HP Officejet 100 User manual

HP Oicejet 100/150
Scan to nd out more
Standard data rates may apply. Might not be available in all languages.
EN © 2013 Hewlett-Packard Development Company, L.P.
The information contained herein is subject
to change without notice.
www.hp.com/go/OJ100_150
Install the HP 1200w NFC/Wireless Mobile Print Accessory
For more information about the wireless mobile print accessory, visit www.hp.com/go/1200wSupport.
To connect the wireless mobile print accessory while using power from the printer
1. Make sure the printer you are connecting is turned on.
2. Using the USB cable provided, connect the wireless mobile print accessory and the printer.
a. Connect one end (type A at plug) of the USB cable to the USB host port of the wireless accessory.
b. Connect the other end (type B rounded plug) of the USB cable to the USB port of the printer.
3. Using an additional USB cable (not provided), power the wireless mobile print accessory using power from the printer.
You would need an additional USB cable (not provided with the wireless accessory).
a. Connect one end (type B rounded plug) of the second USB cable to the USB device port of the wireless accessory.
b. Connect the other end (type A at plug) of the second USB cable to the USB host port of the printer.
www.hp.com/go/1200wSupport
HP Oicejet 100/150 HP 1200w NFC/Wireless Mobile Print Accessory

2
English
4. Check the status light of the wireless mobile print accessory.
Green light means that the wireless accessory is working properly.
To connect the wireless mobile print accessory while using an alternating current power
2. Using the USB cable provided, connect the wireless mobile print accessory and the printer.
a. Connect one end (type A at plug) of the USB cable to the USB host port of the wireless accessory.
b. Connect the other end (type B rounded plug) of the USB cable to the USB port of the printer.
3. Power the wireless mobile print accessory.
a. Connect the power adapter plug to the power adapter.
b. Connect one end of the power cable to the wireless accessory.
c. Connect the other end of the power cable to the wall power outlet.
1. Make sure the printer you are connecting is turned on.

3
4. Check the status light of the wireless mobile print accessory.
Green light means that the wireless accessory is working properly.
Using the wireless mobile print accessory as a USB pass-through between the printer and your computer
You can also use the wireless accessory as a USB pass-through between the printer and your computer.
You would need an additional USB cable (not provided with the wireless accessory).
a. Connect one end (type B rounded plug) of the second USB cable to the USB device port of the wireless accessory.
b. Connect the other end (type A at plug) of the second USB cable to the USB host port of the computer.
English