HP J9405B Assembly instructions

EL-MF877-00 Page 1
Template Revision A
Product End-of-Life Disassembly Instructions
Product Category:
POWER
SUPPLY
Marketing Name / Model
[List multiple models if applicable.]
MODEL:
J9405B (
HP ProCurve MSM31x and MSM32x PS
)
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU
directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0
Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description Notes
Quantity
of items
included
in product
晶體 Epoxy+Alloy+Solder non-recyclable
EMI shield Aluminum
Capacitors Non-recyclable 14
Resistor
Socket
Wire
Case
Heat sink
Tape
Tube
Screw
Label
Paste on case
Inductor
Transformer
PCB Non recyclable

EL-MF877-00 Page 2
Template Revision A
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components
and materials requiring selective treatment can be removed.
Tool Description
Tool Size (if
applicable)
pliers.
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:
1. Take out plastic mat and screw.
2. Take out plastic case.
3. Take out EMI Shielding case.
4. Take out mylar film.
6. Take out mix wire.
7. Take out heatsink.
8. Take out copper.
9. Take out socket.
10. Take out solder.
11. Take out inductors.
12. Take out transformer.
13. Take out big capacitor.
14. Left PCBA.
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items
contained in the product that require selective treatment (with descriptions and arrows identifying locations).