Home Styles St. Ives 88 5051 601 User manual

Part List
Hardware List
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the wood parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
A.
Metal Frame
1 pc.
B.
Metal Frame
1 pc.
C.
Post
1 pc.
D.
Post
1 pc.
E.
Stretcher
1 pc.
Hex Wrench
1 pc.
Small Hex Wrench
1 pc.
88 5051 601
St. Ives
King Headboard
Home Styles Consumer Assistance: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
Head Cap Bolt (short)
4 pcs. (+1 extra)
Head Cap Bolt (long)
6 pcs. (+1 extra)
Head Cap Bolt (middle)
8 pcs. (+1 extra)

STEP 1
Assembly Instructions
Head Cap Bolt (Middle)
Attach Metal Frame (A)
to Metal Frame (B) with
Head Cap Bolts (middle).
IMPORTANT
* Do not tighten up all the screws until each part is properly assembled.
* You should keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* Use a soft cloth between these parts and the floor.
A
B
C
D
E
Head Cap Bolt (long)
Head Cap Bolt (short)
STEP 2
Attach Post (C) and Stretcher (E) to unit with Head Cap Bolts (long) and
Head Cap Bolts (short).
Attach Post (D) to unit with Head Cap Bolts (long) and Head Cap Bolts (short).