Recommended way of connection
Product Overview
Warnings and Safety Notes
03
S6 AC/DC Dual Channel Smart Charger
1. Do not use the charger in an unattended manner, in case of any functional abnormality,please
stop using it and refer to the manual.
2. Keep the charger away from dust, humidity, rain and high temperature, as well as direct expo
sure to sunlight and intense vibration.
3. Input voltage of the charger is 10.5-30V DC. When connecting to the power supply, make sure
that the input voltage match the operating voltage range of the charger.
4. Please place the charger on a heat-resisting, non-flammable and insulating surface. Do not
use it by placing it on the car's seat, carpet or other similar place. Keep inflammable and
explosive objects away from operation areas of the charger.
5. Make sure the heat dissipation hole at the bottom of the charger is not covered while in use,
and ensure the cooling fan smoothly extracts heat.
6. Please fully understand the charging and discharge characteristics as well as the battery‘s
specifications. Additionally, set up proper charging parameters in the charger. Incorrect
setting of parameters can cause damage to the charger and battery ,even give rise to
disastrous consequences such as fire and explosion.
7. When charging or discharging is completed, please first press the speed shuttle key to terminate
the current task, then remove the battery when the charger shows the standby screen.
1、Connect power supply to the charger, wait for the system to
complete its self-checking ;
2、Choose the channel that is linked with the battery ;
3、Through scrolling the Speed Shuttle key and the screen to set
the task parameters suitable for the battery ;
4、Enjoy。
