Huawei G2158 User manual

G2158
GSM Mobile Phone
User Guide

Copyright © Huawei Technologies Co., Ltd. 2010. All
rights reserved.
Trademarks and Permissions
, , and are trademarks or
registered trademarks of Huawei Technologies Co., Ltd.
Other trademarks, product, service and company names
mentioned are the property of their respective owners.
NO WARRANTY
THE CONTENTS OF THIS MANUAL ARE PROVIDED “AS IS”.
EXCEPT AS REQUIRED BY APPLICABLE LAWS, NO
WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, ARE MADE IN RELATION TO THE ACCURACY,
RELIABILITY OR CONTENTS OF THIS MANUAL.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW,
IN NO CASE SHALL HUAWEI TECHNOLOGIES CO., LTD BE
LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR
CONSEQUENTIAL DAMAGES, OR LOST PROFITS, BUSINESS,
REVENUE, DATA, GOODWILL OR ANTICIPATED SAVINGS.

Table of Contents
Your Phone ............................................................... 1
Keys and Functions.................................................... 2
Screen Icons ............................................................. 5
Installing the SIM Card............................................... 5
Removing the SIM Card.............................................. 6
Charging the Battery.................................................. 6
Using the Function Menu............................................ 7
Making a Call ............................................................ 7
Answering a Call........................................................ 8
Phone Lock ............................................................... 8
PIN and PUK ............................................................. 8
Locking the Keypad.................................................... 9
Changing the Text Input Modes .................................. 9
Multi-tap Input Mode ............................................... 10
Predictive Input Mode .............................................. 10
Entering Digits......................................................... 11
Entering Symbols..................................................... 11
FM Radio (Optional)................................................. 11
Warnings and Precautions ........................................ 12

1
Features marked with "optional" are optional. These
features may vary according to service providers. For
details, contact your service provider.
Your Phone
The following figure shows the appearance of your phone and it
is for your reference only.
1
Screen
7
Flashlight (optional)
2
Navigation key
8
Charger/Headset jack
(optional)
3
Left soft key
9
# key
4
Call/Answer key
10
End/Power key
5
Number keys
11
Right soft key

2
6
* key
12
Earpiece
Keys and Functions
Press…
To…
Make a call.
Answer an incoming call.
View the Dialed calls in standby mode.
Power on or off the phone (by pressing and
holding it for about 3s).
End a call, or reject an incoming call.
Return to the standby mode.
Display Menu in standby mode.
Select the highlighted item.
Display Contacts in standby mode.
Return to the previous menu.

3
Press…
To…
Turn on the flashlight (by pressing and
holding for about 2s or by pressing
twice consecutively) in standby mode
and turn off the flashlight (by pressing
again) in standby mode if the phone
provides the flashlight function.
Access Inbox (by pressing ) if the
phone does not provide the flashlight
function.
Access Alarm clock (by pressing ),
Call Records (by pressing ), and
Browse (by pressing ) in standby
mode.

4
Press…
To…
-
Enter numbers, letters, and characters.
Enter + in standby mode (by pressing and
hold the 0 key for about 3s).
Call the voice mail center in standby mode
(by pressing and holding the 1 key for
about 3s).
Speed-dial phone numbers in standby
mode (by pressing and holding the 2-9
keys for about 3s).
Select a submenu item labeled with the
corresponding number.
In standby mode, press the key once to
enter *, press and hold the key to enter P.
Display the symbol list in any input mode.
Enter #.
Lock the keypad in standby mode (by
pressing and holding the key for about 3s).
Change input modes when editing texts.
If the phone cannot be powered on after you press and
hold , the reason is probably that the battery is
used up. In this case, charge the phone for five minutes
(during this period, the charging animation may be not
displayed on the screen) and power it on again.

5
Screen Icons
Icon
Description
Signal strength.
A new text message is received.
The phone is roaming.
The call forwarding function is enabled.
(Optional)
A headset is connected to the phone.
(Optional)
The FM radio is activated.
An alarm is activated.
The keypad is locked.
Battery charge level.
The Standard profile is activated.
The Conference profile is activated.
The Outdoor profile is activated.
The Mute profile is activated.
The Customize profile is activated.
Missed call(s).
Installing the SIM Card
Before installing the SIM card, ensure that your phone is
powered off. Ensure that the golden contact area on the SIM
card is facing downward, and the beveled corner is properly
aligned with the SIM card slot.

6
Removing the SIM Card
Before removing the SIM card, ensure that your phone is
powered off.
Charging the Battery
1. Connect the charger to an AC power socket.
2. Connect the charger to the charger jack on the phone.
3. Wait until the battery is completely charged.
During the charging, the charging icon is displaying in
animation. When the charging icon becomes static, the
battery is fully charged. Disconnect the charger from the
phone.
4. Disconnect the charger from the AC power socket.
5. Disconnect the charger from the phone.

7
Using the Function Menu
1. In standby mode, press (Menu).
2. Press to select the desired function menu.
3. Press (Select) to display the selected menu.
4. Select a submenu in either of the following ways:
Press to scroll to the desired menu.
Press the number key corresponding to the serial number of
the menu.
5. Press (Select) to display the menu.
6. Press (Back) to return to the previous menu or exit
the function menu.
To return to the standby mode, press .
Making a Call
1. In standby mode, enter the phone number.
To make an international call, press and hold to enter a
plus sign (+). Then enter the country or region code, area
code, and phone number in sequence.
To call an extension, enter the phone number, press and hold
to insert P, and then enter the extension number.
2. Press to dial the number.
3. Press to end the call.