Huawei C7500 User manual

C7500
CDMA 1X Mobile Phone
and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.All other
trademarks and trade names mentioned in this document are the property of their respective holders.
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute the warranty of any kind, express or implied.
Huawei Technologies Co.,Ltd.
Address: Huawei Industrial Base, Bantian, Longgang, Shenzhen 518129,
Tel: [phone] Global Hotline: [phone] People's Republic of China
E-mail: mobile@huawei. com Website: www.huawei.com

ei Technologies Co., Ltd.
y
prior written consent of Huawei
Ltd.
emarks
Copyright © 2009 Huaw
All Rights Reserved
No part of this manual may be reproduced or transmitted in an
rm or by any means without
fo
Technologies Co.,
Trad
and other Huawei trademarks are the trademarks or
registered trademarks of Huawei Technologies Co., Ltd. in the
People’s Republic of China and certain other countries.
l other trademarks mention
Al
of ed in this manual are the property spective holders.
ents,
t
e the warranty of any kind, express or implied.
their re
Notice
The information in this manual is subject to change without
notice. Every effort has been made in the preparation of this
manual to ensure accuracy of the contents, but all statem
on, and recommendations in this manual do no
informati
constitut

1
Your Phone
Stylus Pen
Earpiece
Navigation Keys
OK Key
Right Soft Key
End/Power Key
Charger Interface/
Data Cable Connector
Talk/Send Key
Left Soft Key
Screen
Headset Jack

2
Keys and Functions
Press… To…
zPower on or off the phone (by pressing and
holding it).
zEnd a call or reject an incoming call.
zReturn to the home screen.
zView the call log in the standby mode.
zMake or answer a call.
zDisplay the Menu interface in the standby
mode.
zConfirm a selection.
Select the option displayed on the lower left
corner of the screen.
Select the option displayed on the lower right
corner of the screen.
zDisplay the Profiles interface ( ), the
Messages interface ( ), the Create
Message interface (by pressing and
holding ), the Scheduler interface
(), and the Alarms interface ( )
in the standby mode.
Display the Camera menu.

1
Screen Icons
Icon Description Icon Description
Network signal strength Battery power level
No network signal General profile
roaming Silence profile
MMS received Meeting profile
Bluetooth actived Outdoor profile
Message received My profile 1
Memory for messages full My profile 2
Urgent message received Alarm clock on

2
Menu Tree
1All Calls
2MissedCalls
3 Received Calls
4Dialled Calls
5CallMemo
6CallDuration
1CreateMessage
2Inbox
3Outbox
4Drafts
5VoiceMail
6Templates
7Recipient List
8 My Folder
9Settings
0 Delete All
Tools
1 Automatic Tuning
2 Manual Tuning
1 General
2Silence
3 Meeting
4 Outdoor
5MyProfile1
6MyProfile2
1 Display Settings
2Date&Time
3 Call Settings
4PhoneSettings
5 Security Settings
6Restore Fatory
Settings
1Search
2Searchby
3AddNew
4Groups
5 Speed Dial
6 My Number
7 Management
1Recorder
2Alarms
3 Schedulers
4Calculator
5 Stopwatch
6WorldClock
7 Gallery
Profiles
Contacts
Settings
Call History
Brew
Messages Tools
Profiles
Contacts
Settings
Call Log
Radio
Messages
Location
3 Fine Tuning
4 Set Frequency
8XKid
(Options when no
channel saved)
(Options when some
channels saved)
1SwitchOff
2 Speaker On/Off
3StartRecord
4Tuning
5 Delete Channel
6 Rename Channel
ToolsGallery
1Pictures
2Musics
3 Memory Status
ToolsSupplementary
1WAP
2BREW

Installing the Battery
Removing the Battery
Make sure that your phone is powered off.
Charging the Battery
1. Connect the charger to the charger interface at the bottom of your
phone.
2. Connect the charger to an alternating current (AC) power socket.
3. During the charging, the charging icon is displayed in the
animated status.
When the charging icon becomes static, the phone is fully
charged.
4. Disconnect the charger from theAC power socket.
3

U
1. e screen once to select an item
tip onto the screen, and then move the
2. g the phone for the first time, adjust the phone
ay
reen in sequence according
sing the Stylus
A stylus can be used to click and drag:
Click: Use the stylus tip to touch th
or access a menu.
Drag: Press the stylus
stylus to select several characters.
If you are usin
display as follows:
Choose Menu > Settings > Display settings > Displ
adjustment.
Click the cross marks appear on the sc
to the prompts to finish adjusting the phone display.
Using the Function Menu
In the sta1. n ode, select Menu to display the Menu interface.
em, and press
dby m
2. Press the navigation keys to scroll to a menu it
(Select) or to display the menu, or click the ic y to
display
Do the following to display the su
on directl
3. bmenu:
Press (Select)to scroll to a submenu item and press
zor to
zr key corresponding to the number of a submenu
display the submenu.
Press the numbe
to display it.
4. Press (Back) t
function menu. o return to the previous menu or quit the
Alternatively, press to return to the home screen.
Making a Call
In the standby mode, enter a phone number.1.
4

zTo make an international call, press "*" twice to enter the
international long distance code of "+". Then enter the numb
be dialled, in the format of "countr
5
er to
y code + region code + phone
nsion, press "*" three times to insert
nu
2. Press
number".
zTo call mber with an extea nu
"P" or press "*" four times to insert "T" between the phone
ber and the extension.
m
to dial the number.
3. Press to end the call.
Note zcode to unlock
, press
When the phone is locked, enter the lock
the phone first; otherwise, you can make only em ency
calls or answer calls. erg
zIn the standby mode to view the call log.
d press
Select a record an to dial.
zSelect a contact from the phonebook and press to
dial.
Answering a Call
ere is ncoming call, pressWhen th an i , Answer, or to
cal
answer it; Press Silence once to mute the tone and twice to reject the
l; Press to reject it.
If the any key answer
zfunction is enabled, press any key (except
or ) to answer an incoming call.
If the headset auto answer function is enabled
z, and the headset is
phone, the incoming call is answered
on
connected to the
automatically.
zIf the headset is connected to the phone, you can press the butt
on the headset cable to answer or end a call.

6
Phone Lock
The phone lock protects your phone from unauthorized use. The
default phone lock code is 000000. You can change it into any
numeric string of 4 to 8 digits.
If the phone lock is enabled, you need to enter the correct ph
code when the phone is powered on. one lock
PIN and PUK
The personal identity number (PIN) protects your UIM card from
unauthorized use. The PIN unlocking key (PUK) can unblock the
are delivered with the UIM card.
rovider.
enter wrong PUKs for a specified number of times
blocked PIN. Both PIN and PUK
For details, contact your service p
If you enter wrong PINs for pecified number of times
consecutively, th one asks you to enter the PUK code.
If you
a s
e ph
consecutively, the UIM card is invalidated permanently. Contact your
service provider for a new card.
Locking the Keypad
In the standby mode, click to lock the keypad. When the ke
is locked, ypad
press to answer incoming calls or make emergency
e ke tion on
the phone
calls.
When th yguard function is enabled, if there is no opera
for a preset period, the keypad is locked automatically.