back Rails (H).
Attach Back Post (J) to unit.
Slide Back Panel (I) into the
groove in Back Rails (H) and
Back Post (J).
N
N
L
L
I
I
J
J
H
H
H
H
STEP 3
Attach Front Rail (B) to unit using Cam Lock.
Attach Side Panel (M ) to unit using Cam Locks.
Cam Lock
STEP 4
Attach Shelf (K) to the unit using Cam Locks.
Assembly Instruction 3 / 6
Figure 2
Fi 2
STEP
3
B
B
M
M
Cam Lock
TEP
4
K
K
Cam Lock

STEP 5
Attach Back Rail (H) to Side Panel (C) using
Cam Lock.
Slide Back Panel (I) into the groove in Side
Panel (C) and Back Rail (H).
Attach Back Post (J) to unit.
Slide Back Panel (I) into the groove in Back
Rail (H) and Back Post (J).
STEP 6
Attach Front Rail (B) to unit using Cam
Lock.
Attach Side Panel (D) to unit using Cam
Locks.
STEP 7
Attach Top (A) to the unit with Cam Locks.
A
A
D
D
B
B
Cam Lock
Cam Lock
I
I
H
H
I
I
H
H
J
J
Cam Lock
C
C
Assembly Instruction 4 / 6

Assembly Instruction 5 / 6
Figure 3
F
F
STEP 8
Insert Cam Lock screws into the pre-drilled holes in the top of
Shelf (K).
Place unit from Step 7 onto unit from Step 4 and then attach
with Cam Locks.
STEP 9
Insert Adjustable Pins into side panels
at the desired level.
Place Shelves (E) into position.
Attach Doors (F) and (G) to side panels
by sliding the door lift hinges into the
side panel lift hinges. (see Figure 3)
Assemble Pull Handles to Doors (F)
and (G) with Machine Screws.
(see Figure 4)
G
G
E
E
E
E
E
E
E
E
F
F
K
K
Adjustable Pin
Adjustable Pin
G
G
Cam Lock
Screw
Figure 4
Cam Lock

Figure 6
STEP 10
To level the unit, adjust the adjustable levelers on the bottom of unit.
(see Figure 5)
Insert 16X Wood Screws from the back of the unit. (see Figure 6)
Note: Please make sure unit is level before tightening these screws.
Figure 5
Wood Screw
Assembly Instruction 6 / 6
Wood Screw