Home Styles The Orleans 88 5061 15 User manual

IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damage occurring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Part List
Home Styles ConsumerAssistance: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
Hardware List
88 5061 15
The Orleans
Executive Desk
Tools required for assembly : Phillips screwdriver Tools recommended for assembly : Level
A.
Top Unit
1 Pc.
B.
Stretcher
1 Pc.
C.
Side Frame
1 Pc.
D.
Side Frame
1 Pc.
Hex Wrench
1 Pc. Small Hex Wrench 1 Pc. Head Cap Bolt (short) 2 Pcs.(+1 extra) Head Cap Bolt (long) 8 Pcs.(+1 extra) Wood Screw 4 Pcs.(+1 extra)

Assembly Instructions 2
STEP 1
Remove the drawers, then place Top Unit (A) upside down on a soft cloth.
STEP 2
Attach Side Frame C) and Side Frame (D) to Top Unit (A)
with Wood Screws and Head Cap Bolts (long).
Tighten all Bolts with Hex Wrench.
(See figure 1)
A
A
C
D
Figure 1
/3
Head Cap Bolt (long)
Wood Screw
IMPORTANT
* Please keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* Do not tighten up all the bolts until each part is properly assembled.
* Use a soft cloth between these parts and the floor.

Assembly Instructions 3
STEP 3
Attach Stretcher (B) to Side Frame (C) and Side Frame (D) with
Head Cap Bolts (short).
STEP 4
Remove Knobs that are on the inside of the
drawers and attach to the outside of the
drawers with Machine Screws.
STEP 5
Turn the unit its’ upright position.
Slide drawers into position.
To level the unit, adjust the adjustable
levelers on the bottom of unit.
(See figure 2)
Head Cap Bolt (short)
B
C
D
Figure 2
/3