HPRT HD100 User manual
HD100/HD130 User Manual
Changes Record
Rev.
Date
Description
1.0
2016.07.15
--
1.1
2016.10.09
1. Modify the light definition
2.Add the label detector
3.Add the Seagull Drive
4.Add label editing software usage
5.Update tool
6.Update Seagull
1.2
2017.07.10
1. Modify tool
2. Modify Seagull
1.3
2017.09.23
Delete XP using
2.0
2018.05.30
Modify the light definition
2.1
2018.08.06
1.Modify parameters, add EPL directive: P8
2.Add round Hole label diagram: P23
3. Add feed button operation definition: P27-29
2.2
2018..9.5
Modify the tool command
2.3
2019.4.17
New tools: file management and vector font download
HD100/HD130 User Manual
Contents
MANUAL INFORMATION ................................................................................................................... 1
IMPORTANT SAFETY INSTRUCTIONS .................................................................................................. 2
CHAPTER 1 INTRODUCTION ............................................................................................................... 5
1.1 Packing List..........................................................................................................................................5
1.2 Appearance and Components.............................................................................................................6
1.3 Dimension ...........................................................................................................................................7
CHAPTER 2 SPECIFICATIONS............................................................................................................... 8
CHAPTER 3 INSTALLATION & USAGE ................................................................................................ 10
3.1 Media Loading...................................................................................................................................10
3.2 Power Connection.............................................................................................................................13
3.3 Peripherals Connection.....................................................................................................................14
3.4 Detection...........................................................................................................................................15
3.5 Operation Panel ................................................................................................................................22
3.6 Basic Function ...................................................................................................................................23
CHAPTER 4 INTERFACE..................................................................................................................... 27
4.1 USB Interface.....................................................................................................................................27
4.2 Other Optional Interfaces .................................................................................................................27
CHAPTER 5 MAINTENANCE & ADJUSTMENT ...................................................................................... 29
5.1 Cleaning Media Sensor......................................................................................................................29
5.2 Cleaning Thermal Print Head ............................................................................................................29
5.3 Cleaning Roller and/or Paper Path....................................................................................................29
CHAPTER 6 LABEL PRINTER UTILITY INSTRUCTIONS .......................................................................... 30
6.1 Installation Preparation ....................................................................................................................30
6.2 Usage.................................................................................................................................................30
CHAPTER 7 SEAGULL WINDOWS DRIVER INSTRUCTION .................................................................... 41
7.1 Introduction ......................................................................................................................................41
7.2 Installation Preparation ....................................................................................................................41
7.3 Installation ........................................................................................................................................42
7.4 Usage.................................................................................................................................................47
7.5 Removing ..........................................................................................................................................59
HD100/HD130 User Manual
CHAPTER 8 BARTENDER ULTRALITE INSTRUCTIONS .......................................................................... 65
8.1 Introduction ......................................................................................................................................65
8.2 Installation Preparation ....................................................................................................................65
8.3 Installation ........................................................................................................................................66
8.4 Usage.................................................................................................................................................70
Attachment..................................................................................................................................... 80
HD100/HD130 User Manual
◼Statement
This manual content may be altered without permission, and our company reserves the rights
to make changes without notice in technology, spare parts, hardware and software of the
products. If more information is needed about the products, please contact our company.
Without any written permission from our company, any section of this manual is prohibited to
be copied or transferred in any form.
◼Copyright
This manual is printed in 2019, the copyright belongs to Xiamen Hanin Electronic Technology Co.
Ltd.
Printed in China
2.3 Version
◼Warnings
This must be complied with in order to avoid any damage to the human body and the
equipment.
This is showing the important information and tips for the printer operation.
Note: Due to continuous update of our product, the description of printer specification,
accessories, design in this manual may be slightly different. Please keep in kind
prevail.
1
MANUAL INFORMATION
This user manual contains basic information for product usage as well as for emergency
measures that may be required.
The installation and usage of printer driver, utility tool and HPRT BarTender® Ultralite are also
included in the manual.
2
IMPORTANT SAFETY INSTRUCTIONS
Before using the appliance, please carefully read the following safety regulations in order to
prevent any hazard or material damage.
1. Safety warning
Warnings: The print head will become very hot during printing; avoid contact with the
print head after printing has finished.
Warnings: Do not touch the printer head and connector in case static damage the
printer head.
2. Instructions
Warnings: Violating following instructions can cause serious injury or death.
1) Do not plug several products in one multi-outlet.
•This can provoke over-heating and a fire.
• If the plug is wet or dirty, dry or wipe it before usage.
• If the plug does not fit perfectly with the outlet, do not plug in.
• Be sure to use only standardized multi-outlets.
2) You must use the supplied adapter.
• It is dangerous to use other adapters.
3) Do not pull the cable to unplug.
• This can damage the cable, which is the origin of a fire or a breakdown of the printer.
4) Do not plug in or unplug with your wet hands.
• You can be electrocuted.
5) Do not bend the cable by force or leave it under any heavy object.
•A damaged cable can cause a fire.
HD100/HD130 User Manual
3
Note: Violating following instructions may cause slight damage of the appliance.
1) If you observe a strange smoke, odour or noise from the printer, unplug it before
taking following measures.
• Switch off the printer and unplug the set from the mains.
• After the disappearance of the smoke, call your dealer to repair it.
2) Install the printer on the stable surface.
• If the printer falls down, it can be broken and you can hurt yourself.
3) Use the approved accessories only and do not try to disassemble, repair or remodel it
by yourself.
• Call your dealer when you need these services.
• Do not touch the blade of auto cutter.
4) Do not let water or other foreign objects drop into the printer.
• If this happened, switch off and unplug the printer before calling your dealer.
5)Do not use the printer when it is out of order. This can cause a fire or an electrocution.
• Switch off and unplug the printer before calling your dealer.
6) Other considerations:
• Place the printer on a solid and even base so that it cannot fall.
• Leave enough space around printer for operation and maintenance.
• Keep all liquids away from the printer.
• Do not expose the printer to high temperatures, direct sunlight or dust.
• Ensure the printer is connected to a socket with the correct mains voltage.
• Switch off the printer POWER supply when it’s not in use for a long time.
• To ensure the printing quality and reliability, suggest use the same quality or
recommend
paper supplier.
• Pls. switch off the POWER supply when connect/disconnect all the ports or it will
cause
damage to the printer control circuit.
• Never carry out maintenance or repair work yourself. Always contact a qualified
service
Technician.
• Keep this User Manual in a place which is easily accessible at all times.
HD100/HD130 User Manual
4
3.Other Precautions
The copyright for this user manual and various other manuals is property of our company. Any
copying or conversion into electronic form and saving of this material without the express
written permission is strictly prohibited. Use of the information contained in this manual is not
subject to any patent liability. This manual has been prepared with utmost care and attention
to detail but may contain certain errors and/or omissions. Our company is not legally liable for
any damages resulting from the use of the information in this manual. Our company and its
affiliates are not legally liable (United States excluded) for any damages, loss, costs, and/or
expenses that result from the breakdown, malfunction, and/or misuse of the product due to
violation or neglect of the operation and maintenance information and instructions provided by
our company, as well as from the unauthorized alteration, repair, and/or modification of the
product by the user and/or third party. We are not legally liable for any damages and/or issues
resulting from the use of options and/or parts that are not authentic or authorized products.
4.WEEE (Waste Electrical and Electric Equipment)
This mark shown on the product or its literature indicates that the corresponding
item should not be discarded at the end of its working life with others household
waste. To prevent possible harm to the environment or human health from
uncontrolled waste disposal, please separate marked items from other types of
waste and recycle them responsibly to promote the sustained reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their
local government office for details of where and how they can conduct environmentally safe
recycling of such items. Commercial users should contact their suppliers and check the terms
and conditions of purchase contracts. This product should not be combined with other
commercial waste for disposal.
Caution: This is a Class A product. In a domestic environment this product may cause
radio interference in which the user may be required to take adequate measures.
HD100/HD130 User Manual
5
CHAPTER 1 INTRODUCTION
1.1 Packing List
Note:
1. Unpack the printer and keep the packing material in case you need to ship the printer in the
future.
2. Any damages exist, please contact the local dealer.
Printer AC Adapter Power Cord USB Cable
Thermal Label Roll CD Quick Start Guide
Note：The packing materials are based on the order.
HD100/HD130 User Manual
6
1.2 Appearance and Components
￭Front View
￭Rear View
￭Inside View
Note：The views above are for your reference. Ports vary by your choice.
HD100/HD130 User Manual
7
1.3 Dimension
HD100/HD130 User Manual
8
CHAPTER 2 SPECIFICATIONS
(2/1)
Items
Parameter
Printing
Printing Method
Direct Thermal Printing
Resolution
203dpi(8dots/mm)
Printing Speed
127mm/s Max.
Printing Width
108mm Max.
Printing Length
15mm - 1200mm
Processor
NUC976
Memory
RAM
32MB
Flash
16MB
Detection
Sensors
Adjustable reflective sensor, Fixed transmissive
sensor(Central aligned), Head-up sensor
Media
Types
Roll-fed or Fan-fed, Die-cut or Continuous label, Tag
stock, Continuous receipt paper
Width
0.79’’(20mm) – 4.65’’(118mm)
Thickness
0.003’’(76.2um) –0.007’’(177.8um)
Label Roll
Diameter
5’’(127mm)
Core Diameter
0.5’’(12.7mm),1’’(25.4mm),1.5’’(38mm)
Programming Language
TSPL, ZPL, EPL
Software
Label Design
HPRT BarTender Ultralite
Seagull Driver
Windows 2000,Vista,7,8,10
Resident Fonts
Bitmap Fonts
Fonts 0-8 / Fonts A-H,0,GS,P-V 90°, 180°, 270°
rotatable. 10 times maximun expandable in horizontal
and vertical directions.
TTF Fonts
Monotype CG Triumvirate™ scalable true type font
Download Fonts
Bitmap Fonts
90°, 180°, 270°rotatable, single characters 90°, 180°,
270°rotatable
Asian Fonts
16x16, 24x24. Traditional Chinese, Simplified Chinese,
Japanese , Korean
HD100/HD130 User Manual
9
(2/2)
Items
Parameter
Power
AC/DC switching power adapter
I/P: AC100-240V, 50/60Hz, O/P: DC 24V/2.5A
Environment
Operation
41℉(5℃)-104℉(40℃)，30%-85%(non-condensing)
Storage
-4℉(-20℃)-122℉(50℃)，10%-90%(non-condensing)
Physical
Characteristics
Dimension(L*
W*H)
240*198*171mm
Weight
2.26 kg (excluding consumables)
Options & Accessories
External label roll holder for 8’’ (203mm) OD label rolls
Electric cutter module
Label dispenser module
Agency Approvals
CCC,FCC,CE
Code Pages
DOS437,720,737,755,775,850,852,855,856,857,858,860
,862,863,864,865,866,
Windows1250,1251,1252,1253,1254,1255,1256,1257,1
258
ISO8859-1,-2,-3,-4,-5,-6,-8,-9,-15
DBCS 932 (JIS), 936(GBK), 949 (Koran), 950(BIG5)
Barcode
1D
Code 39, Code 93, Code 128UCC, Code 128 subset A, B,
C, Codabar, Interleave 2 of 5, EAN-8, EAN-13, EAN-128,
UPC-A, UPC-E, EAN and UPC 2 (5) digits add-on, MSI,
PLESSEY, POSTNET, RSS-Stacked, GS1 DataBar, Code 11
2D
PDF417, Maxicode, DataMatrix, QR Code, Aztec
Interfaces
Standard
USB,RS232,Ethernet
Option
Bluetooth, WiFi (distributor install)
Operation Panel
Feed button with tri-color LED
※Please refer to the attachment for the detailed information of the FCC & CE certification.
HD100/HD130 User Manual
10
CHAPTER 3 INSTALLATION & USAGE
3.1 Media Loading
3.1.1 Paper Roll Loading
1.Pull and lift the printer cover.
2.Pull the roll holders open and place the roll between them.
HD100/HD130 User Manual
11
3.Press down the locking tab.
4.Pass the labels through label guides and adjust label guides to label’s width.
HD100/HD130 User Manual
12
5.Press the lock and close the cover slightly.
6.Press down the cover until it snaps closed.
HD100/HD130 User Manual
13
3.1.2 External Paper Roll Loading
3.2 Power Connection
1.Make sure the printer’s power switch is in the off position.
2.Connect the AC adapter to power receptacle.
3.Connect the power cord to AC adapter.
4.Connect the other end of power cord to the outlet.
Note：
1. Use the original power adapter only. Avoid the damage caused by charging improperly.
2. Please unplug the printer power cord if it is not in use for a long time.
If the paper roll is extremely large,
users can load the paper roll
outside (See the graph at right).
Pass the paper through the external
feed slot and then through the
paper guides. Adjust the paper
guides according to the paper
width.
HD100/HD130 User Manual
14
3.3 Peripherals Connection
3.3.1 Interface Cable Connection
The standard for the printer’s interface cable shows in the following.
- USB B-Type Cable
- RS-232C Cable
- RJ45 Cable
Please follow the instructions to connect the cable.
1. Make sure the printer is turned off.
2. Please plug in the cables.
-Insert the USB B-Type cable into the USB port.
-Insert the RS-232C cable into the serial port.
-Insert the RJ45 cable into the ethernet port.
3.3.2 Bluetooth Connection
PDA with Bluetooth interface, laptop and other information terminals can drive the mobile
thermal printer. Instructions as follows:
1. Power on printer.
2. Primary device search for outer Bluetooth devices.
3. If there are some outer Bluetooth devices, choose HD100.
4. Finish pairing.
Detailed pairing methods, please refer to primary devices Bluetooth Names. After pairing,
primary devices with virtual Bluetooth interface (smart phone, pocket PC, palm, notebook) can
drive mobile thermal printer to print through such virtual Bluetooth interface.
Note: The original code is 1234.
HD100/HD130 User Manual
15
3.4 Detection
When printing paper, the moveable label sensor is used to detect paper. The label sensor
moves differently when using various kinds of paper. If user moves the sensor improperly,
paper may not be detected, therefore the printer could not print paper. The following
instructions tell users how to use label sensor correctly. Please read it carefully.
3.4.1 Continuous Paper
When printing continuous paper (Figure 1), the sensor shall be aimed at the left photoelectric
hole (Figure 2), which is the original position.
Figure 1 (Continuous Paper)
Other manuals for HD100
1
This manual suits for next models
1
Table of contents
Other HPRT Printer manuals
