Huawei E270 Instruction Manual

Device Configuration
Step by Step User Guide for U Broadband
(Huawei E270, E156G, E169 & E230)
Modem Installation (E270)
Modem installation (E169/156G)
Step 1
Open the lid and slide in the USIM and
close back the lid
Step 2
Plug in the modem into any available
USB slot
Step 1
Open the lid and slide in the USIM and
close back the lid
Step 2
Plug in the modem into any available
USB slot

Modem Installation (E230)
Step 1
Open the lid and slide in the USIM and
close back the lid
Step 2
Plug in the modem into any available
USB slot
Software Installation
Step 2
Click “I Agree” to accept terms of
agreement
Step 1
Click “Next>” to continue

Step 3
Click “Next>” to continue
Step 4
Click “Install” to continue
Step 5
You will a software installation progress
bar
Step 6
Click “Finish” to continue

Connecting to
U Broadband
Step 1
If your USIM is requesting PIN, please
key your PIN number and click “OK”.
Default PIN = 1234
Step 2
Go to “Tools” and click on “Option”
Step 3
Click on “NEW”
Step 4
Key in the following and click Save
Profile name: U Broadband
APN: Select Static and key-in my3g
Access number: *99#

Step 5
Click on “OK”
Step 6
Click on “Connect”
Step 6
The red arrow and green arrow represent upload & download speed respectively.
To disconnect from U Broadband, click “Disconnect” and click to on the red “X” to exit application

Step 7
To open application and reconnect again, click on Mobile Partner icon on your desktop
and click “Connect”