Honeywell Q6371A Operation manual

Honeywell
EN0R 8490 R1 1998 42009532-
001 1
Q6371A
FAN SPEED SELECTOR
PRODUCT DATA
DESCRIPTION
The Q6371A is a fan speed selector module for manual operation of
the fan in fan coil installations.
FEATURES
•Attractive modern styling makes this module ideal
for locating in the occupied space in offices or
hotels.
•Slide switches for ease of operation and visual
indication of status.
•On/off switch and fan 1-2-3 speed switch allow
complete control of fan operation.
•Lockable front cover.
•Mounts directly onto a wall, a conduit box, or a fan
coil unit. Mounting screws are supplied
SPECIFICATIONS
Application Manual control of the fan in line
voltage fan-coil installations.
Voltage 230 V~ ±10%, 50/60 Hz
Current 6(4)A at 230 V~
Switches On/off switch
Fan 1-2-3 speed switch
Operational Life Greater than 6,000 operations for
each switch.
Mounting Mounting hole pitch 60mm.
Mounting screws supplied.
Wiring Terminals suitable for wires up to
1.5mm2
Protection Class IP30
Dimensions 83 x 84 x 27 mm
Environmental
Requirements Operating temperature 0 to 40°C Humidity ≤90%rh, non-condensing.
Approvals CE Mark : complies with standards
EN60730-1 (1995), EN55014-1
(1997), and EN55014-2 (1996)
Ordering
Specification Q6371A1006
Honeywell

EN0R 8490 R1 1998 42009532-
001 2
INSTALLATION
Mounting
The Q6371A can be mounted on the wall, or if required, on the body of the fan coil unit. There are 4 mounting hole
locations and mounting screws are supplied.
Wiring
The fan speed selector has screw-in terminals that accept wires up to 1.5mm2. Refer to the wiring schematic for
detailed wiring information.
WIRING SCHEMATIC
8
7
6
1NL
I
II
III
230 V~
FAN
OFF
ON
Q6371A1006
2
6(4)A