Rev.1.0 -3-
3. Load the paper roll in the sha.
-4-
Paper Sensor
Paper Roll Holders
1
2
Platen
Moveable Label Guides
Print Head Module
Inside View
Loading the Roll
1. Press the le and right cover open lever
with hands simultaneously and li the
printer cover.
2.Hold the paper roll sha and take it out.
Paper roll sha loading
1 inches
Paper roll sha loading
1.5 inches
4.Then load the paper module from the
top down to printer.
5. Pull some paper and pass the it through
paper guides, adjust paper guides acco-
rding to the paper width.
6.Press down the top cover unl it closes.
USB Connection
Power Connection
AC Adapter
Power Cord
OFF ON
1
2
4
3
Varies by Region
1.Make sure the printer is
“OFF”
2.Connect the AC adapter
to printer.
3.Connect the power cord
to AC adapter.
4.Connect the other side
of power cord to the socket
outlet.
Note: tool and driver installaon please refer to SL41 User Manual.
！
